Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
LabVIEW 2009SP1 Real-Time Module LV2009SP1实时模块RealTime2009SP1 Win32Eng 32位Windows英文版下载
LabVIEW Real-Time模块可帮助您创建在嵌入式硬件设备上执行的可靠、独立的应用程序。
LabVIEW Real-Time模块是LabVIEW编程环境的一个附加软件，可用于创建和部署用于测试、监测和控制的实时分布式系统应用程序。您可以利用实时操作系统来确保独立系统的可靠性和精确定时。数百个事先编写好的LabVIEW库和硬件API还可以帮助您节省宝贵的开发时间以及实现确定性数据采集。
LabVIEW Real-Time模块为创建可靠独立的嵌入式系统提供了基于图形化编程方法的完整解决方案。 作为LabVIEW开发平台的附加模块，LabVIEW Real-Time模块有助开发和调试图形化应用程序，并将这些程序下载到嵌入式硬件设备（如：CompactRIO、Single-Board RIO、PXI、视觉系统，乃至第三方PC）上执行。
使用LabVIEW Real-Time模块的三大理由:
1. 将LabVIEW图形化编程扩展至独立的嵌入式系统
LabVIEW Real-Time包含了用于多线程和实时线程调度的内置结构，以帮助您高效地编写稳定、确定的代码。 您可对独立式系统进行图形化编程，使其更长时间地可靠运行。
2. 利用实时操作系统实现精确的定时和高可靠性
通用操作系统并不适用于需要严格定时的重要应用。 LabVIEW Real-Time可支持运行NI Linux Real-Time、VxWorks或Phar Lap ETS实时操作系统(RTOS)的NI嵌入式硬件。
3. 利用各类IP和实时硬件驱动
您可使用数百个预编写的LabVIEW函数库，比如PID控制和FFT，并用于独立式系统。 NI还提供了大量实时硬件驱动程序和LabVIEW API，适用于大多数NI I/O模块，以实现确定的数据采集。
百度云盘下载地址（限速，请开会员或使用破解限速工具）：
链接: 请注册视觉论坛用户，登陆后购买附件下载查看，充值请联系在线客服 提取码: 请注册登陆视觉论坛会员，购买附件查看
NI官方下载地址（可能无效或无法下载完成）：
请注册登陆视觉论坛会员，购买附件查看
LabVIEW 2009SP1 Real-Time Module LV2009SP1实时模块RealTime2009SP1 Win32Eng 32位Windows英文版下载
http://pcmv.cn/thread-24187-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
LabVIEW 2009 SP1 Real-Time Module Readme
Version 9.0.1
December 2009
This file contains important information about the LabVIEW 2009 Real-Time Module.
Supported Platforms
Installation
Licensing
Real-Time Operating System Versions
Upgrade and Compatibility Issues
Known Issues
Bug Fixes
Supported Platforms
The Real-Time Module supports the following operating systems for application development:
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP
Windows 2000
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
Note The Real-Time Module does not support Windows NT/Me/9x. The Real-Time Module also does not support the Windows Server non-R2 editions.
Installation
You can install all of your LabVIEW products—including the LabVIEW Real-Time Module—using the LabVIEW 2009 Platform DVDs. You can find installation instructions for the Real-Time Module along with activation instructions in the following locations:
LabVIEW Real-Time Module Release and Upgrade Notes, which are available in your LabVIEW Real-Time Module software kit or online at ni.com/manuals.
LabVIEW Release Notes, which are available in your LabVIEW software kit.
LabVIEW 2009 Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.
To request additional LabVIEW 2009 Platform DVDs, refer to the National Instruments Web site.
You must install LabVIEW 2009 before you install the LabVIEW Real-Time Module 2009.
Refer to the LabVIEW Real-Time Module Release and Upgrade Notes for more information about upgrade and compatibility issues, a list of new features, and installation instructions. The LabVIEW Real-Time Module Release and Upgrade Notes is included as a printed booklet with the kit. You also can access the LabVIEW Real-Time Module Release and Upgrade Notes by selecting Help»Search the LabVIEW Help in LabVIEW and navigating to the Real-Time Module»Real-Time Module Related Documentation topic on the Contents tab.
Installing and Configuring Japanese Language Support
After you install the LabVIEW Real-Time Module 2009 on your development computer, you can complete the following steps to install and configure Japanese language support on an RT target.
Use the LabVIEW Real-Time Software Wizard in NI Measurement & Automation Explorer to install the Language Support for Japanese software component on the RT target. Refer to the NI Measurement & Automation Explorer Help for information about the LabVIEW Real-Time Software Wizard.
Open the System Settings tab and select Japanese as the Locale.
Installing Language Support for Japanese does not enable Japanese language support within the RT target file system. You cannot use Japanese characters in directory names or file names on the RT target.
Licensing
The LabVIEW Real-Time Module relies on licensing activation. You must activate a valid LabVIEW Real-Time Module license before you can run the LabVIEW Real-Time Module. To activate the LabVIEW Real-Time Module, use the serial number you received as part of your installation package.
Refer to the Activation Instructions for National Instruments Software for more information about licensing activation.
Real-Time Operating System Versions
The Real-Time Module 2009 installs the following RT target operating systems. Refer to the specific RT target hardware documentation for information about which real-time operating system your RT target uses.
Supported Real-Time Operating System Features
The Real-Time Module supports only a subset of the features that the ETS and VxWorks operating systems support. Refer to the Real-Time Module book on the Contents tab in the LabVIEW Help for information about features that the Real-Time Module supports.
Upgrade and Compatibility Issues
Refer to the LabVIEW Real-Time Module Release and Upgrade Notes for information about upgrade and compatibility issues. The LabVIEW Real-Time Module Release and Upgrade Notes is included as a printed booklet with the kit. You also can access the LabVIEW Real-Time Module Release and Upgrade Notes by selecting Help»Search the LabVIEW Help in LabVIEW and navigating to the Real-Time Module»Real-Time Module Related Documentation topic on the Contents tab.
Known Issues
This section includes information about known issues for the LabVIEW 2009 SP1 Real-Time Module.
Windows 7 Issues
National Instruments is committed to maintaining compatibility with Microsoft Windows technology changes. However, NI has become aware of a number of issues of potential significance regarding Microsoft Windows 7. To learn how Windows 7 affects your use of NI products, visit ni.com/info and enter the Info Code windows7.
MathScript Probe Support
The LabVIEW 2009 SP1 MathScript RT Module adds support for the Variables page of the MathScript probe on RT targets. However, the Real-Time Module Help still indicates that MathScript probes are not supported on RT targets.
You can access the complete software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the LabVIEW 2009 Real-Time Module.
Bug Fixes
The following items are the IDs and titles of a subset of issues fixed in the RT Module 2009 SP1.
| ID | Fixed Issue |
| 194232 | Over 20 probes in debuggable RT VI causes target to disconnect |
| 193917 | VxWorks semTake sometimes returns OK when semaphore was not obtained |
| 193434 | RT Wait Until Next Multiple Timer Cannot be Saved to a Previous Version of LabVIEW |
| 191558 | Deployment progress of a RT host VI fails to a cRIO target in LV 2009 |
| 191108 | Source Distribution Fails to Build - Can't Find File in Vilib |
| 186326 | Error downloading RT host code after upgrading to LV 2009 |
| 184584 | FFT returns inconsistent data on VxWorks when large number of files are being transfered via FTP |
The following items are the IDs and titles of a subset of issues fixed in the RT Module 2009.
| ID | Fixed Issue |
| 167785 | Type cast from Fixed Point to U32 does not work properly on VXworks controllers |
| 162882 | Need a configurable INI token for UDP large packet fragmentation |
| 158842 | TDMS greyed out for Write To Measurement Express VI |
| 158524 | Unable to bind a control to function block variables |
| 153981 | Flush file cache to disk failure when writing to USB on SMP targets |
| 152321 | Possible reason not clear for Error 18 |
| 152049 | Time-Triggered Shared Variables transfer size limitation is small |
| 143813 | Streaming data to USB thumb drive in LV RT 8.6 crashes PXI controller |
| 142076 | Fix race conditions involving ni::dsc::osdep::Thread |
| 141130 | Comparing I64s in Real-Time on a VXWorks controller gives incorrect result |
| 138886 | Front panel binding does not release memory on RT target |
| 137523 | IOV Forcing VIs are marked re-entrant but do not execute as such |
| 135766 | (ETS) String to IP function error |
| 135543 | Run when opened not honored for reentrant remote panel |
| 135415 | PXI-8106 with SMP shows clock drift compared to Windows & NIST server |
| 134264 | Setting local time on ETS RT target does not return expected time |
| 132405 | TDMS Write to Measurement File does not work on RT PXI targets |
| 130811 | Set Target Image VI in System Replication fails to FTP PHARBOOT.SYS |
| 129702 | PC Eval should print HDD information |
| 128038 | Chipset on Vostro 410 tower fails to recognize SATA HDDs |
| 127463 | TDMS Open File gives error 6 on VxWorks targets |
| 125993 | Quad Core Crash - ThEvent.cpp(211) on LV RT 8.6 |
| 104678 | Remove "SASASASASASASA" printout from multicore code |
| 104016 | PC Eval should not show "No PCI support available." as catch all for PCI BIOS check |
| 96813 | Libraries contain illegal characters that cause build to fail |
| 91776 | Summer/winter time on FP controllers |
| 53747 | RT Project Wizard "generates" bad HTML file |
Important Information
Copyright
© 2009 National Instruments Corporation. All rights reserved.
For copyright notices, conditions, and disclaimers, including information regarding certain third-party components used in the NI Real-Time Hypervisor, refer to the Copyright topic of the LabVIEW Help.
Trademarks
National Instruments, NI, ni.com, LabVIEW, and LabVIEW Real-Time Module are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
Patents
For patents covering the National Instruments products, refer to ni.com/patents.
