下载中心

NI Vision Development Module 2011 SP1 Win32/64Eng 视觉开发模块VDM2011SP1 适用LabVIEW2011SP1

文章来源:石鑫华视觉网时间:2022-06-23 12:11:20 点击:251

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Vision Development Module 2011SP1 Win32/64Eng 视觉开发模块VDM2011SP1 适用LabVIEW2011SP1

百度云盘下载：
ISO版：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看
ZIP版：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看

NI官方下载地址（可能无效或无法下载完成）：
请购买附件下载查看

http://pcmv.cn/thread-473-1-1.html?fromuid=9

(出处: 机器视觉论坛)

NI Vision Development Module 2011 SP1 Readme

December 2011

This file contains important information about National Instruments Vision Development Module and is organized into the following sections:

General Information
New Features
Updates and Improvements
System Requirements
Installation Instructions
How to Activate the NI Vision License
Deploying Vision Applications
Known Issues
Documentation and Examples

Refer to the Machine Vision Web site at ni.com/vision for the latest information about the NI Vision Development Module.

General Information

Installing this program may remove previous versions of the NI Vision Development Module that are currently installed.

The NI Vision Development Module 2011 supports LabVIEW 8.6, 2009, 2010, and 2011, Visual Studio 2005 and 2008, and LabWindows™/CVI™ 8.1 or later. The installer specifically allows side-by-side installations of NI Vision for each of the supported versions of LabVIEW, enabling you to use the NI Vision Development Module with multiple versions of LabVIEW. National Instruments recommends that you install LabVIEW, LabVIEW Real-Time, or any other supported development environment, before installing the NI Vision Development Module.

Note: The NI Vision Development Module overwrites existing NI Vision examples and NI Vision VIs. Move modified examples or VIs that you want to save to another directory before installing the NI Vision Development Module.

New Features

This release of the NI Vision Development Module includes the following new features:

Support for the AIM DPM-1-2006 data matrix grading standard

NI Vision Assistant includes the following additions:

Support for NI 177x Smart Cameras
Ability to display either the processed image in the main window or display both the original image and the processed image
Support for multibyte characters in the OCR Training Interface

Updates and Improvements

The following list describes issues in previous versions of the NI Vision Development Module that are fixed in this release. If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the NI Vision Development Module.

ID	Fixed Issue
326478	IMAQ Find Edge crashes if the ROI coordinates are invalid.
326182	IMAQ Read File returns an error (-1074395989) for some PNG files.
326154	The Geometric Pattern Matching VIs do not find matches when the calibration axis is set to Direct.
325436	IMAQ NthOrder Filter runs slower when the horizontal image size is a multiple of 16.
325090	IMAQ Particle Filter 3 takes longer to run on multiple core processors.
324468	IMAQ Flatten Image to String crashes if an image with an empty name is sent as input.
323426	The Vision Assistant Image Correction step causes an access violation in nivissvc.dll after correcting a 16-bit image.
319627	IMAQ Read Data Matrix Barcode 2 does not detect the polarity of some images if Auto-detect is enabled.
319496	IMAQ Learn Distortion Model should also compute perspective calibration.
316390	IMAQ Find Straight Edges 3 crashes with some calibrated images.
312055	The Real-Time display is slow when the image contains a text overlay.
310081	IMAQ Extract removes calibration information.
308930	The Simple Calibration Example does not work as expected.
307976	IMAQ Particle Filter 3 hangs on the NI 17xx Smart Camera.
306290	IMAQ FFT and IMAQ Inverse FFT have memory leaks.
305086	LabVIEW crashes when you try to dispose of multiple calibrated images at the same time.
303694	The LabWindows/CVI API for calibration functions does not match the LabVIEW API.
303324	imaqGetImageInfo and IMAQ Get Image Info do not return units correctly for calibrated images.
302298	IMAQ Set Simple Calibration2 should replace the previous image calibration.
294691	IMAQ Unwrap does not support U16 images for Bi-Linear interpolation.
288789	The Data Matrix reader needs to improve for dotted patterns.
248646	IMAQ Read Image Vision Info causes the NI 17xx Smart Camera to reboot when the template is too large or there is not enough memory.
247217	The Vision Assistant Clamp step returns non-integer values on a binary image.
232997	The IMAQ Fit Contour Ellipse overlay does not respect the start and end angle.

System Requirements

The development computer must meet the following system requirements to run the NI Vision Development Module:

	Minimum	Recommended
Processor	233 MHz Pentium or equivalent	Pentium 4/M or equivalent
Memory	256 MB RAM	512 MB RAM
Display	1,024 × 768 resolution video adapter with a 16-bit display	1,024 × 768 resolution video adapter with a 24- or 32-bit display
Free Hard Disk Space	1.4 GB
Operating System	Windows 7/Vista/XP (32-bit)/Server 2008 R2/Server 2003 R2 (32-bit)
Browser	Microsoft Internet Explorer 6.0 or later

Some National Instruments components require Microsoft Silverlight 4.0. If you use a component that requires Silverlight, a dialog box prompts you to install Silverlight from the Internet. Microsoft Silverlight 4.0 is available from the Microsoft Web site at microsoft.com/silverlight.

Installation InstructionsInstalling from the LabVIEW 2011 Platform DVDs

If you purchased LabVIEW 2011, you can install all of your LabVIEW products—including the NI Vision Development Module—using the LabVIEW 2011 Platform DVDs.

To request additional LabVIEW 2011 Platform DVDs, refer to the National Instruments Web site.

Installing from the NI Vision Development Module Installation Media

Complete the following steps to install the NI Vision Development Module from the NI Vision Development Module installation media.

Log on as an administrator or as a user with administrator privileges.
Insert the NI Vision Development Module installation media.
If you do not have autorun enabled, double-click autorun.exe. If you have autorun enabled, autorun.exe runs automatically.
Follow the onscreen instructions.
(Optional) Activate NI Vision Development Module when prompted by the installer, or activate at a later time using the NI License Manager.

Installing from an NI Software Suite or NI Product Bundle

If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.

How to Activate the NI Vision License

When you run an NI Vision application for the first time, it prompts you to activate a license for the product. If you do not activate a valid license, the NI Vision application will run in Evaluation Mode and continue to prompt you to activate a license on each subsequent launch.

Complete the following steps to activate the NI Vision license through an Internet connection.

Run the product you want to license.
Click Yes when prompted to interactively activate your product.
Ensure that Automatically activate through a secure Internet connection is selected, and click Next.
Enter the product serial number, and click Next.
Enter your registration information, and click Next.

Tip: Enter your email address to receive a copy of your activation code for your records.

Deploying Vision Applications

Deployment refers to developing an application so that it can be distributed, or deployed, on a different computer than the one on which the application was developed. The NI Vision Development Module provides everything you need to deploy custom NI Vision applications to target computers. The NI Vision Development Module provides the following options:

The ability to create NI Vision Run-Time Engine installers, which integrate with the LabVIEW Application Builder, applications built in LabWindows/CVI, or a custom installer.
The ability to install the NI Vision Run-Time Engine directly from the Vision Development Module CD.
One NI Vision Run-Time License, which allows you to install a custom application on a single machine.

The NI Vision Development Module installer contains the run-time engine installer for NI Vision. The run-time engine installer is installed at <Vision>Run-Time Engine, where <Vision> is the location to which the NI Vision Development Module is installed. Visit the Drivers and Updates section of ni.com to download software upgrades for NI Vision and the NI Vision Run-Time installers.

Purchasing NI Vision Deployment Licenses

You must purchase an NI Vision Run-Time License (part number 778044-03) for each target machine onto which you want to install your custom NI Vision application, even if you install the NI Vision Run-Time Engine directly from the NI Vision Development Module CD. The NI Vision Development Module CD ships with one run-time license. Contact a National Instruments sales representative or visit ni.com to purchase additional run-time licenses.

Note: Additional NI Vision Run-Time Licenses do not include a CD. To install additional licenses, use the original NI Vision Development Module CD and the serial number provided by National Instruments.

Using the NI Vision Run-Time Engine

You can call the NI Vision Run-Time Engine installer from the application installer. If you create the application installer with the LabVIEW Application Builder or with LabWindows/CVI, you can direct the installer to call the NI Vision Run-Time Engine installer.

Refer to the LabVIEW Help for more information about the LabVIEW Application Builder. Refer to the NI LabWindows/CVI Help for more information about building and distributing LabWindows/CVI applications.

You can also direct a custom application installer to call the NI Vision Run-Time Engine installer. Refer to the documentation that came with the installer software to learn how to call executables from the custom installer. If you are using a custom installer, call the NI Vision Run-Time Engine installer at the end of the installation procedure because the installer may require the system to be restarted.

To use the NI Vision Run-Time Engine installer, you must add /qn as a command line argument to the run-time engine installer. For example, enter <Vision>Run-Time Engineision2011rte.exe /qn to run the NI Vision Run-Time Engine installer, where <Vision> is the location to which NI Vision is installed.

Distributing LabVIEW Applications

The NI Vision Run-Time Engine installer does not install LabVIEW VIs. If you use the LabVIEW Application Builder to create an application (EXE) or dynamic link library (DLL), the Application Builder automatically includes the VIs used by the application. If you distribute a VI, you must include all subVIs that comprise the top-level VI. You must include the appropriate LabVIEW Run-Time Engine as part of the installation.

Refer to the LabVIEW Help for more information about viewing the hierarchy of VIs and for more information about using the LabVIEW Run-Time Engine.

Distributing LabWindows/CVI Applications

In addition to including the NI Vision Run-Time Engine with the installer, you must include the appropriate LabWindows/CVI Run-Time Engine. Refer to the NI LabWindows/CVI Help for more information about creating an executable, creating a dynamic link library, and distributing applications.

Known Issues

You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the NI Vision Development Module.

Simple calibration is not disposed of properly when you learn simple calibration on an image repeatedly or in a loop. You must remove the calibration information using the IMAQ Remove Vision Info 2 VI to remove the existing simple calibration before learning a new simple calibration by running IMAQ Set Simple Calibration2 VI.
If you want to learn simple calibration on images that already have perspective or microplane calibration, you must remove the calibration information using the IMAQ Remove Vision Info 2 VI, and then run the IMAQ Set Simple Calibration2 VI to learn simple calibration.
To store error statistics on corrected images, you must run the IMAQ Get Calibration Info2 VI before correcting the calibration template image. The Return Error Information input must be set to TRUE.
The IMAQ Get Calibration Info2 VI returns 0 for the X Step and Y Step subparameters of the Grid Descriptor output if the calibration template image was not learned using simple calibration.
Vision Assistant cannot generate C code if a double-byte character exists in the path to Vision Assistant or in the destination path for the generated code.
Some Vision Development Module .NET examples only work if Measurement Studio 8.6 is installed.
The Visual Basic .NET Label example does not compile.
There is no 64-bit Vision API for C or .NET.
Installing the Vision Development Module on a Windows Vista 64-bit computer where Visual Studio 2005 has been recently installed causes compatibility warnings.
The Vision Development Module cannot open two of the installed AVI files, SideCrash2.avi, when running as a 64-bit application.
AVI functionality requires Microsoft DirectX 8.1 or later.
On Windows XP computers with Service Pack 2 installed, NI Vision does not support reading AVI files located in the Local Settings folder, or any subfolders of this folder, when the AVI file uses any of the following compression filters:
Copying the AVI file to another folder resolves this problem.

Indeo® Video 5.10 Compression Filter
Intel Indeo® Video R3.2
Intel Indeo® Video 4.5
Indeo® Video 5.10

Using NI Vision with LabWindows/CVI on a machine that does not support the MMX instruction set may cause an Illegal Operation exception to occur within the LabWindows/CVI environment. This error occurs when DirectX checks for the availability of the MMX instruction set on the machine.
The Vision Assistant Express VI image caching feature is available in LabVIEW 8.2 or later.

Documentation and Examples

The NI Vision Development Module documentation set consists of the following manuals and help files:

NI Vision Concepts Help—Describes the basic concepts of image analysis, image processing, and machine vision. This document also contains in-depth discussions about imaging functions for advanced users.

The following sections describe the documents available for each application development environment and where to find example programs.

NI Vision for LabVIEW Documentation

NI Vision for LabVIEW Help—Describes how to create machine vision and image processing applications in LabVIEW using the NI Vision Development Module. It also describes how to create a real-time vision application using NI Vision and the LabVIEW Real-Time Module.
This document also contains reference information about NI Vision VIs and details about how to use NI Vision with LabVIEW. In LabVIEW, select Help»NI Vision for LabVIEW Help.
Note: The NI Vision for LabVIEW Help combines the NI Vision for LabVIEW User Manual and NI Vision for LabVIEW VI Reference Help from previous releases into one document.
NI Example Finder—Illustrates common applications you can create with NI Vision. In LabVIEW, select Help»Find Examples. Click the Help button in the NI Example Finder to display the NI Example Finder Help.

NI Vision for LabWindows/CVI Documentation

NI Vision for LabWindows/CVI User Manual—Describes how to create machine vision and image processing applications in LabWindows/CVI using the NI Vision Development Module.
NI Vision for LabWindows/CVI Function Reference Help—Contains reference information about NI Vision for LabWindows/CVI functions.
Function panel help within LabWindows/CVI—Allows you to right-click within each Vision function to access help for that function, control, function class, and function library. Function panels are installed at <CVI> is the location to which LabWindows/CVI is installed.
Example programs for specific applications are installed at <CVI>SamplesVision.

NI Vision for .NET Documentation

The NI Vision .NET documentation merges into the NI Measurement Studio Help. The NI Measurement Studio Help integrates into the Visual Studio Combined Help Collection under the Measurement Studio node in the Table of Contents. In order for links from Measurement Studio help topics to .NET Framework help topics to work, you must install the product documentation for Visual Studio, which installs the MSDN Library. This requires a secondary installation during the Visual Studio installation process.

The NI Measurement Studio Help is in the Microsoft Help 2.0 format and requires a Microsoft Help 2.0 viewer to be displayed. A Microsoft Help 2.0 viewer is installed with both Microsoft Visual Studio and the Microsoft .NET Framework SDK. The SDK is freely available from MSDN at http://www.microsoft.com/downloads. If you do not have either of these products, you will need a standalone Microsoft Help 2.0 viewer to display the documentation. Some Help 2.0 viewers are available for download, such as Helpware's H2Viewer.

NI Measurement Studio Help—Contains reference information about NI Vision for .NET objects. Describes how to create machine vision and image processing applications in Visual Basic .NET and C# using the NI Vision Development Module. You can launch the NI Measurement Studio Help in the following ways:
If you have Measurement Studio installed:

If you do not have Measurement Studio installed:

From Visual Studio, select Help»Contents to view the Visual Studio table of contents. The NI Measurement Studio Help is listed in the table of contents.
From the Windows Start menu, select Start»All Programs»National Instruments»<Measurement Studio>»Measurement Studio Documentation, where <Measurement Studio> is the location to which Measurement Studio is installed. The help launches in a stand-alone help viewer.
From Visual Studio, select Measurement Studio»NI Measurement Studio Help.

Example programs for specific applications are installed at <Vision> is the location to which NI Vision is installed.

NI Vision Assistant Documentation

NI Vision Assistant Tutorial—Describes the Vision Assistant software interface and guides you through creating example image processing and machine vision applications.
NI Vision Assistant Help—Contains descriptions of Vision Assistant features and functions and provides instructions for using them. In Vision Assistant, select Help»Online Help.
NI Classification Training Interface Help—Contains information about how to use the NI Classification Training Interface to classify binary samples. In the NI Classification Training Interface, select Help»Online Help.
NI Color Classification Training Interface Help—Contains information about how to use the NI Color Classification Training Interface to classify color samples. In the NI Color Classification Training Interface, select Help»Online Help.
NI OCR Training Interface Help—Contains information about how to use the NI OCR Training Interface to learn characters, save character sets, and verify characters by comparing them to a reference character. In the NI OCR Training Interface, select Help»Online Help.
NI Texture Training Help—Contains information about how to use the NI Texture Training Interface to train a texture classifier file for use in texture defect detection applications. In the NI Texture Training Interface, select Help»Online Help.
NI Calibration Training Help—Contains information about how to use the NI Calibration Training Interface to select and create a calibration for use in machine vision applications. In the NI Calibration Training Interface, select Help»Online Help.
NI Vision Template Editor Help—Contains information about how to use the NI Vision Template Editor to learn and edit template images that you can use with pattern matching, geometric matching, and golden template comparison functions. In the NI Vision Template Editor, select Help»Online Help.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

Trademarks

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

Additional Licenses

This product contains third-party software. Refer to the NI Vision Development Module 2011 Free and Open Source Software Notices for information about applicable notices and licenses. You can access the NI Vision Development Module 2011 Free and Open Source Software Notices by navigating to <Vision>Licenses, where <Vision> is the location to which you installed the NI Vision Development Module, and selecting VDM2011_FOSS_notices.pdf.

下载中心

NI Vision Development Module 2011 SP1 Win32/64Eng 视觉开发模块VDM2011SP1 适用LabVIEW2011SP1