石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI Circuit Design Suite 12.0 Patch Win32Eng/Ger/Jpn NI电路设计套件12.0补丁

文章来源:石鑫华视觉网时间:2022-06-06 12:22:16 点击:221

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Circuit Design Suite 12.0 Patch Win32Eng/Ger/Jpn NI电路设计套件12.0补丁

Circuit Design Suite(CDS)电路设计套件

电路设计套件结合了Multisim和Ultiboard软件，为电路设计、仿真、验证和布局提供了一套完整的工具。
电路设计套件为您提供了直观且经济高效的设计电路工具。您可以执行交互式SPICE仿真并无缝转换到PCB布局和布线软件。该套件专为教学、科研和设计而开发，提供了先进的仿真功能，可以让您清楚地了解电路在各种场景下的性能。

12.0 Pro/Edu Patch
文件大小: 165469769 字节 (157.80 MB)
修改日期: 2012-02-21 22:06
MD5: 26d61bfb2714bd607d547af03d45bdf4（官方正确）
SHA1: fd94e72ec4bb983444bbf95bc1d5435a1045b4e2
SHA256: 0730fb55f4cf6aaf55f18e81c971ee3283f4eb23460e266b5fb097f0061c4033
CRC32: 636eb930

百度网盘与NI官方下载地址：

NI Circuit Design Suite 12.0 Patch Win32Eng/Ger/Jpn NI电路设计套件12.0补丁

http://pcmv.cn/thread-26709-1-1.html?fromuid=9

(出处: 机器视觉论坛)



NI Circuit Design Suite 12.0.1.1 Readme for WindowsBug Fixes

The following is a subset of the issues fixed between Circuit Design Suite 12.0.1 and Circuit Design Suite 12.0.1.1.
Multisim ( 2 )
Bug IDDescription
372141Renaming connectors in a subcircuit or hierarchical block adds duplicate pins to the block symbol.
372125Printing unsaved designs or the spreadsheet view does not work in Windows 8.
Ultiboard ( 1 )
372125Printing unsaved designs or the spreadsheet view does not work in Windows 8.



Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information, refer to the following KnowledgeBase articles:

  • For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.

  • For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.

  • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.


Copyright

© 2006-2012 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

  • Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

  • EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

  • Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

Trademarks

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Electronics Workbench, Multisim and Ultiboard are trademarks of National Instruments. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
Other product and company names mentioned herein are trademarks or trade names of their respective companies.
The EKV MOST model used in this software was developed, implemented and tested by the Electronics Laboratory (LEG) of the Swiss Federal Institute of Technology (EPFL).

Patents

For patents covering the National Instruments products, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or ni.com/patents.


首页
84162741QQ
联系