石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI Vision Acquisition Software 2015.02 LabVIEW2014SP1 Win32/64Eng 视觉采集软件VAS2015February下载

文章来源:石鑫华视觉网时间:2022-06-24 17:15:56 点击:240

Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Vision Acquisition Software 2015.02 LabVIEW2014SP1 Win32/64Eng 视觉采集软件VAS2015February下载
NI视觉采集软件(相机驱动),包含IMAQ、IMAQdx等,支持驱动AVT、Basler、TELI、JAI、SONY、TheImagingSource、SVS等三方工业相机。
2015.02版,支持LabVIEW2014SP1、VisionDevelopmentModule2014SP1、VisionBuilder2014SP1等NI视觉软件与开发平台。

百度网盘下载:
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看

NI官方下载地址:
标准下载:
请购买附件下载查看
下载器下载:
请购买附件下载查看

文件大小: 2376513454 字节 (2.21 GB)
修改日期: 2015-03-14 16:50
MD5: e6bf90c5b80b0e64acb22cfe43025b07(官方正确)
SHA1: c4fcd43f63e8fd1b83c1e400db29609257962c1a
SHA256: f6f945c7b3b7f887b69fb2e0af78eb1b2b5fdcb488fed1f4a8898b4623c6c96d
CRC32: 82b22ccb

NI Vision Acquisition Software 2015.02 LabVIEW2014SP1 Win32/64Eng 视觉采集软件VAS2015February下载

http://pcmv.cn/thread-7021-1-1.html?fromuid=9

(出处: 机器视觉论坛)



NI Vision Acquisition Software Release Notes

February 2015
This file contains important information about National Instruments Vision Acquisition Software, including installation instructions, new features, fixed issues, and known issues.
Overview
System Requirements
NI Application Software Support
New Features
Updates and Improvements
Installation Instructions
Configuring NI-IMAQ
Configuring NI-IMAQdx
Automating the Installation of NI Products
Known Issues
Documentation and Examples
How to Use NI Software with Microsoft Windows 8
NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003
Legal Information

Overview

NI Vision Acquisition Software allows you to acquire, display, and save images; control digital I/O on National Instruments image acquisition devices; and configure your driver software and hardware.
NI Vision Acquisition Software includes the following drivers:
  • NI-IMAQ is driver software for NI 17xx smart cameras, as well as analog, parallel digital, and Camera Link image acquisition devices.

  • NI-IMAQdx is driver software that supports NI 177x smart cameras, as well as IEEE 1394, GigE Vision, DirectShow-compatible USB, USB3 Vision cameras, and IP cameras.

  • NI-IMAQ I/O is driver software for controlling reconfigurable input/output (RIO) on image acquisition devices and real-time targets. The following hardware is supported by NI-IMAQ I/O:

    • NI CVS-1457RT

    • NI CVS-1458RT

    • NI CVS-1459RT

    • NI EVS-1463RT

    • NI EVS-1464RT

    • NI PCI-8254R

    • NI PCIe-8255R

    • NI PCIe-8237R

    • NI PCIe-1473R

    • NI PCIe-1473R-LX110

    • NI 1483R FlexRIO Adapter Module

Refer to the NI Vision website at ni.com/vision for the latest information about NI Vision Acquisition Software.

System Requirements

The development computer must meet the following requirements to run NI Vision Acquisition Software:
Processor
Pentium 4 1 GHz or equivalent
Memory
512 MB RAM
Display
1,024 × 768 resolution video adapter with a 16-bit display
Minimum Recommended
Free Hard Disk Space
NI Vision Acquisition Software
3.5 GB
NI-IMAQ
1.5 GB
NI-IMAQdx
1.5 GB
NI-IMAQ I/O
2.5 GB
Operating System
  • Windows 8.1 (32- and 64-bit)

  • Windows 8.0 (32- and 64-bit)

  • Windows 7 (32- and 64-bit)

  • Windows Vista (32- and 64-bit)

  • Windows XP SP3 (32-bit)

  • Windows Server 2012 R2 (64-bit)

  • Windows Server 2008 R2 (64-bit)

  • Windows Server 2003 R2 (32-bit)

NI Application Software Support

The following table lists the NI application software versions, including service packs, supported by the NI Vision Acquisition Software. The installer specifically allows side-by-side installations of NI Vision Acquisition Software for each of the supported versions of LabVIEW, enabling you to use the NI Vision Acquisition Software with multiple versions of LabVIEW. National Instruments recommends that you install LabVIEW, LabVIEW Real-Time, and any other supported development environment before installing NI Vision Acquisition Software.
NI Application SoftwareVersions Supported by NI Vision Acquisition Software
NI LabVIEW
2011, 2012, 2013, 2014
NI LabVIEW Real-Time Module
2011, 2012, 2013, 2014
NI LabVIEW FPGA Module
2011, 2012, 2013, 2014
NI LabWindows™/CVI™
2010, 2012, 2013, 2014
NI Vision Development Module
7.1 or later
NI Vision Builder for Automated Inspection
2.5 or later

NI Vision Acquisition Software .NET Support

NI Vision Acquisition Software February 2014 was the last version to release updated support for the .NET Framework 2.0, .NET Framework 3.5, and .NET language integration into Visual Studio 2005 and Visual Studio 2008. Visual Studio 2010 and later are not supported.
New versions of NI Vision Acquisition Software will not provide new .NET feature support or development. It is recommended that you begin new development in other supported development environments.

Remote Target Support

NI Vision Acquisition Software February 2013 was the last version of NI Vision Acquisition Software to provide support for the NI 1454, 1455, and 1456 Compact Vision Systems. New software features of NI Vision Acquisition Software will not work on these devices. Backward compatibility for existing applications is maintained.

New Features

This release of NI Vision Acquisition Software includes the following new features.
  • Simplified the software installation experience in MAX by using Recommended Software Sets for Vision Acquisition Software on NI Embedded Vision Systems, NI Compact Vision Systems, and NI 17xx smart cameras. This feature is only available for LabVIEW Real-Time 2014 SP1.

  • Added support for Data Neighborhood in NI CVS-1458RT and CVS-1459RT Compact Vision Systems

NI-IMAQ 14.5
  • Support for LabVIEW 2014 SP1 (32- and 64-bit)

NI-IMAQdx 14.5
  • Support for LabVIEW 2014 SP1 (32- and 64-bit)

  • High performance USB3 Vision driver for Linux Real-Time targets which reduces CPU utilization

  • Ring acquisition mode added for NI-IMAQdx VIs which reduces CPU utilization

  • Support for using the Vision FPGA Transfer VIs in LabVIEW 64-bit with a LabVIEW bitfile that was previously compiled with the LabVIEW FPGA Module to transfer image data between the host and the FPGA

  • Ability to ignore attribute out-of-range errors on GigE Vision and USB3 Vision cameras

NI-IMAQ I/O 14.5
  • Support for LabVIEW 2014 SP1 (32- and 64-bit)

Updates and Improvements

The following list describes issues in previous versions of NI Vision Acquisition Software that are fixed in this release. If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of NI Vision Acquisition Software.
IDFixed Issue
489509USB3 Vision cameras timeout after repeatedly stopping and restarting acquisition, which requires the camera to be unplugged and reconnected before it is usable again.
511043LabVIEW-based applications can crash when connecting to a camera that returns unexpected malformed data.
456871A crash occurs when disabling some Vision Acquisition Software devices in Device Manager.
511238NI 1712, 173x, and 175x smart cameras cannot acquire images to addresses in internal memory higher than 128 MB.
508111The Detailed Help link in the LabVIEW context help window for NI-IMAQdx VIs is not properly linked.
468270, 504970, 497386, 509800, 501862, 492656, 481066Various crash and stability issues with NI Vision Acquisition Software in MAX.
510253NI-IMAQdx, NI-IMAQ, and NI-IMAQ I/O cannot be deployed with development support included in the LabVIEW Application Builder Additional Installers settings.
467119NI SoftMotion cannot be installed to a CVS-1457RT or CVS-1458RT.
40716164-bit addressing for GigE Vision and USB3 Vision cameras is not available. New NI-IMAQdx Read Register2, Write Register2, Read Memory2, and Write Memory2 VIs are available for this purpose.
419914Switching between NI-IMAQ devices in MAX causes a buffer locking error.
369766NI-IMAQdx will not enumerate cameras that advertise GEV 2.0 compatibility.
489363The histogram window in MAX opens to the maximum width of the desktop display area.
508701Closing a histogram window in MAX during a Grab can cause a hang.
479184NI-IMAQ device icons do not display accurate states for device readiness in MAX.
503307The Vision Acquisition Express VI cannot transfer files with NI Linux Real-Time targets.
493233The Vision Acquisition Express VI cannot enumerate all files on NI Linux Real-Time targets.

Installation Instructions

Complete the following steps to install NI Vision Acquisition Software:
Note: You must have administrator access to install NI Vision Acquisition Software.
  • Insert the NI Vision Acquisition Software installation media.

  • If you do not have autorun enabled, double-click autorun.exe. If you have autorun enabled, autorun.exe runs automatically.

  • Follow the onscreen instructions.

NI-IMAQ and NI-IMAQdx integrate with NI MAX, the National Instruments utility for configuring and testing your measurement and automation system. The NI MAX icon appears on your desktop after you install NI Vision Acquisition Software.

Installing from an NI Software Suite or NI Product Bundle

If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.

Configuring NI-IMAQ

Complete the following steps to install an image acquisition device and configure NI-IMAQ:
Note: You must install NI-IMAQ before installing your image acquisition device.
Caution: Power off and unplug the computer before installing your hardware. Wait for any motherboard LEDs to power off before proceeding, since some computers remain powered for some time after being unplugged.
  • Install your image acquisition device, and connect the camera. Refer to the device documentation for specific hardware installation instructions.

  • Run NI MAX.

    • Double-click the NI MAX icon on the desktop. You can use NI MAX to modify camera properties. Once you have saved these properties, they become the default settings for all NI-IMAQ applications.

    • Expand Devices and Interfaces and NI-IMAQ Devices to display a list of the image acquisition devices installed on your computer.

  • Select a camera file, and acquire an image.

    • Use the Snap button to acquire and display a single image with the image acquisition device.

    • Use the Grab button to acquire images continuously. A grab allows you to focus the camera.

    • Click the plus sign next to the image acquisition device to expand the menu tree and list the available channels or ports. Right-click the channel or port to display a list of available cameras.

    • Select the appropriate camera type from the list. Camera type selection varies according to the image acquisition device installed.

    • To change the camera settings, modify the parameters at the bottom of the image viewer panel.

    • You can acquire an image in the following ways:

Tip: For a complete list of supported cameras, right-click the channel or port, select Camera, and click Search ni.com.
Note: Refer to the right side of the MAX user interface, which displays context-sensitive help, for information about configuring image acquisition devices with NI MAX.

Configuring a Remote PXI/Compact PCIe Image Acquisition Device

Use NI MAX to install NI-IMAQ for LabVIEW Real-Time from the host machine onto the target system. The NI-IMAQ for LabVIEW Real-Time components enable the remote device to acquire and analyze images as directed by the host machine.
Note: Install NI-IMAQ and the LabVIEW Real-Time Module on the remote system before you install and configure the image acquisition device. Follow the steps in the NI MAX help window to install software.
Tip: Configuring remote image acquisition devices is similar to configuring local image acquisition devices, except that the procedure for working with camera files is different. Refer to the Measurement & Automation Explorer Help for NI-IMAQ for information about working with camera files on remote image acquisition devices.
  • Launch NI MAX.

  • In the Configuration tree, expand Remote Systems.

  • Expand the appropriate system.

  • Expand Devices and Interfaces.

  • Expand NI-IMAQ Devices.

  • Expand the device you want to configure.

Refer to the Measurement & Automation Explorer Help for NI-IMAQ for information about configuring specific NI image acquisition devices. You can access this help file from the NI MAX Help menu by selecting Help»Help Topics»NI Vision»NI-IMAQ.

Configuring NI-IMAQdx

Complete the following steps to configure NI-IMAQdx.
If you are using a USB camera, ensure that the camera is compatible with DirectShow, and that the camera driver is installed and functioning. For specific information about drivers and camera compatibility, consult your camera manufacturer documentation.
Instructions for configuring an IEEE 1394 or GigE Vision camera are included in the Measurement & Automation Explorer Help for NI-IMAQdx. You can access this help file from the MAX Help menu by selecting Help»Help Topics»NI Vision»NI-IMAQdx.

Installing the High Performance GigE Vision Driver

If you have an Intel Pro/1000 Series gigabit Ethernet Network Interface Card (NIC), it is recommended that you install the High Performance GigE Vision Driver. This will ensure optimized performance and minimal configuration. To associate your hardware with the high performance driver, complete the following steps.
Windows 8.1/8/7/Vista/Server 2012/Server 2008
  • Install the NIC.

  • Right-click the NIC in the Device Manager, and select Update Driver.

  • Choose Browse my computer for driver software.

  • Browse to the driver location. The newest driver version is installed to <National Instruments>NI-IMAQdxStagingNI GigEVisionCurrent.

  • Click Next.

  • Click Close.

Windows XP and Windows Server 2003
  • Install the NIC.

    • If Windows does not prompt you to choose a driver, proceed to step 2.

    • If Windows prompts you to choose a driver, proceed to step 3.

  • Right-click the NIC in the Device Manager, and select Update Driver.

  • Choose not to connect to the Windows Update Web site, and click Next.

  • Choose to Install from a list or a specific location, and click Next.

  • Choose Don't Search. I will choose the driver to install.

  • Click Next.

  • Select National Instruments GigE Vision driver from the list, and click Next. The driver version that is compatible with Windows XP and Windows Server 2003 is installed to <National Instruments>NI-IMAQdxStagingNI GigEVisionWHQL.

  • Click Finish.

Installing the Universal GigE Vision Driver

NI-IMAQdx will work with any standard gigabit Ethernet NIC. To use NI-IMAQdx with a standard gigabit Ethernet NIC, complete the following steps:
  • Install the NIC and any related drivers. Refer to the NIC device documentation for installation instructions.

  • Enable jumbo frames (frame packet size is greater than 1,500 bytes) on your NIC.

    Note: The procedure for enabling jumbo frames on your NIC may vary by manufacturer. Refer to the NIC device documentation for more information about enabling jumbo frames.
    • Right-click the NIC in the Device Manager, and select Properties.

    • Click the Advanced tab, and Jumbo Frames will appear in the Property list if supported by your NIC.

    • Select the largest frame size available and click OK.

  • Disable the Windows Firewall or any additional third party firewalls on the port. Windows Firewall can be disabled on individual ports from the Advanced tab of the Windows Firewall applet.

Configuring Multiple Ports (Windows XP only)

If you plan to use multiple ports with NI-IMAQdx, complete the following steps:
  • Open the Network Connections window in Windows, and select all of the ports that cameras will be connected to by holding <Ctrl> while clicking each port.

  • Right-click one of the selected ports, and choose Bridge Connections.

    Note: If you are not using the High Performance Driver, you will be unable to use jumbo frames on bridged devices.


Configuring NI-IMAQdx for Windows

Complete the following steps to configure NI-IMAQdx for Windows:
  • Connect the camera.

  • Run NI MAX.

    • Double-click the NI MAX icon on your desktop. You can use NI MAX to modify camera attributes. After you have saved these attributes, they become the default settings for all NI-IMAQdx or NI Vision applications.

    • Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.

    • For IEEE 1394 and USB3 Vision cameras, NI-IMAQdx may not be associated with the camera if a third-party driver is installed. If this is the case, change the associated driver by right-clicking the camera and selecting Driver»NI-IMAQdx.

    • Select the camera from the list. You then can view or modify the camera attributes on the Camera Attributes tab located below the image viewer.

Tip: Click the Show Help button to display the help window on the right side of the image viewer. Move your mouse over the properties to view context-sensitive help in the bottom half of the help window.

Configuring NI-IMAQdx for the LabVIEW Real-Time Module

If you are using a Windows development machine, the LabVIEW Real-Time Module, and an RT target, complete the following steps to install and configure NI-IMAQdx:
  • Install NI-IMAQdx software on your Windows development machine.

  • Ensure that your RT target is connected to the same subnet as the Windows development machine.

  • Run NI MAX.

    • Double-click the NI MAX icon on your desktop.

    • Expand the Remote Systems list in the configuration tree.

    • Select your RT target in the list.

    • Configure your network settings. Refer to the Remote Systems Help in NI MAX (Help»Help Topics»Remote Systems) for instructions about configuring network settings.

  • Install NI-IMAQdx on the Real-Time target.

    • Click the Software item below the RT target in the configuration tree.

    • Click Install Software on the NI MAX toolbar to launch the LabVIEW Real-Time Install Software Wizard.

    • Select Vision Software under the version of the LabVIEW Real-Time Module you are using.

    • Click Next.

    • Select any additional add-ons you would like to install to the target machine.

    • Click Next. Review the list of software you selected to install.

    • Click Next to begin downloading the software to the target machine. When NI MAX has finished downloading the software, it restarts the remote device.

    • Click Finish.

  • Connect your camera to your remote system.

  • Press <F5> to refresh the NI MAX configuration tree. Your camera should be listed in the Remote Systems list.

    Tip: Press <F5> to refresh the configuration tree whenever you connect a new device to an RT target.
  • Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.

  • Select the camera from the list. You then can view or modify the camera attributes from the Camera Attributes panel located below the image viewer.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information, refer to the following KnowledgeBase articles:
  • For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.

  • For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.

  • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.

Known Issues

  • Runtime installers are localized for deployment, but the development support installers are not. This could lead to a partially localized installation from a custom-built installer.

  • Some NI Vision Acquisition Software examples listed in NI Example Finder in LabWindows/CVI do not launch properly from the Task view. You can launch them from the Directory Structure view, or you can access the examples from the installed location instead:

    • Windows 8.1/8/7/Vista/Server 2012/Server2008—C:UsersPublicDocumentsNational InstrumentsCVIversionsamples

    • Windows XP/Server 2003—C:Documents and SettingsAll UsersDocumentsNational InstrumentsCVIversionsamples

NI-IMAQ

  • In LabVIEW 2012 and earlier, error codes returned during a property node read or write are not being reported correctly. The status flag is set correctly, to notify you that an error occurred, but the code is set to an invalid value.

  • In LabVIEW 2012 and later, Project Explorer displays the NI 176x smart camera as a valid real-time target. However, LabVIEW 2012 and later do not support them.

NI-IMAQdx

  • Volume License Manager attempts to check out available NI Vision Development Module licenses before trying NI Vision Acquisition Software licenses.

  • Attempts to extend the evaluation period for NI Vision Acquisition Software licenses from within LabVIEW or the LabVIEW Run-Time Engine are unsuccessful in connecting to the internet.

  • Renaming a camera on some real-time targets may take a long time to complete.

NI-IMAQ I/O

  • On NI CVS-1457RT targets, serial configuration is not available in MAX. Programmatic configuration is still available in Vision Builder AI and LabVIEW.

  • Only one NI PCIe-1473R framegrabber can use the virtual serial port at a time.

  • In LabVIEW 2013 and later, Project Explorer displays the NI 1454, 1455, and 1456 Compact Vision Systems as usable real-time targets. However, LabVIEW 2013 and later do not support them.

Documentation and Examples

Documentation is installed onto your hard drive with NI Vision Acquisition Software. To view the NI Vision Acquisition Software documentation, select Start»All Programs»National Instruments»Vision»Documentation.

NI Vision Acquisition Software Documentation for NI MAX

  • You can access the Measurement & Automation Explorer Help for NI-IMAQ and the Measurement & Automation Explorer Help for NI-IMAQdx from the NI MAX Help menu by selecting Help»Help Topics»NI Vision. These documents are installed to <National Instruments>MAXHelp.

NI Vision Acquisition Software Documentation for LabVIEW

  • You can access the NI-IMAQ VI Reference Help, NI-IMAQdx VI Reference Help, and NI Vision-RIO VI Reference Help from the LabVIEW Help menu.

  • NI Example Finder—Illustrates common applications you can create with NI Vision Acquisition Software. In LabVIEW, select Help»Find Examples. Click the Help button in the NI Example Finder to display the NI Example Finder Help.

NI Vision Acquisition Software Documentation for LabWindows/CVI

  • NI-IMAQ Function Reference Help—Contains reference information about NI-IMAQ functions for LabWindows/CVI. This help file is installed to <National Instruments>NI-IMAQDocs.

  • NI-IMAQdx Function Reference Help—Contains reference information about NI-IMAQdx functions for LabWindows/CVI. This help file is installed to <National Instruments>NI-IMAQdxDocs.

  • Function panel help within LabWindows/CVI—Allows you to right-click within each function to access help for that function, control, function class, and function library. The niimaq.fp, NIIMAQdx.fp, and imaqio.fp function panels are installed to <National Instruments>CVIBin.

  • Example programs are installed to

    • Windows 8.1/8/7/Vista/Server 2012/Server2008—C:UsersPublicDocumentsNational InstrumentsCVIversionsamples

    • Windows XP/Server 2003—C:Documents and SettingsAll UsersDocumentsNational InstrumentsCVIversionsamples

How to Use NI Software with Microsoft Windows 8.x

When you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
Note  NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch NI MAX either from the Start screen or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
Current ApplicationIcon LocationPin to Action
Windows 8.x DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
Windows 8.x DesktopStart screenRight-click application and select Pin to Start
Windows 8.x Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All apps (Windows 8) or click the down arrow on the bottom left of the screen (Windows 8.1).
For more information about NI support for Windows 8.x, visit ni.com/windows8.

NI Vision Acquisition Software Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

NI Vision Acquisition Software will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of NI Vision Acquisition Software that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
ProductInfo Code
NI LabVIEWlifecycle
NI LabWindowsT/CVITcvi_lifecycle
NI Measurement Studiomstudiolifecycle
NI TestStandtslcp
NI DIAdemddlcp
NI SignalExpressselcp
NI VeriStandnivslifecycle

Legal Information

Copyright
© 2015 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
  • Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

  • EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

  • Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.


首页
84162741QQ
联系