Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活,以下链接可下载:
NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI-USRP 15.5 Driver Win32/64Eng NI通用软件无线电外设仪器驱动程序15.5下载
NI USRP
NI-USRP支持使用NI通用软件无线电外设(USRP)收发仪和LabVIEW可重配置I/O (RIO) USRP设备的客户。
NI-USRP是一个NI仪器驱动程序,可同时支持软件无线电(SDR)设备和可重配置SDR设备。如果要配置设备,可使用NI-USRP仪器驱动程序中包含的NI-USRP API或USRP RIO仪器设计库(IDL)。NI-USRP可帮助您使用NI SDR硬件创建发射(Tx)和接收(Rx)应用。
15.5
文件大小: 1755706672 字节 (1.64 GB)
修改日期: 2019-06-25 02:58
MD5: 5114766ffd9250cf767e0c45833074af(官方正确)
SHA1: 0a10fdbafd8b16e5599471c16c8131c2d85c2a53
SHA256: 9e4e0bb5d89dcc7f7d8bb85545f46f3126820e7ad5c4e611611f078bc1323fba
CRC32: fb4be06f
百度网盘和NI官方下载地址:
NI-USRP 15.5 Driver Win32/64Eng NI通用软件无线电外设仪器驱动程序15.5下载
http://pcmv.cn/thread-25628-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI-USRP 15.5 Readme
New Features
Support for NI USRP-2944R and NI USRP-2954R devices
Support for NI USRP-294x 120 MHz and NI USRP-295x 120 MHz devices
Support for NI USRP-2900 and NI USRP-2901 hardware with LabVIEW Communications System Design software
Supported Hardware
NI USRP-2900†
NI USRP-2901†
NI USRP-2920
NI USRP-2921
NI USRP-2922
NI USRP-2930
NI USRP-2932
NI USRP-2940R 40 MHz
NI USRP-2940R 120 MHz
NI USRP-2942R 40 MHz
NI USRP-2942R 120 MHz
NI USRP-2943R 40 MHz
NI USRP-2943R 120 MHz
NI USRP-2944R
NI USRP-2950R 40 MHz
NI USRP-2950R 120 MHz
NI USRP-2952R 40 MHz
NI USRP-2952R 120 MHz
NI USRP-2953R 40 MHz
NI USRP-2953R 120 MHz
NI USRP-2954R
Ettus Research USRP2**
Ettus Research N200**
Ettus Research N210**
Ettus Research X300**
Ettus Research X310**
System RequirementsSupported Operating Systems
Windows 10 (32-bit and 64-bit)
Windows 8.1 (32-bit and 64-bit)
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 3 (32-bit)
Minimum System Requirements
Processor—Pentium 4 or equivalent
RAM—2 GB
Microsoft Internet Explorer 5.5 or later
A screen resolution of 1,024 x 768 with 256 colors
Windows 10/8.1/7/Vista/XP SP3, with all available critical updates and service packs
Device | Minimum System Requirements |
NI USRP-290x | USB 2.0 or higher |
NI USRP-292x/293x | Gigabit Ethernet |
NI USRP-294x/295x | PCI/MXI Express x4 or Gigabit Ethernet |
Recommended System
Processor—Intel i7 or equivalent
RAM—4 GB
A screen resolution of 1,024 x 768
Windows 10/8.1/7, with all available critical updates and service packs
Device | Recommend System |
NI USRP-290x | USB 3.0 or higher |
NI USRP-292x/293x | Gigabit Ethernet |
NI USRP-294x/295x | PCI/MXI Express x4 or Gigabit Ethernet |
Application Development Environments (ADEs)
NI LabVIEW 2012, 2013, 2014, or 2015
LabVIEW Communications System Design Suite 2.0
Installed Software, Documentation, and ExamplesInstalled Software
<NIDir32> is an alias for the following National Instruments file folder location:
Windows 10 (32-bit)/8.1 (32-bit)/7 (32-bit)/Vista (32-bit)/Windows XP: Program FilesNational Instruments
Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit)/Vista (64-bit): Program Files (x86)National Instruments
<SystemDir32> is an alias for the following file folder location:
Windows 10 (32-bit)/8.1 (32-bit)/7 (32-bit)/Vista (32-bit)/Windows XP: WindowsSystem32
Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit)/Vista (64-bit): Windowssyswow64
<NIDir64> is an alias for the following National Instruments file folder location:
Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit)/Vista (64-bit): Program FilesNational Instruments
<SystemDir64> is an alias for the following file folder location:
Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit)/Vista (64-bit): Windowssystem32
File Locations
Item | Installed Location |
NI-USRP | <NIDir32>NI-USRP |
NI-USRP Utilities | <NIDir32>NI-USRPutilities |
NI-USRP Examples | <NIDir32>LabVIEW<version>examplesinstr iUSRP |
NI-USRP Header files | <NIDir32>SharedExternalCompilerSupportCinclude |
NI-USRP Import Library files | <NIDir32>SharedExternalCompilerSupportClib32msvc |
NI-USRP DLL | <SystemDir32> iusrp.dll |
NI-USRP 2 DLL | <SystemDir32> iusrp2.dll |
NI UHD DLL | <SystemDir32> iuhd.dll |
NI UHD 2 DLL | <SystemDir32> iuhd2.dll |
NI-USRP RIO DLL | <SystemDir32> iusrprio.dll |
NI-USRP RIO RPC | <SystemDir32> iusrpriorpc.exe |
NI-USRP USB Monitor | <SystemDir32> iusrpmonitor.exe |
NI-USRP Firmware and FPGA images | <NIDir32>NI-USRPimages |
Additional File Locations for Windows (64-bit)
Item | Installed Location |
NI-USRP | <NIDir64>NI-USRP |
NI-USRP Header files | <NIDir32>SharedExternalCompilerSupportCinclude |
NI-USRP Import Library files | <NIDir32>SharedExternalCompilerSupportClib64msvc |
NI-USRP DLL | <SystemDir64> iusrp.dll |
NI-USRP 2 DLL | <SystemDir64> iusrp2.dll |
NI UHD DLL | <SystemDir64> iuhd.dll |
NI UHD 2 DLL | <SystemDir64> iuhd2.dll |
NI-USRP RIO DLL | <SystemDir64> iusrprio.dll |
NI-USRP Examples (NI LabVIEW 2015 only) | <NIDir64>LabVIEW 2015examplesinstr iUSRP |
Documentation
Document | Format | Description |
NI-USRP Help | HTML/Windows Help | The primary document for most NI-USRP products. The help is an HTML version of a traditional user manual that includes the following information:
|
NI USRP-292x Getting Started Guide | Printed and PDF | Contains software and hardware installation, NI MAX configuration, signal connection, and troubleshooting information for your USRP-292x device. |
NI USRP-293x Getting Started Guide | Printed and PDF | Contains software and hardware installation, NI MAX configuration, signal connection, and troubleshooting information for your USRP-293x device. |
NI USRP-294x Getting Started Guide | Printed and PDF | Contains software and hardware installation, NI MAX configuration, signal connection, and troubleshooting information for your USRP-294x device. |
NI USRP-295x Getting Started Guide | Printed and PDF | Contains software and hardware installation, NI MAX configuration, signal connection, and troubleshooting information for your USRP-295x device. |
NI USRP-2900/2901 Getting Started Guide | Printed and PDF | Contains software and hardware installation, signal connection, and troubleshooting information for your USRP-2900 or USRP-2901 device. |
Specifications for your device | Lists technical specifications for your device. | |
NI-USRP 15.5 Readme | HTML (this document) | Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices. |
An introduction to LabVIEW Comms
Hardware device overviews
Information about how to get started with application development
A complete programming reference for all NI-USRP nodes
Accessing VIs and Functions
Finding Examples and Sample Projects
From the Start menu at Start»All Programs»National Instruments»NI-USRP»Examples.
From the LabVIEW Functions palette at Instrument I/O»Instrument Drivers»NI-USRP»Examples.
Product Security and Critical Updates
Driver Version Naming Changes
Uninstalling/Modifying NI-USRP
Launch the Control Panel by selecting Start»Control Panel.
Double-click Add or Remove Programs.
Select National Instruments Software.
Click Change/Remove.
Select NI-USRP 15.5 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
Launch the Control Panel by selecting Start»Control Panel.
Double-click Programs and Features.
Select National Instruments Software.
Click the Uninstall/Change button.
Select NI-USRP 15.5 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
Right-click on the Start button.
Select Control Panel.
Select Programs»Programs and Features.
Select National Instruments Software.
Click the Uninstall button.
Select NI-USRP 15.5 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
NI-RIO 15.1
NI Measurement & Automation Explorer 15.0
Ethernet Support on USRP-294x/295x Devices
Known Issues
Bug Fixes
ID | Fixed Issue |
544731 | Fixed an issue that caused Rx/Tx samples to be misaligned by 5 ns when synchronizing using the external PPS on an USRP-294x/295x device. |
519793 | Fixed an issue that caused two channel acquisitions (Rx) on a single USRP-2901 device to fail to align. |
486961 | Fixed an issue that caused the niUSRP Find Devices VI to occasionally return incorrect information when a session is open to a USRP device. |
466351 | Fixed an issue that caused "A stream command was issued in the past" or "Packet had timestamp that was late (or too early)" errors to occur with MIMO synchronization. |
ID | Fixed Issue |
544473 | Fixed an issue that caused the niUSRP Configure Frequency Shift VI to incorrectly negate the Tx shift when the scope was "all". |
ID | Fixed Issue |
546871 | Fixed an issue that caused the Reference Clock PLL in the FPGA to fail to lock to the internal source. |
545660 | Fixed an issue that caused the signal to degrade after you install NI-USRP 14.5. |
ID | Fixed Issue |
528168 | Fixed an issue that caused channels to fail to align during a two-channel Rx using the USRP-2900 or USRP-2901. |
506448 | Fixed an issue that caused multiple Rx channels to fail to align when you use USRP RIO and NI-USRP VIs. |
494912 | Fixed an issue that caused NI-USRP not to accept RIO aliases for USRP devices that use PCI Express. |
492685 | Fixed an issue that caused the niUSRP Open Rx Session VI to take a long time to execute after you run the niUSRP Open Tx Session VI followed by the niUSRP Configure Signal VI. |
492219 | Fixed an issue that caused a Tx underflow error when you start Rx after Tx. |
489197 | Fixed an issue that caused an LO locking error on channel 1 when you query an attribute from the NI-USRP driver before you configure any parameters. |
470359 | Fixed an issue that caused bad or empty GPS NMEA strings to return when queries are made in a random wait iterative fashion. |
456805 | Fixed an issue that caused the niUSRP Get Time VI to return a value of 1 instead of 0 in the fractional seconds output. |
311843 | Fixed an issue that caused the USRP-2920 and USRP-2921 devices to coerce the carrier frequency incorrectly. |
ID | Fixed Issue |
510807 | Fixed an issue that caused NI-USRP to hang if an empty array was passed to the niUSRP Write Tx Data (poly) VI. |
489197 | Fixed an issue that caused a LO locking error to occur on channel one on your USRP-294x/295x devices. |
ID | Fixed Issue |
488044 | Fixed an issue that caused clocks derived from the Data Clock to result in invalid data due to the Data Clock changing rate. Refer to KB 6OBBPOR4 on ni.com. |
484898 | Fixed an issue that caused incorrect reference level settings when you configure the Rx reference level on USRP-294x/295x devices. |
465859 | Fixed an issue that caused errors when you configure two sessions in LabVIEW to the same device in parallel fashion. |
Automating the Installation of NI Products
For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
NI-USRP Extends Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003
Product | Info Code |
NI LabVIEW | lifecycle |
NI LabWindows™/CVI™ | cvi_lifecycle |
NI Measurement Studio | mstudiolifecycle |
NI TestStand | tslcp |
NI DIAdem | ddlcp |
NI SignalExpress | selcp |
NI VeriStand | nivslifecycle |
Legal Information
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.