下载中心

NI PXI Firmware and Additional Drivers 19.0 Win32/64Eng PXIe-8398固件及其他驱动19.0

PXIe-8398固件及其他驱动
PXIe-8398固件及其他驱动支持PXIe-8398 PXI远程控制模块。
PXIe-8398固件及其他驱动包括PXIe-8398 PXI远程控制模块的固件。该固件可帮助您设置和控制PXIe-8398的运行方式。

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

发布日期：2019/1/14
包含的版本：2019完整版 版本号19.0
受支持的操作系统：
Windows 10 64-bit
语言：德语，日语，英文
应用程序位数：32/64位
校验和：
文件大小: 271243 字节 (264.89 KB)
修改日期: 2022-07-12 09:47
MD5: 8cabc3f96cdbc4f3e64125fd9737334a
SHA1: e4e98c34c0b350070bacc51901d994a6cd6901d4
SHA256: 08b1a3bbbe1c225cb1454eb7e107a733cc1dc27d4aedcfe4b7d9964c0184594c
CRC32: 9e621117

百度网盘与NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址

NI PXI Firmware and Additional Drivers 19.0 Win32/64Eng PXIe-8398固件及其他驱动19.0

http://pcmv.cn/thread-29309-1-1.html?fromuid=9

(出处: 机器视觉论坛)

National Instruments MXI Express Firmware Update

© 2013 National Instruments Corporation. All rights reserved.

This file contains instructions on how to update a National Instruments PXI Express Remote Controller.

This readme contains the following main sections:

• Supported Hardware

• Software Requirements

• Upgrade Instructions - LVRT 2010 SP1

• Upgrade Instructions - General

• Contacting National Instruments

• Patent Information
  

Supported Hardware

The following National Instruments PXI Express Remote Controller currently support firmware update:

• NI PXIe-8360

• NI PXIe-8370

• NI PXIe-8375

• NI PXIe-8381

• NI PXIe-8388

• NI PXIe-8389
  

Software Requirements

Updating the firmware on your MXI Express hardware requires:

• PXI Platform Services 3.2.1 (or later)

• Supported Operating Systems
  

• Windows XP (x32), Vista (x32/x64), 7 (x32/x64), or 8 (x32/x64)

• LVRT 2010 SP1, LVRT 2011 SP1, LVRT 2012 SP1
  

Upgrade Instructions for LVRT 2010 SP1 Systems

Follow the instructions below to update your National Instruments PXI Express Remote Controller(s):

• Download and save firmware image and "PXI Platform Services Firmware Updater.vi" to the host machine.

• On the system, open the "PXI Platform Services Firmware Updater.vi" VI in LabVIEW.

• Click the Run arrow.

• Select the target system where the device to be updated is located.
  

• localhost is the local system that is running the VI

• From the drop down menu you can select a Remote Target that has been identified in MAX.

• Or you can manually type in the Remote Target IP Address in the box.
  

• Navigate to and select the firmware image file saved in step 1, click the OK button.

• After a few moments, a dialog box should appear:
  

• If the box states "X device(s) updated successfully.", power cycle the remote controller(s) by following the additional instructions in the output box.

• If the box states that an issue occurred, record the error number/message and Contact National Instruments.
  

• Click the Exit button.
  

Upgrade Instructions for Other Operating Systems

Follow the instructions below to update your National Instruments PXI Express Remote Controller(s):

• Download and save firmware image to the system containing the remote controller(s) to be updated. If the system containing the remote controller is running LabVIEW RT, save the firmware image onto the host machine.

• On the system, use Measurement & Automation Explorer to navigate to the NI Web-Based Monitoring and Configuration page.
  

• For Windows systems: Right click My System and select Web Configuration.

• For RT systems: Expand Remote Systems. Locate and right-click the target system and select Web Configuration.
  

• Each controller must be updated separately. For each controller to be updated:
  

• If the dialog states "The firmware update completed successfully", power cycle the remote controller by following the additional instructions in the dialog box.

• If the dialog states that an issue occurred, record the error number/message and Contact National Instruments.
  

• If the version is as you expected, select the Begin Update button.

• If the version is not as you expected, select the Cancel button and confirm the download in step 1.
  

• A dialog box should open containing information about the firmware image selected.
  

• Locate and expand the chassis containing the remote controller to be updated.

• Select the remote controller in the left most pane, then click the Update Firmware button in the right pane.

• Navigate to and select the firmware image file saved in step 1, then click the Open button.
  

• Confirm the version number displayed is as you expected.
  

• After a few moments, a dialog box should appear:
  

Contacting National Instruments

Thank you for your interest in PXI Platform Services. We appreciate communicating with the people who use our products. We are also very interested in hearing about the applications you develop using our products. Our Web site, ni.com, provides advanced support and services and contact information.

Patent Information

For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.