石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI Vision Development Module 2012 Win32/64Eng 视觉开发模块VDM2012 适用LabVIEW2012

文章来源:石鑫华视觉网时间:2022-06-23 12:12:39 点击:244

Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Vision Development Module 2012 Win32/64Eng 视觉开发模块VDM2012 适用LabVIEW2012

NI的机器视觉开发模块(VDM)Vision Development Module 2012,仅含英文版。可以应用于32位的X86 Windows系统,也可以用于64位的X64 Windows系统。如果要想有更好的效果,建议使用Win7 X64+LabVIEW2012 64位版+VDM,多配内存与高级CPU。
NI Vision Development Module 2012 supports LabVIEW 8.6, 2009, 2010,  2011 and 2012, Visual Studio 2005 and 2008, and LabWindows/CVI 8.1 or later. 


百度云盘下载:
EXE版:
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看

ISO版:
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看

NI官方下载地址:
请购买附件下载查看

NI Vision Development Module 2012 Win32/64Eng 视觉开发模块VDM2012 适用LabVIEW2012

http://pcmv.cn/thread-40-1-1.html?fromuid=9

(出处: 机器视觉论坛)


NI Vision Development Module 2012 Readme

June 2012
This file contains important information about National Instruments Vision Development Module and is organized into the following sections:
General Information
New Features
Updates and Improvements
System Requirements
Installation Instructions
How to Activate the NI Vision License
Deploying Vision Applications
Automating the Installation of NI Products
Known Issues
Documentation and Examples
Refer to the Machine Vision Web site at ni.com/vision for the latest information about the NI Vision Development Module.
General Information
Installing this program may remove previous versions of the NI Vision Development Module that are currently installed.
The NI Vision Development Module 2012 supports LabVIEW 8.6, 2009, 2010, 2011, and 2012; Visual Studio 2005 and 2008; and LabWindows™/CVI™ 8.1 or later. The installer specifically allows side-by-side installations of NI Vision for each of the supported versions of LabVIEW, enabling you to use the NI Vision Development Module with multiple versions of LabVIEW. National Instruments recommends that you install LabVIEW, LabVIEW Real-Time, or any other supported development environment, before installing the NI Vision Development Module.
Note: The NI Vision Development Module overwrites existing NI Vision examples and NI Vision VIs. Move modified examples or VIs that you want to save to another directory before installing the NI Vision Development Module.
New Features
This release of the NI Vision Development Module includes the following new features:
  • Support for LabVIEW 2012 (32-bit)

  • Support for LabVIEW 2012 (64-bit)

  • Support for binocular stereo vision

  • Support for the ISO 15415-2004 and AIM DPM-1-2006 Data Matrix grading standards

  • Improvements to the IMAQ Learn Camera Model VI and IMAQ Learn Distortion Model VI. These VIs are more robust and have the ability to suppress noisy calibration grid points.

NI Vision Assistant includes the following additions:
  • LabVIEW code generated from Vision Assistant is optimized for parallel execution

  • Improved support for 2D barcodes:

    • Support for the ISO 15415-2004 and AIM DPM-1-2006 Data Matrix grading standards

    • Support for advanced Data Matrix parameters

    • The Data Matrix, PDF417, and QR barcode reading steps are now combined into one Read 2D Barcode step

Updates and Improvements
The following list describes issues in previous versions of the NI Vision Development Module that are fixed in this release. If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the NI Vision Development Module.
IDFixed Issue
216996The IMAQ Cast VI does not properly cast 16-bit images to 8-bit images.
233278The IMAQ Extract Contour VI sporadically returns internal error 0xBFF60569.
310570When a VI containing an image with vision information runs twice, it crashes.
308871The IMAQ Cooccurrence Matrix VI returns an empty array.
312465When learning a pattern matching template, the template may cause a crash if the template mask covers the entire image.
323636Running some Vision VIs in a timed loop causes LabVIEW 2011 to crash.
327954The IMAQ Block Statistics VI returns NaN for the standard deviation calculation for U16 Images.
324852An OCR Character Set File created in LabVIEW 64-bit cannot be opened in LabVIEW 32-bit.
322706The Nonlinear Calibration example cannot be opened when the Vision Development Module 2011 is installed.
326053Casting an image from U16 to U8 with the IMAQ Cast VI returns incorrect results when using # Shift = 8.
330432An insufficient number of calibration grid points can cause camera model calibration to take too long.
334516, 331987The IMAQ Setup Learn Geometric Pattern 2 VI causes LabVIEW to crash if the image height is larger than 1600 pixels.
341746During calibration, the position of optical center may be incorrect.
336243The NI Calibration Training Interface hangs if saved templates are loaded and learned again.
332998The IMAQ Fit Contour Polynomial VI crashes when the Polynomial Order is greater than or equal to 25 on a closed contour.
349815imaqFindCircularEdge2 has a run-time error: 0x6C965AB7.
358238The IMAQ ImageBorderSize VI crashes when called with the image that was previously disposed.
356436The IMAQ Find Straight Edge 3 VI causes LabVIEW to hang when the ROI Descriptor is not correct.
349901The IMAQ GetPointsOnContour VI might crash under specific circumstances.
System Requirements
The development computer must meet the following system requirements to run the NI Vision Development Module:

MinimumRecommended
Processor233 MHz Pentium or equivalentPentium 4/M or equivalent
Memory256 MB RAM512 MB RAM
Display1,024 × 768 resolution video adapter with a 16-bit display1,024 × 768 resolution video adapter with a 24- or 32-bit display
Free Hard Disk Space
1.4 GB
Operating System
Windows 7/Vista/XP (32-bit)/Server 2008 R2/Server 2003 R2 (32-bit)
Browser
Microsoft Internet Explorer 6.0 or later
Remote Target Support
NI Vision Development Module 2011 SP1 was the last version of NI Vision Development Module to provide support for the NI 1762 Smart Camera and the NI 1764 Smart Camera. New software features of NI Vision Development Module will not work on these devices. Backward compatibility for existing applications will be maintained.
Installation InstructionsInstalling from the LabVIEW 2012 Platform DVDs
If you purchased LabVIEW 2012, you can install all of your LabVIEW products—including the NI Vision Development Module—using the LabVIEW Platform DVDs.
To request additional LabVIEW Platform DVDs, refer to the National Instruments Web site.
Installing from the NI Vision Development Module Installation Media
Complete the following steps to install the NI Vision Development Module from the NI Vision Development Module installation media.
  • Log on as an administrator or as a user with administrator privileges.

  • Insert the NI Vision Development Module installation media.

  • If you do not have autorun enabled, double-click SideCrash1.avi and <CVI>inNIVision.lfp, where <CVI>SamplesVision.

NI Vision for .NET Documentation
The NI Vision .NET documentation merges into the NI Measurement Studio Help. The NI Measurement Studio Help integrates into the Visual Studio Combined Help Collection under the Measurement Studio node in the Table of Contents. In order for links from Measurement Studio help topics to .NET Framework help topics to work, you must install the product documentation for Visual Studio, which installs the MSDN Library. This requires a secondary installation during the Visual Studio installation process.
The NI Measurement Studio Help is in the Microsoft Help 2.0 format and requires a Microsoft Help 2.0 viewer to be displayed. A Microsoft Help 2.0 viewer is installed with both Microsoft Visual Studio and the Microsoft .NET Framework SDK. The SDK is freely available from MSDN at http://www.microsoft.com/downloads. If you do not have either of these products, you will need a standalone Microsoft Help 2.0 viewer to display the documentation. Some Help 2.0 viewers are available for download, such as Helpware's H2Viewer.
  • NI Measurement Studio Help—Contains reference information about NI Vision for .NET objects. Describes how to create machine vision and image processing applications in Visual Basic .NET and C# using the NI Vision Development Module. You can launch the NI Measurement Studio Help in the following ways:

    If you have Measurement Studio installed:


    Trademarks

    National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
    Other product and company names mentioned herein are trademarks or trade names of their respective companies.

    Patents

    For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
    • From the Windows Start menu, select Start»All Programs»National Instruments»<Measurement Studio>»Measurement Studio Documentation, where <Vision>ExamplesdotNET, where <National Instruments>_Legal Information and <National Instruments>SharedMDFLegallicense directory.

    • Review <font face="" "="" style="margin: 0px; padding: 0px; overflow-wrap: break-word;"><National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.


首页
84162741QQ
联系