石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI Vision Acquisition Software 2014.08F1 LabVIEW2014 Win32/64Eng 视觉采集软件VAS2014AugustF1下载

文章来源:石鑫华视觉网时间:2022-06-24 16:53:22 点击:341

Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Vision Acquisition Software 2014.08F1 LabVIEW2014 Win32/64Eng 视觉采集软件VAS2014AugustF1下载

  • 可以从数千款摄像头中采集、显示、保存和监测图像

  • 使用NI-IMAQ, 采集源自模拟、并行数字和Camera Link的数据; NI智能相机 (免费)

  • 使用NI-IMAQdx, 从千兆以太网视觉、IEEE 1394、IP (Ethernet)、DirectShow (USB)设备 (需要许可证)上采集数据

  • 兼容实时和基于Windows的目标

  • 与NI LabVIE、.NET、C、C++和Visual Basic兼容

  • 包含各类NI视觉硬件和NI视觉软件许可证


NI视觉采集驱动软件,适合采集、显示、记录并监测来自多种摄像头的图像。 

该软件被纳入各类NI视觉硬件(智能相机、视觉系统、帧接收器)和各类NI视觉软件许可证(各类视觉开发模块许可证和用于自动检测的NI视觉生成器许可证,包括:运行时许可证)。 

NI视觉采集软件还可以单买,用于不需要图像处理或专门硬件的安全和监控应用程序。 

本软件包含NI-IMAQ免费驱动程序用于采集源自模拟、并行数字、Camera Link和NI智能相机的数据,并且提供从千兆以太网视觉设备上采集数据的NI-IMAQdx驱动、支持IIDC的IEEE 1394摄像头、 IP (Ethernet)、支持DirectShow的USB设备,如:相机、网络摄像头、显微镜、扫描仪和诸多消费者级的成像产品。


如果需要使用第三方的工业相机,如AVT、Basler、DALSA、TELI、TheImagingSource、IDS、PointGray、SVS等等,需要安装NI的ACQ视觉采集软件,并使用其中的IMAQdx进行图像采集。

Download Language: English
Product Line: Vision Software
Version: August 2014 f1
Release date: 08-27-2014
Software type: Driver

Operating system: Windows 8 32-bit; Windows 8 64-bit; Windows 7 64-bit; Windows 7 32-bit; Windows Vista; Windows XP 32-bit; Windows Server 2008; Windows Server 2003 R2 32-bit

  • Support for LabVIEW 2014 (32- and 64-bit)

  • New IMAQ Get Bayer Parameters for FPGA VI. Requires the LabVIEW FPGA Module 2014

  • Support for the NI CVS-1459RT and the NI cRIO-903x

文件大小: 2319689497 字节 (2.16 GB)
修改日期: 2014-09-01 22:13
MD5: 10948587ff9e7f5bf75f5ba4951818af(官方正确)
SHA1: 7b6d2a43f0315b8a0a279397291b4726435c0319
SHA256: edd8dcac29f420eefe575c6b429ab5651fa6818ff60b3f1f95cd2c56461fcddb
CRC32: 54440891

百度云盘下载:
请购买附件下载查看

NI官方下载地址:
直接下载:
请购买附件下载查看
下载器下载:
请购买附件下载查看

NI Vision Acquisition Software 2014.08F1 LabVIEW2014 Win32/64Eng 视觉采集软件VAS2014AugustF1下载

http://pcmv.cn/thread-4835-1-1.html?fromuid=9

(出处: 机器视觉论坛)



NI Vision Acquisition Software Release Notes

August 2014 f1
This file contains important information about National Instruments Vision Acquisition Software, including installation instructions, new features, fixed issues, and known issues.
Overview
System Requirements
NI Application Software Support
New Features
Updates and Improvements
Installation Instructions
Configuring NI-IMAQ
Configuring NI-IMAQdx
Automating the Installation of NI Products
Known Issues
Documentation and Examples
How to Use NI Software with Microsoft Windows 8
NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003
Legal Information

Overview

NI Vision Acquisition Software allows you to acquire, display, and save images; control digital I/O on National Instruments image acquisition devices; and configure your driver software and hardware.
NI Vision Acquisition Software includes the following drivers:
  • NI-IMAQ is driver software for NI 17xx smart cameras, as well as analog, parallel digital, and Camera Link image acquisition devices.

  • NI-IMAQdx is driver software that supports NI 177x smart cameras, as well as IEEE 1394, GigE Vision, DirectShow-compatible USB, USB3 Vision cameras, and IP cameras.

  • NI-IMAQ I/O is driver software for controlling reconfigurable input/output (RIO) on image acquisition devices and real-time targets. The following hardware is supported by NI-IMAQ I/O:

    • NI CVS-1457RT

    • NI CVS-1459RT

    • NI EVS-1463RT

    • NI EVS-1464RT

    • NI PCI-8254R

    • NI PCIe-8255R

    • NI PCIe-8237R

    • NI PCIe-1473R

    • NI PCIe-1473R-LX110

    • NI 1483R FlexRIO Adapter Module

Refer to the NI Vision website at ni.com/vision for the latest information about NI Vision Acquisition Software.

System Requirements

The development computer must meet the following requirements to run NI Vision Acquisition Software:
Processor
Pentium 4 1 GHz or equivalent
Memory
512 MB RAM
Display
1,024 × 768 resolution video adapter with a 16-bit display
Minimum Recommended
Free Hard Disk Space
NI Vision Acquisition Software
3.5 GB
NI-IMAQ
1.5 GB
NI-IMAQdx
1.5 GB
NI-IMAQ I/O
2.5 GB
Operating System
  • Windows 8.1 (32- and 64-bit)

  • Windows 8 (32- and 64-bit)

  • Windows 7 (32- and 64-bit)

  • Windows Vista (32- and 64-bit)

  • Windows XP SP3 (32-bit)

  • Windows Server 2012 R2 (64-bit)

  • Windows Server 2008 R2 (64-bit)

  • Windows Server 2003 R2 (32-bit)

NI Application Software Support

The following table lists the NI application software versions, including service packs, supported by the NI Vision Acquisition Software. The installer specifically allows side-by-side installations of NI Vision Acquisition Software for each of the supported versions of LabVIEW, enabling you to use the NI Vision Acquisition Software with multiple versions of LabVIEW. National Instruments recommends that you install LabVIEW, LabVIEW Real-Time, and any other supported development environment before installing NI Vision Acquisition Software.
NI Application SoftwareVersions Supported by NI Vision Acquisition Software
NI LabVIEW
2011, 2012, 2013, 2014
NI LabVIEW Real-Time Module
2011, 2012, 2013, 2014
NI LabVIEW FPGA Module
2011, 2012, 2013, 2014
NI LabWindows™/CVI™
2010, 2012, 2013, 2014
NI Vision Development Module
7.1 or later
NI Vision Builder for Automated Inspection
2.5 or later

NI Vision Acquisition Software .NET Support

NI Vision Acquisition Software February 2014 was the last version to release updated support for the .NET Framework 2.0, .NET Framework 3.5, and .NET language integration into Visual Studio 2005 and Visual Studio 2008. Visual Studio 2010 and later are not supported.
New versions of NI Vision Acquisition Software will not provide new .NET feature support or development. It is recommended that you begin new development in other supported development environments.

Remote Target Support

NI Vision Acquisition Software February 2013 was the last version of NI Vision Acquisition Software to provide support for the NI 1454, 1455, and 1456 Compact Vision Systems. New software features of NI Vision Acquisition Software will not work on these devices. Backward compatibility for existing applications is maintained.

New Features

This release of NI Vision Acquisition Software includes the following new features.
NI-IMAQ 14.0
  • Support for LabVIEW 2014 (32- and 64-bit)

NI-IMAQdx 14.0
  • Support for LabVIEW 2014 (32- and 64-bit)

  • New IMAQ Get Bayer Parameters for FPGA VI. Requires the LabVIEW FPGA Module 2014.

  • Support for the NI CVS-1459RT and the NI cRIO-903x

NI-IMAQ I/O 14.0
  • Support for LabVIEW 2014 (32- and 64-bit)

  • Support for the NI CVS-1459RT

Updates and Improvements

The following list describes issues in previous versions of NI Vision Acquisition Software that are fixed in this update. If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of NI Vision Acquisition Software.
IDFixed Issue
482971Vision functions cause a crash on some real-time targets running older versions of the LabVIEW Real-Time Module.
481093Passing an empty image to the RT Video Out VI causes a crash on the NI CVS-1459RT, NI cRIO-903x, and NI cDAQ-913x.
488461Higher refresh rates for full-screen image display are possible on the NI CVS-1459RT, NI cRIO-903x, and NI cDAQ-913x.
486688Rebooting the NI CVS-1459RT, NI cRIO-903x, or NI cDAQ-913x with a USB3 Vision camera attached can cause a hang on initialization.
The following list describes issues in previous versions of NI Vision Acquisition Software that are fixed in this release. If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of NI Vision Acquisition Software.
IDFixed Issue
452799MAX crashes due to presence of files for unsupported analog framegrabbers.
454028Shared variables cannot be used with EtherCAT on the NI CVS-1457RT.
396769The High Performance GigE Vision Driver incorrectly reconfigures network devices on some virtual machines.
317034GigE Vision acquisitions cause system hangs in certain cases where transfers experience high packet loss.
444283LabWindows/CVI 2013 does not automatically detect and include installers for NI Vision Development Module and NI Vision Acquisition Software in the Edit Installer dialog.
430075Bayer decoding on NI 17xx smart cameras and some CompactRIO real-time targets returns an incorrect byte order when an image is decoded multiple times.
470763The Pulse Generation example for 177x Smart Cameras in NI-IMAQdx uses an invalid setting for Pulse Polarity.
443046The Vision Acquisition Express VI defaults to JPEG2000 format for logging.

Installation Instructions

Complete the following steps to install NI Vision Acquisition Software:
Note: You must have administrator access to install NI Vision Acquisition Software.
  • Insert the NI Vision Acquisition Software installation media.

  • If you do not have autorun enabled, double-click <National Instruments>NI-IMAQdxStagingNI GigEVision.

  • Click Next.

  • Click Close.

Windows XP and Windows Server 2003
  • Install the NIC.

    • If Windows does not prompt you to choose a driver, proceed to step 2.

    • If Windows prompts you to choose a driver, proceed to step 3.

  • Right-click the NIC in the Device Manager, and select Update Driver.

  • Choose not to connect to the Windows Update Web site, and click Next.

  • Choose to Install from a list or a specific location, and click Next.

  • Choose Don't Search. I will choose the driver to install.

  • Click Next.

  • Select National Instruments GigE Vision driver from the list, and click Next. The driver version that is compatible with Windows XP and Windows Server 2003 is installed to C:UsersPublicDocumentsNational InstrumentsCVIC:Documents and SettingsAll UsersDocumentsNational InstrumentsCVI<National Instruments>MAXHelp.

NI Vision Acquisition Software Documentation for LabVIEW

  • You can access the NI-IMAQ VI Reference Help, NI-IMAQdx VI Reference Help, and NI Vision-RIO VI Reference Help from the LabVIEW Help menu.

  • NI Example Finder—Illustrates common applications you can create with NI Vision Acquisition Software. In LabVIEW, select Help»Find Examples. Click the Help button in the NI Example Finder to display the NI Example Finder Help.

NI Vision Acquisition Software Documentation for LabWindows/CVI

  • NI-IMAQ Function Reference Help—Contains reference information about NI-IMAQ functions for LabWindows/CVI. This help file is installed to <National Instruments>NI-IMAQdxDocs.

  • Function panel help within LabWindows/CVI—Allows you to right-click within each function to access help for that function, control, function class, and function library. The NIIMAQdx.fp, and <National Instruments>CVIBin.

  • Example programs are installed to

    • Windows 8.1/8/7/Vista/Server 2012/Server2008—versionsamples

    • Windows XP/Server 2003—versionsamples

How to Use NI Software with Microsoft Windows 8.x

When you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
Note  NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch NI MAX either from the Start screen or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
Current ApplicationIcon LocationPin to Action
Windows 8.x DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
Windows 8.x DesktopStart screenRight-click application and select Pin to Start
Windows 8.x Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All apps (Windows 8) or click the down arrow on the bottom left of the screen (Windows 8.1).
For more information about NI support for Windows 8.x, visit ni.com/windows8.

NI Vision Acquisition Software Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

NI Vision Acquisition Software will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of NI Vision Acquisition Software that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
ProductInfo Code
NI LabVIEWlifecycle
NI LabWindowsT/CVITcvi_lifecycle
NI Measurement Studiomstudiolifecycle
NI TestStandtslcp
NI DIAdemddlcp
NI SignalExpressselcp
NI VeriStandnivslifecycle

Legal Information

Copyright
© 2014 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
  • Notices are located in the <National Instruments> directories.

  • EULAs are located in the <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.


首页
84162741QQ
联系