下载中心

NI-XNET 2022 Q3 Driver x64Win11 32/64bit Eng/Ger/Jpn NI-XNET仪器驱动程序22.5下载

NI-XNET
NI-XNET为配置、开发和调试应用程序提供支持，适用于汽车以太网、CAN、LIN和FlexRay网络的原型验证、仿真和测试。
NI-XNET是一个NI仪器驱动程序，具有一组易用的常见功能，用于读写PXI、PCI、NI CompactDAQ和NI CompactRIO等不同平台的汽车以太网、CANI、LIN和FlexRay帧和信号。NI-XNET CAN、LIN和FlexRay接口经优化，适合需要对数百个CAN帧和信号进行高速实时操作的应用，如硬件在环仿真、快速控制原型、总线监控和自动化控制等。

从NI-XNET 21.0版本开始，仅支持64位的Win10/WinServer 2016/WinServer 2019系统，但是仍然支持64位系统下的32位LabVIEW。

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

发布日期：2022/7/23
包含的版本：2022 Q3完整版 版本号22.5.0
受支持的操作系统：
Windows 11
Windows Server 2022 64-bit
Windows 10 64-bit
Windows Server 2016 64-bit
Windows Server 2019 64-bit
语言：德语，日语，英文
应用程序位数：32/64位
校验和：
文件大小: 1908131840 字节 (1.78 GB)
修改日期: 2022-07-23 10:06
MD5: 43102678095e3224644881738d1c6a92
SHA1: 9e2da1a5f4509c95229a20788744908b0d9b98f0
SHA256: 70a27f35b220232fc27617538823d821fad68e6f37ca7452c516afcd5b211bb9
CRC32: 0ecacf85

百度网盘与NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址
[attach]16594[/attach]

NI-XNET 2022 Q3 Readme

July 2022

This file contains installation instructions and compatibility information for NI-XNET 2022 Q3.

You can find more release information on ni.com.

• NI-XNET Release Notes: Known issues, bugs fixed since the last release, and other notes about this release

• NI-XNET Manuals: New features, behavior changes, and other documentation
  

Overview

Supported Operating Systems

Application Software Support

Installation Instructions

Product Security and Critical Updates

New Features

Supported Hardware

Accessing the Documentation

Finding Examples

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 10

Unsupported Windows Operating Systems

NI no longer supports Phar Lap ETS Real-Time Operating System

Legal Information

Overview

NI-XNET is an NI instrument driver that features a common set of easy-to-use functions for reading and writing Automotive Ethernet, CAN, LIN, and FlexRay data on many different platforms including USB, PXI, PCI, NI CompactDAQ, and NI CompactRIO.

Supported Operating Systems

NI-XNET 2022 Q3 supports the following operating systems:

• Windows 11

• Windows 10

• Windows Server 2022

• Windows Server 2019

• Windows Server 2016

• NI Linux® Real-Time
  

Note Refer to Unsupported Windows Operating Systems for more information about support for Microsoft Windows OSes.

Note NI-XNET no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. NI-XNET 2022 Q3 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI-XNET 2022 Q3 to an unsupported OS. Additionally, after installing NI-XNET 2022 Q3, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.

For more information about the changes to our OS support, visit https://www.ni.com/r/win32bitsupport.

Application Software Support

NI-XNET 2022 Q3 supports the following application software versions, including service packs. If you are not using NI application software, refer to Microsoft Visual Studio Support.

This product no longer supports LabVIEW NXG. Refer to LabVIEW NXG on ni.com for more information about LabVIEW NXG Life-Cycle Dates and driver version support.

Microsoft Visual Studio Support

Installation Instructions

Download the NI-XNET installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using Package Manager.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.

New Features

• Added support for LabVIEW 2022.

• Replay/Immediate Output Stream Timing: If an XNET session is running on a CAN interface with Output Stream Timing set to ReplayExclusive or ReplayInclusive, you can now open a second stream output session on the same interface with Output Stream Timing set to Immediate.
  

Supported Hardware

Visit NI Hardware and Operating System Compatibility to view driver, desktop operating system, and real-time operating system support for individual hardware devices.

To view information for your device:

• Select your hardware model in the dropdown list on the page to view compatibility information for your device.

• Type your hardware model number in the dropdown list on the web page to filter the list of available devices.
  

Note: Some compatibility information may only be available in the archive attached to the NI Hardware and Operating System Compatibility page. For historic driver and OS support information, refer to the readme for the relevant driver version.

Additional Hardware Support Information

The following list details the hardware models supported in NI-XNET 2022 Q3:

• USB-8501 Low-Speed/Fault Tolerant USB CAN Interface Device

• USB-8502 High-Speed/FD USB CAN Interface Device

• USB-8506 USB LIN Interface Device

• PCI-8511 Low‑Speed/Fault-Tolerant CAN Interface Device

• PCI-8512 High‑Speed/FD CAN Interface Device

• PCI-8513 Software‑Selectable/FD CAN Interface Device

• PCI-8516 PCI LIN Interface Device

• PCI-8517 FlexRay Interface Device

• PCIe-8510 PCIe Vehicle Multi-Protocol Interface Device

• PXI-8511 Low-Speed/Fault Tolerant PXI CAN Interface Module

• PXI-8512 High-Speed, Flexible Data Rate PXI CAN Interface Module

• PXI-8513 Software-Selectable PXI CAN Interface Module

• PXI-8516 PXI LIN Interface Module

• PXI-8517 PXI FlexRay Interface Module

• PXIe-8510 PXI Vehicle Multiprotocol Interface Module

• PXIe-8521 100BASE-T1 PXI Automotive Ethernet Interface Module

• PXIe-8522 1000BASE-T1 PXI Automotive Ethernet Interface Module

• PXIe-8523 100/1000BASE-T1 PXI Automotive Ethernet Interface Module

• PXIe-8623 100BASE-TX/1000BASE-T PXI Automotive Ethernet Interface Module

• TRC-8542 CAN HS/FD Transceiver Cable

• TRC-8543 CAN HS/FD or LS/FT Transceiver Cable

• TRC-8546 LIN Transceiver Cable
  

C Series modules:

• NI 9860 C Series Vehicle Multiprotocol Interface Module

• NI 9861 Low-Speed/Fault Tolerant C Series CAN Interface Module

• NI 9862 High-Speed, Flexible Data Rate C Series CAN Interface Module

• NI 9866 C Series LIN Interface Module
  

Supported platforms for XNET C Series modules:

• CompactDAQ—NI-DAQmx 17.1 (or later) is required for:
  

• USB Chassis: cDAQ-9171, cDAQ-9174, cDAQ-9178, and cDAQ-9179

• Ethernet Chassis: cDAQ-9181, cDAQ-9184, and cDAQ-9188

• Wireless Chassis: cDAQ-9191

• cDAQ Controller: cDAQ-9138 (Windows only) and cDAQ-9139 (Windows only)

• cDAQ Controller: cDAQ-9132 (Windows and RT) and cDAQ-9134 (Windows and RT)

• cDAQ Controller: cDAQ-9133 (Windows and RT) and cDAQ-9135 (Windows and RT)

• cDAQ Controller: cDAQ-9136 (Windows and RT) and cDAQ-9137 (Windows and RT)

• Ethernet Chassis: cDAQ-9185 and cDAQ-9189
  

• CompactRIO—CompactRIO 20.0 (or later) and LabVIEW 2017 (or later) are required for the following targets:
  

• Integrated CompactRIO Real-Time Controller: cRIO-906x, and cRIO-903x

• Single-Board RIO: sbRIO-9627, sbRIO-9607

• CompactRIO Real-Time Controller: cRIO-9032, cRIO-9037

• CompactRIO Real-Time Controller: cRIO-9035 (Sync), cRIO-9039 (Sync)

• When using a cRIO-903x or cRIO-906x, a bit stream is not needed with NI 986x modules in the project

• When using a cRIO-903x, cRIO-906x, or sbRIO-96x7, installation in the "Other" programming environment is not supported

• CompactRIO Real-Time Controller: cRIO-9040, cRIO-9042, cRIO-9043, cRIO-9045, cRIO-9046, cRIO-9047, cRIO-9048, and cRIO-9049

• When using a cRIO-904x, NI 986x modules will only be usable in Real-Time mode, and no bit stream is necessary
  

• CompactRIO—CompactRIO 20.0 (or later) and LabVIEW 2018 (or later) are required for the following targets:
  

• CompactRIO Real-Time Controller: cRIO-9053, cRIO-9054, cRIO-9056, and cRIO-9057

• When using a cRIO-905x, NI 986x modules will only be usable in Real-Time mode, and no bit stream is necessary
  

• CompactRIO—CompactRIO 20.0 (or later) and LabVIEW 2019 (or later) are required for the following targets:
  
  

• Single-Board RIO: sbRIO-9603, sbRIO-9608, sbRIO-9609, sbRIO-9628, sbRIO-9629, sbRIO-9638

• When using an sbRIO-9603, sbRIO-9608, sbRIO-9609, sbRIO-9628, sbRIO-9629, or sbRIO-9638, NI 986x modules will only be usable in Real-Time mode, and no bit stream is necessary
  

Note  NI-XNET software supports only NI Automotive Ethernet, CAN, FlexRay, and LIN hardware products. For information about software for CAN products from other vendors, refer to the documentation you received with those products.

Accessing the Documentation

Refer to the NI-XNET documentation, accessible from the Help menu in LabVIEW, for information about NI-XNET.

Finding Examples

Select Help»Find Examples from LabVIEW to launch the NI Example Finder.

You can find Automotive Ethernet, CAN, FlexRay, and LIN examples under Hardware Input and Output in the Example Finder.

LabVIEW examples for NI-XNET are located in the National InstrumentsLabVIEWexamples ixnet directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.

If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.

For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.

Using NI Software with Microsoft Windows 10

For more information about NI support for Windows 10, refer to NI Product Compatibility for Microsoft Windows 10.

Unsupported Windows Operating Systems

NI-XNET no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. NI-XNET 2022 Q3 (and later) may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit https://www.ni.com/r/win32bitsupport.

NI No Longer Supports Phar Lap ETS Real-Time Operating System

NI Software no longer supports Phar Lap ETS Real-Time Operating System. NI-XNET 2022 Q3 (and later) may not install or execute correctly on this operating system. For high-level information on the support roadmap for Phar Lap and its replacement, NI Linux Real-Time, visit ni.com/r/xf35k1. To find out what hardware is supported on PXI controllers running NI Linux Real-Time, visit ni.com/r/b7g5wi.

Legal Information

Copyright

© 2009–2022 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

• EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

• Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
  

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.