石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI-USRP 16.0 Driver Win32/64Eng NI通用软件无线电外设仪器驱动程序16.0下载

文章来源:石鑫华视觉网时间:2022-05-13 15:27:23 点击:270

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI-USRP 16.0 Driver Win32/64Eng NI通用软件无线电外设仪器驱动程序16.0下载

NI USRP
NI-USRP支持使用NI通用软件无线电外设(USRP)收发仪和LabVIEW可重配置I/O (RIO) USRP设备的客户。
NI-USRP是一个NI仪器驱动程序，可同时支持软件无线电(SDR)设备和可重配置SDR设备。如果要配置设备，可使用NI-USRP仪器驱动程序中包含的NI-USRP API或USRP RIO仪器设计库(IDL)。NI-USRP可帮助您使用NI SDR硬件创建发射(Tx)和接收(Rx)应用。

16.0
文件大小: 2268573118 字节 (2.11 GB)
修改日期: 2016-08-20 03:31
MD5: 274d1882f1bbaedddba2b21e444897c3（官方正确）
SHA1: c7370bb0ffa43b282e2a655b30e0a846a5175e6e
SHA256: 854973ca9e9bde42cc2989708c312383bdb8980bf8606e4016b5b93adb8640ad
CRC32: 8ac5c927

百度网盘和NI官方下载地址：

NI-USRP 16.0 Driver Win32/64Eng NI通用软件无线电外设仪器驱动程序16.0下载

http://pcmv.cn/thread-25629-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)



NI-USRP 16.0 Readme

July 2016


Thank you for using NI-USRP. This file contains important information about NI-USRP and is organized into the following sections:


New Features
Supported Hardware
System Requirements
Installed Software, Documentation, and Examples
Documentation
Accessing VIs and Functions
Finding Examples and Sample Projects
NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003
Product Security and Critical Updates
Driver Version Naming Changes
Uninstalling/Modifying NI-USRP
Known Issues
Bug Fixes
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
Legal Information

New Features

NI-USRP 16.0 adds support for LabVIEW 2016 (32- and 64-bit).


NI-USRP 15.5 includes the following new features:


  • Support for NI USRP-2944R and NI USRP-2954R devices

NI-USRP 15.1 adds support for LabVIEW Communications 2.0.


NI-USRP 15.0 adds support for LabVIEW 2015 (32- and 64-bit).


NI-USRP 14.5.1 adds support for several bug fixes.


NI-USRP 14.5 includes the following new features:


  • Support for NI USRP-294x 120 MHz and NI USRP-295x 120 MHz devices

NI-USRP 14.1 includes the following new features:


  • Support for NI USRP-2900 and NI USRP-2901 hardware with LabVIEW Communications System Design software

NI-USRP 14.0 adds support for LabVIEW 2014 (32- and 64-bit).


Supported Hardware

The following hardware products are supported under Windows 10 (32-bit and 64-bit*), Windows 8.1 (32-bit and 64-bit*), and Windows 7 (32-bit and 64-bit*) operating systems.


  • NI USRP-2900†

  • NI USRP-2901†

  • NI USRP-2920

  • NI USRP-2921

  • NI USRP-2922

  • NI USRP-2930

  • NI USRP-2932

  • NI USRP-2940R 40 MHz

  • NI USRP-2940R 120 MHz

  • NI USRP-2942R 40 MHz

  • NI USRP-2942R 120 MHz

  • NI USRP-2943R 40 MHz

  • NI USRP-2943R 120 MHz

  • NI USRP-2944R

  • NI USRP-2950R 40 MHz

  • NI USRP-2950R 120 MHz

  • NI USRP-2952R 40 MHz

  • NI USRP-2952R 120 MHz

  • NI USRP-2953R 40 MHz

  • NI USRP-2953R 120 MHz

  • NI USRP-2954R

  • Ettus Research USRP2**

  • Ettus Research N200**

  • Ettus Research N210**

  • Ettus Research X300**

  • Ettus Research X310**

* These software versions run within the 32-bit emulation layer, Windows on Windows (WOW64), or in a native 64-bit process.


† These devices are supported only in LabVIEW Communications System Design software.


** The NI-USRP instrument driver supports UBX, CBX, CBX-120, WBX, WBX-120, SBX, SBX-120, and XCVR2450 daughterboards. Other daughterboards may also be compatible, but they have not been tested.


Device-specific information about these modules is included in the NI-USRP Help.


System RequirementsSupported Operating Systems

  • Windows 10/8.11/7 SP12 (32-bit and 64-bit)

  • Windows Embedded Standard 7 SP12 (32-bit and 64-bit)

  • Windows Server 2012 R21 (64-bit)

  • Windows Server 2008 R2 SP12 (64-bit)

1 NI software installs VC2015 Runtime and .NET 4.6.1. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.


2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.


Note  NI-USRP 16.0 and later does not support Windows Server non-R2 editions.


NI recommends that you have the most recent service pack for your operating system installed.


Minimum Requirements

  • Processor—1 GHz or faster 32-bit (x86) or 64-bit (x64) processor

  • RAM—1 GB RAM (32-bit) or 2 GB RAM (64-bit)

  • A screen resolution of 1,024 x 768

  • Windows 10/8.1/7, with all available critical updates and service packs

  • Connector—USB 2.0 or higher (USRP-290x), Gigabit Ethernet (USRP-292x/293x/294x/295x), or PCI/MXI Express x4 (USRP-294x/295x)

Application Development Environments (ADEs)

Note  You should install ADEs, such as NI LabVIEW or LabVIEW Communications System Design software, before installing NI-USRP 16.0. To add support for ADEs installed after installing NI-USRP, modify your NI-USRP installation or launch the NI-USRP installer again.


  • NI LabVIEW 2013 SP1, 2014 SP1, 2015 SP1, or 2016

  • LabVIEW Communications System Design Suite 1.0, 1.1, or 2.0

Installed Software, Documentation, and ExamplesInstalled Software

  • <NIDocDir> is an alias for the following National Instruments file folder location: UsersPublicPublic DocumentsNational Instruments

  • <IVIROOTDIR32> is an alias for the following National Instruments file folder location:

    • (32-bit) Program FilesIVI

    • (64-bit) Program Files (x86)IVI

    • (32-bit) Program FilesIVI FoundationIVI

    • (64-bit) Program Files (x86)IVI FoundationIVI

      Note$(IVIROOTDIR32) is configured as an environment variable on the target system.

      		If you upgraded an installation of IVI, your files may be located in the following location:


  • <IVIROOTDIR64> is an alias for the following National Instruments file folder location:

    • (64-bit) Program FilesIVI FoundationIVI

      Note$(IVIROOTDIR64) is configured as an environment variable on the target system.


  • <SystemDir64> is an alias for the following file folder location: (64-bit) Windowssystem32

File Locations

Item
Installed Location
NI-USRP<NIDir32>NI-USRP
NI-USRP Utilities<NIDir32>NI-USRPutilities
NI-USRP Examples<NIDir32>LabVIEW<version>examplesinstr iUSRP
NI-USRP Header files<NIDir32>SharedExternalCompilerSupportCinclude
NI-USRP Import Library files<NIDir32>SharedExternalCompilerSupportClib32msvc
NI-USRP DLL<SystemDir32> iusrp.dll
NI-USRP 2 DLL<SystemDir32> iusrp2.dll
NI UHD DLL<SystemDir32> iuhd.dll
NI UHD 2 DLL<SystemDir32> iuhd2.dll
NI-USRP RIO DLL<SystemDir32> iusrprio.dll
NI-USRP RIO RPC<SystemDir32> iusrpriorpc.exe
NI-USRP USB Monitor<SystemDir32> iusrpmonitor.exe
NI-USRP Firmware and FPGA images<NIDir32>NI-USRPimages


Additional File Locations for Windows (64-bit)

Item
Installed Location
NI-USRP<NIDir64>NI-USRP
NI-USRP Header files<NIDir32>SharedExternalCompilerSupportCinclude
NI-USRP Import Library files<NIDir32>SharedExternalCompilerSupportClib64msvc
NI-USRP DLL<SystemDir64> iusrp.dll
NI-USRP 2 DLL<SystemDir64> iusrp2.dll
NI UHD DLL<SystemDir64> iuhd.dll
NI UHD 2 DLL<SystemDir64> iuhd2.dll
NI-USRP RIO DLL<SystemDir64> iusrprio.dll
NI-USRP Examples (NI LabVIEW 2016 only)<NIDir64>LabVIEW 2016examplesinstr.lib iUSRP


Documentation

Documentation for NI-USRP is located at Start»All Programs»National Instruments»NI-USRP»Documentation. The documentation set is composed of the following documents.


Document
Format
Description
NI-USRP HelpHTML/Windows HelpThe primary document for most NI-USRP products. The help is an HTML version of a traditional user manual that includes the following information:

  • An introduction to NI USRP

  • Hardware device information

  • How to get started with application development

  • A complete reference for all NI-USRP programming functions and VIs

NI USRP-292x Getting Started GuidePrinted and PDFContains software and hardware installation, NI MAX configuration, signal connection, and troubleshooting information for your USRP-292x device.
NI USRP-293x Getting Started GuidePrinted and PDFContains software and hardware installation, NI MAX configuration, signal connection, and troubleshooting information for your USRP-293x device.
NI USRP-294x Getting Started GuidePrinted and PDFContains software and hardware installation, NI MAX configuration, signal connection, and troubleshooting information for your USRP-294x device.
NI USRP-295x Getting Started GuidePrinted and PDFContains software and hardware installation, NI MAX configuration, signal connection, and troubleshooting information for your USRP-295x device.
NI USRP-2900/2901 Getting Started GuidePrinted and PDFContains software and hardware installation, signal connection, and troubleshooting information for your USRP-2900 or USRP-2901 device.
Specifications for your devicePDFLists technical specifications for your device.
NI-USRP 16.0 ReadmeHTML (this document)Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices.


To access the LabVIEW Communications System Design Suite 2.0 Manual, visit ni.com/info and enter the Info Code exudg7. This manual includes the following information:


  • An introduction to LabVIEW Comms

  • Hardware device overviews

  • Information about how to get started with application development

  • A complete programming reference for all NI-USRP nodes

For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.


Note  To view PDFs, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/reader.


Accessing VIs and Functions

NI–USRP palette VIs are available from the Functions»Instrument I/O»Instrument Drivers»NI-USRP palette.


USRP RIO palette VIs are available from the Functions»Instrument I/O»Instrument Drivers»USRP RIO palette.


Finding Examples and Sample Projects

NI-USRP includes several example applications for LabVIEW. These examples serve as interactive tools, programming models, and as building blocks in your own applications. NI-USRP includes examples for getting started and other software-defined radio (SDR) functionality. You can access the NI-USRP examples from the following locations:


  • From the Start menu at Start»All Programs»National Instruments»NI-USRP»Examples.

  • From the LabVIEW Functions palette at Instrument I/O»Instrument Drivers»NI-USRP»Examples.

Note  The NI Example Finder does not include NI-USRP examples.


USRP RIO includes several sample projects for LabVIEW. These sample projects serve as starting points to build a USRP RIO streaming application. To access the LabVIEW sample project from the Create Project dialog, select Sample Projects in the left pane and navigate to the NI-USRP Simple Streaming project.


You can access additional examples from the Code Sharing Community at ni.com/usrp.


NI-USRP 16.0 Drops Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003

With this release, NI-USRP drops support for Microsoft Windows 7 RTM (with no service pack), Windows Vista, Windows XP, and Windows Server 2003. NI-USRP 16.0 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI-USRP 16.0 to an unsupported OS. Additionally, after installing NI-USRP 16.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.


Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.


Driver Version Naming Changes

NI-USRP versions are now aligned with the versions of major NI application software products. This alignment gives you information about the year the driver was released and the most recent software version the driver was designed to work with. Driver versions now start with a two-digit year indicator: <;ProductName><Year-BasedVersion>. For example, NI-USRP 16.0 is the version released with LabVIEW 2016. The last version released under the old numbering scheme is NI-USRP 1.3. The first version released under the new numbering scheme is NI-USRP 14.0.


Uninstalling/Modifying NI-USRP

For Windows 7, complete the following steps:


  • Launch the Control Panel by selecting Start»Control Panel.

  • Double-click Programs and Features.

  • Select National Instruments Software.

  • Click the Uninstall/Change button.

  • Select NI-USRP 16.0 from the dialog box that appears.

  • Click Remove to uninstall the product; click Modify to change the components that are installed.

For Windows 10/8.1, complete the following steps:


  • Right-click on the Start button.

  • Select Control Panel.

  • Select Programs»Programs and Features.

  • Select National Instruments Software.

  • Click the Uninstall button.

  • Select NI-USRP 16.0 from the dialog box that appears.

  • Click Remove to uninstall the product; click Modify to change the components that are installed.

As part of the NI-USRP 16.0 installation, the following software is installed. To completely remove the NI-USRP 16.0 installation from your system, you must also remove all of the following packages:


  • NI-RIO 16.0

  • NI Measurement & Automation Explorer 16.0

Caution  Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.


Note  Do not attempt to uninstall by manually deleting files.


Ethernet Support on USRP-294x/295x Devices

USRP-294x/295x devices support both 1G Ethernet and 10G Ethernet using the connectors on the device back panel. With the default FPGA image, port 0 is designated for 1G, and port 1 is designated for 10G.


Note  The FPGA cannot be modified when the USRP-294x/295x device is connected through Ethernet.


Known Issues

You can access the software and documentation known issues list online. Refer to the NI-USRP 16.0 Known Issues at ni.com/info and enter the Info Code exr6ia for an up-to-date list of known issues in NI-USRP 16.0.


Bug Fixes

There are no changes in NI-USRP 16.0 from NI-USRP 15.5.


The following items are changes in NI-USRP 15.5 from NI-USRP 15.1.


ID
Fixed Issue
544731Fixed an issue that caused Rx/Tx samples to be misaligned by 5 ns when synchronizing using the external PPS on a USRP-294x/295x device.
519793Fixed an issue that caused two channel acquisitions (Rx) on a single USRP-2901 device to fail to align.
486961Fixed an issue that caused the niUSRP Find Devices VI to occasionally return incorrect information when a session is open to a USRP device.
466351Fixed an issue that caused "A stream command was issued in the past" or "Packet had timestamp that was late (or too early)" errors to occur with MIMO synchronization.
There are no changes in NI-USRP 15.1 from NI-USRP 15.0.


The following items are changes in NI-USRP 15.0 from NI-USRP 14.5.1.


ID
Fixed Issue
544473Fixed an issue that caused the niUSRP Configure Frequency Shift VI to incorrectly negate the Tx shift when the scope was "all".
The following items are changes in NI-USRP 14.5.1 from NI-USRP 14.5.


ID
Fixed Issue
546871Fixed an issue that caused the Reference Clock PLL in the FPGA to fail to lock to the internal source.
545660Fixed an issue that caused the signal to degrade after you install NI-USRP 14.5.
The following items are changes in NI-USRP 14.5 from NI-USRP 14.1.


ID
Fixed Issue
528168Fixed an issue that caused channels to fail to align during a two-channel Rx using the USRP-2900 or USRP-2901.
506448Fixed an issue that caused multiple Rx channels to fail to align when you use USRP RIO and NI-USRP VIs.
494912Fixed an issue that caused NI-USRP not to accept RIO aliases for USRP devices that use PCI Express.
492685Fixed an issue that caused the niUSRP Open Rx Session VI to take a long time to execute after you run the niUSRP Open Tx Session VI followed by the niUSRP Configure Signal VI.
492219Fixed an issue that caused a Tx underflow error when you start Rx after Tx.
489197Fixed an issue that caused an LO locking error on channel 1 when you query an attribute from the NI-USRP driver before you configure any parameters.
470359Fixed an issue that caused bad or empty GPS NMEA strings to return when queries are made in a random wait iterative fashion.
456805Fixed an issue that caused the niUSRP Get Time VI to return a value of 1 instead of 0 in the fractional seconds output.
311843Fixed an issue that caused the USRP-2920 and USRP-2921 devices to coerce the carrier frequency incorrectly.
The following items are changes in NI-USRP 14.1 from NI-USRP 14.0.


ID
Fixed Issue
510807Fixed an issue that caused NI-USRP to hang if an empty array was passed to the niUSRP Write Tx Data (poly) VI.
489197Fixed an issue that caused a LO locking error to occur on channel one on your USRP-294x/295x devices.
The following items are changes in NI-USRP 14.0 from NI-USRP 1.3.


ID
Fixed Issue
488044Fixed an issue that caused clocks derived from the Data Clock to result in invalid data due to the Data Clock changing rate. Refer to KB 6OBBPOR4 on ni.com.
484898Fixed an issue that caused incorrect reference level settings when you configure the Rx reference level on USRP-294x/295x devices.
465859Fixed an issue that caused errors when you configure two sessions in LabVIEW to the same device in parallel fashion.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.


If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.


For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:


  • For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.

  • For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.

  • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.


Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.


Using NI Software with Microsoft Windows 8.1

When you install National Instruments software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.


Legal Information

Copyright


© 2011–2016 National Instruments. All rights reserved.


Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.


National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.


End-User License Agreements and Third-Party Legal Notices


You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:


  • Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

  • EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

  • Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

U.S. Government Restricted Rights


If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.


IVI Foundation Copyright Notice


Content from the IVI specifications reproduced with permission from the IVI Foundation.


The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.


Trademarks


Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.


Patents


For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.


374760H-01


首页
84162741QQ
联系