Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
LabVIEW 2012 Electrical Power Suite Win32Eng LV2012电力套件EPS2012电力工具包
文件大小: 67544200 字节 (64.42 MB)
修改日期: 2014-08-06 17:52
MD5: a90dc298817a2f73abb97d9459566650（官方正确）
SHA1: d7955545a1d2639220824040b6e702d9f5799c95
SHA256: 7aa2f6500c2c364865acfb06bbd9e4cd53326638967137e710bf8d990705ab98
CRC32: a41acfbc
LabVIEW电力工具包可帮助您开发应用程序来测量、分析、 监控和记录电力数据和现象。
LabVIEW电力工具包是LabVIEW的一个附加软件，可帮助您自行开发单相或三相电力监控、计量或质量分析应用程序。LabVIEW电力工具包包含了功率测量和电能质量VI，可用于测量电力和质量参数以及在CompactRIO、CompactDAQ和PXI平台上执行谐波分析。该工具包还提供了同步相量测量VI以及保护VI（用于保护CompactRIO平台上的设备）。
2016版本之前的电力模块叫Electrical Power Suite，简称EPS，2017之后的版本叫Electrical Power Toolkit，简称ETP。
百度网盘下载地址（限速，请开会员或使用破解限速工具）：
链接:请注册视觉论坛用户，登陆后购买附件下载查看，充值请联系在线客服 提取码: 请注册登陆视觉论坛会员，购买附件查看
NI官方下载地址（可能无效或无法下载完成）：
下载地址1：
请注册登陆视觉论坛会员，购买附件查看
下载地址2：
请注册登陆视觉论坛会员，购买附件查看
LabVIEW 2012 Electrical Power Suite LV2012电力套件EPS2012电力工具包
http://pcmv.cn/thread-24239-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
LabVIEW 2012 Electrical Power Suite Readme
Version 12.0.0
June 2012
This file contains important information about the LabVIEW 2012 Electrical Power Suite, including system requirements, installation instructions, and known issues.
Overview
System Requirements
Installation Instructions
Known Issues
Accessing the Help
Finding Examples
Automating the Installation of NI Products
Overview
The LabVIEW Electrical Power Suite provides VIs that you can use to create applications on the NI CompactRIO platform to measure, analyze, monitor, and record electrical power data and phenomena. You can use the Electrical Power VIs to measure voltage, current, and frequency, measure power and energy values, analyze voltage and current events, aggregate and log data, and perform synchrophasor measurement.
The Electrical Power Suite complies with the following standards:
IEC 61000-4-7:2002, Electromagnetic Compatibility (EMC) - Part 4-7: Testing and Measurement Techniques - General Guide on Harmonics and Interharmonics Measurements and Instrumentation, for Power Supply Systems and Equipment Connected Thereto
IEC 61000-4-15:2010, Electromagnetic Compatibility (EMC) - Part 4-15: Testing and Measurement Techniques - Flickermeter - Functional and Design Specifications
IEC 61000-4-30:2008, Electromagnetic Compatibility (EMC) - Part 4-30: Testing and Measurement Techniques - Power Quality Measurement Methods
IEEE Std C37.111:1999, IEEE Standard Common Format for Transient Data Exchange (COMTRADE) for Power Systems
IEEE Std C37.118:2005, Synchrophasors for Power Systems
EN 50160:2007, Voltage Characteristics of Electricity Supplied by Public Distribution Networks
System Requirements
In addition to the system requirements for the LabVIEW Development System, the Electrical Power Suite has the following requirements:
LabVIEW 2012 Full or Professional Development System (32-bit)
LabVIEW 2012 FPGA Module
LabVIEW 2012 Real-Time Module
NI-RIO 12.0
At least 200 MB of disk space
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW 2012.
Installation Instructions
Double-click the setup.exe file in the root directory of the Electrical Power Suite installer and follow the instructions on the screen to install the Electrical Power Suite.
Known Issues
You can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in the Electrical Power Suite.
Accessing the Help
Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about the Electrical Power Suite.
Finding Examples
Select Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for the Electrical Power Suite are located in the labviewexamplesElectrical Power directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information, refer to the following KnowledgeBase articles:
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Important Information
Copyright
© 2012 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
Trademarks
LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.
Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
