下载中心

NI Vision Acquisition Software 2025 Q1 Win11 32/64bitEng 视觉采集软件VAS25.0.0版 适用LabVIEW2025Q1/VDM2025Q1

视觉采集软件属于驱动程序软件，用于采集、显示和保存各类相机的图像。NI视觉采集软件(VAS)使您能够采集、显示和保存各种行业标准相机（包括Gige Vision、USB3 Vision和Camera Link）的图像。您还可以使用此软件轻松地控制NI视觉硬件上的数字I/O。借助一套易于使用的函数和示例程序，您可以使用LabVIEW和C/C ++快速创建应用程序。VAS视觉采集软件不同于VA视觉助手（Vision Assistant），视觉助手是VDM视觉开发包中的辅助工具，没有单独的安装包，安装VDM时可选择视觉助手安装。

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

视觉采集软件2025 Q1
发布日期：2025-1-23
包含的版本：2025 Q1完整版，版本号25.0.0
受支持的操作系统：
Windows 11
Windows Server 2022 64-bit
Windows 10 64-bit
Windows Server 2019 64-bit
语言：英文
应用程序位数：32/64位
校验和：
文件大小: 2250977280 字节 (2.10 GB)
修改日期: 2025-02-11 09:37
MD5: 4713ae34f9736409c5c40cb9a7ebc34f
SHA1: 65434c5f888d331603ee662fa3435aa5bac818eb
SHA256: 5b03b5a2b0d986362624f6ba08f7a3e94da35dfd784608423410d515206ed903
CRC32: 62e605e9

百度网盘与NI官方下载地址：
请注册登陆视觉论坛账号，购买附件查看下载地址

NI Vision Acquisition Software 2025 Q1 Win11 32/64bitEng 视觉采集软件VAS25.0.0版 适用LabVIEW2025Q1/VDM2025Q1

http://visionbbs.com/thread-33295-1-1.html

(出处: 石鑫华视觉论坛)

没有什么实质更新，也许只是增减了一些NI官方的硬件支持。新版仅升级对LabVIEW 2025 Q1的支持，实际上VAS在2023Q1时就已经使用LVaddon目录，经验证，VAS2023Q1也是支持LabVIEW2025Q1版本的，并不一定需要更新VAS2025Q1。

VAS2025安装视频教程：


VAS2025Q1未更新发行说明文件，参考VAS2023Q1版本：

Vision Acquisition Software 2023 Q1 Readme

January 2023

This file contains installation instructions and compatibility information for Vision Acquisition Software 2023 Q1.

You can find more release information on ni.com.

• Vision Acquisition Software Release Notes: Known issues, bugs fixed since the last release, and other notes about this release

• Vision Acquisition Software Documentation: New features, behavior changes, and other documentation
  

Overview

System Requirements

Supported Operating Systems

Application Software Support

Vision Standards Support

Installation Instructions

Configuring NI-IMAQ

Configuring NI-IMAQdx

Product Security and Critical Updates

New Features

Accessing the Documentation and Examples

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 11

Using NI Software with Microsoft Windows 10

Unsupported Windows Operating Systems

Legal Information

Overview

Vision Acquisition Software (VAS) allows you to acquire, display, and save images; control digital I/O on NI image acquisition devices; and configure your driver software and hardware.

For information about licensing NI Vision software, visit ni.com/info and enter the Info Code LicenseVision. Refer to the NI Vision website at ni.com/vision for the latest information about Vision Acquisition Software.

Vision Acquisition Software includes the following drivers:

• NI-IMAQ is driver software for Camera Link cameras.

• NI-IMAQdx is driver software for the following device types:
  

• PCIe-1427

• PCIe-1433

• PCIe-1437

• PXIe-1435
  

• Camera Link cameras in Windows using supported frame grabbers:
  

• ISC-178x smart cameras

• GigE Vision-compliant cameras

• USB3 Vision-compliant cameras

• DirectShow-compatible cameras (Windows), UVC-compliant webcams (Linux RT)
  

• NI-IMAQ I/O Driver Software that helps you program reconfigurable frame grabbers with LabVIEW FPGA and helps you program DIO without LabVIEW FPGA for Compact Vision Systems, Industrial Controllers, and other PCIe-based devices using the Vision RIO API.
  

• CVS-1458

• CVS-1458RT

• CVS-1459

• CVS-1459RT

• IC-3120

• IC-3121

• IC-3171

• IC-3172

• IC-3173

• PCIe-8237

• PXIe-8246
  

• PCIe-1473

• PCIe-1477

• NI 1483 FlexRIO Adapter Module
  

• Reconfigurable Frame Grabbers (requires LabVIEW FPGA):
  

• Devices supporting the Vision RIO API:
  

• Note  LabVIEW FPGA can optionally be used to reconfigure the FPGA on Vision RIO devices, but only DIO functions are available for external connections.
  

• Note  New versions of Vision Acquisition Software no longer support the following hardware:
  

• NI 17xx and NI 177x Smart Cameras

• NI EVS-1463, -1463RT, -1464, and -1464RT Embedded Vision Systems

• NI CVS-1454, -1455, -1456, and -1457RT Compact Vision Systems

• Analog cameras

• Parallel digital cameras

• Basler and Axis IP cameras
  

• Note  New versions of Vision Acquisition Software no longer support the following real-time operating systems:
  
  

• VxWorks

• Phar Lap ETS
  

Additional Driver Software Requirements

Some hardware requires driver software in addition to Vision Acquisition Software drivers. Refer to the NI website at ni.com/drivers for information about these drivers.

• The NI PCIe-1473R and NI PCIe-1473R-LX110 require NI FlexRIO software to access the DRAM resources in a LabVIEW FPGA project.

• The NI 1483 FlexRIO Adapter Module requires NI FlexRIO software.

• The IC-312x and IC-317x industrial controllers require NI Industrial Controller Device Drivers to access FPGA resources and to discover remote real-time targets in NI Meaurement & Automation Explorer (MAX).
  

System Requirements

Vision Acquisition Software 2023 Q1 has the following requirements:

• 1 GHz or faster 64-bit (x64) processor

• A screen resolution of 1,024 x 768

• At least 512 MB of memory
  

Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW.

Supported Operating Systems

Vision Acquisition Software 2023 Q1 supports the following operating systems:

• Windows 11

• Windows 10

• Windows Server 2022

• Windows Server 2019

• Windows Server 2016
  

Note  Vision Acquisition Software no longer supports any 32-bit Windows operating system. Refer to Unsupported Windows Operating Systems for more information about support for Microsoft Windows OSes.

Application Software Support

Vision Acquisition Software 2023 Q1 supports the following application software versions, including service packs.

Note  The following table lists the NI application software versions, including service packs, supported by Vision Acquisition Software. The installer specifically allows side-by-side installations of Vision Acquisition Software for each of the supported versions of LabVIEW, enabling you to use Vision Acquisition Software with multiple versions of LabVIEW. NI recommends that you install LabVIEW, LabVIEW Real-Time, and any other supported development environment before installing Vision Acquisition Software.

1 NI-IMAQ I/O is not supported in NI LabWindows™/CVI™.

Vision Acquisition Software .NET Support

Development and runtime support for .NET driver features are no longer included as of Vision Acquisition Software 19.0 and later. Refer to GitHub page NI IMAQdx for .NET for more information about open-source versions of NI-IMAQdx.

Vision Standards Support

The following table lists the machine vision and imaging standards supported by Vision Acquisition Software.

Installation Instructions

Download the Vision Acquisition Software installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Documentation for more information about installing, removing, and upgrading NI software using Package Manager.

After installing your software, you will need to activate it. Activating your software verifies the licenses associated with your NI account, so you can start using your software. You have different options for activation, based on your software and how it was purchased. Please visit ni.com/activate for more information on activation methods.

If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.

If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation method of the Suite or Bundle.

Updated LabVIEW Compatibility Policy

The "Vision Acquisition Software Support for LabVIEW" package supports applications using Vision Acquisition Software with LabVIEW minimum supported version or later. When installing Vision Acquisition Software, this package will be recommended if you have already installed LabVIEW minimum supported version or later and installs to the LVAddons directory.

LVAddons directory location: C:Program FilesNILVAddons

Configuring NI-IMAQ

Complete the following steps to install an image acquisition device and configure NI-IMAQ.

Note: You must install NI-IMAQ before installing your image acquisition device.

Caution: Power off and unplug the computer before installing your hardware. Wait for any motherboard LEDs to power off before proceeding, since some computers remain powered for some time after being unplugged.

• Install your image acquisition device, and connect the camera. Refer to the device documentation for specific hardware installation instructions.

• Run NI MAX.
  

• Double-click the NI MAX icon on the desktop. You can use NI MAX to modify camera properties. Once you have saved these properties, they become the default settings for all NI-IMAQ applications.

• Expand Devices and Interfaces to display a list of the image acquisition devices installed on your computer.
  

• Select a camera file, and acquire an image.
  
  

• Use the Snap button to acquire and display a single image with the image acquisition device.

• Use the Grab button to acquire images continuously. A grab allows you to focus the camera.
  

• Click the plus sign next to the image acquisition device to expand the menu tree and list the available channels or ports. Right-click the channel or port to display a list of available cameras.

• Select the appropriate camera type from the list. Camera type selection varies according to the image acquisition device installed.

• To change the camera settings, modify the parameters at the bottom of the image viewer panel.

• You can acquire an image in the following ways:
  
  

Tip: For a complete list of supported cameras, right-click the channel or port, select Camera, and click Search ni.com.

Note: Refer to the right side of the MAX user interface, which displays context-sensitive help, for information about configuring image acquisition devices with NI MAX.

Configuring a Remote PXI/Compact PCIe Image Acquisition Device

Beginning with Vision Acquisition Software 19.0, NI-IMAQ Real-Time is not included for installation. However, you can still interact with remote real-time targets that have been set up using previous versions of NI-IMAQ and are running currently supported versions of LabVIEW Real-Time.

Note: Install NI-IMAQ and the LabVIEW Real-Time Module on the remote system before you install and configure the image acquisition device. Follow the steps in the NI MAX help window to install software.

Tip: Configuring remote image acquisition devices is similar to configuring local image acquisition devices, except that the procedure for working with camera files is different. Refer to the Measurement & Automation Explorer Help for NI-IMAQ for information about working with camera files on remote image acquisition devices.

• Launch NI MAX.

• In the Configuration tree, expand Remote Systems.

• Expand the appropriate system.

• Expand Devices and Interfaces.

• Expand NI-IMAQ Devices.

• Expand the device you want to configure.
  

Refer to the Measurement & Automation Explorer Help for NI-IMAQ for information about configuring specific NI image acquisition devices. You can access this help file from the NI MAX Help menu by selecting Help»Help Topics»NI Vision»NI-IMAQ.

Configuring NI-IMAQdx

Complete the following steps to configure NI-IMAQdx.

If you are using a USB webcam or other DirectShow-compatible camera, ensure that the camera driver is installed and functioning. For specific information about drivers and camera compatibility, consult your camera manufacturer documentation.

Instructions for configuring an USB3 Vision, GigE Vision, or IP camera are included in the Measurement & Automation Explorer Help for NI-IMAQdx. You can access this help file from the MAX Help menu by selecting Help»Help Topics»NI Vision»NI-IMAQdx.

Installing the High Performance GigE Vision Driver

If you have an Intel Pro/1000 Series gigabit Ethernet Network Interface Card (NIC), it is recommended that you install the High Performance GigE Vision Driver. This will ensure optimized performance and minimal configuration. To associate your hardware with the high performance driver, complete the following steps.

• Install the NIC.

• Right-click the NIC in the Device Manager, and select Update Driver.

• Choose Browse my computer for driver software.

• Browse to the driver location. The newest driver version is installed to <National Instruments>NI-IMAQdxStagingNI GigE Vision.

• Click Next.

• Click Close.
  

Installing the Universal GigE Vision Driver

NI-IMAQdx will work with any standard gigabit Ethernet NIC. To use NI-IMAQdx with a standard gigabit Ethernet NIC, complete the following steps.

• Install the NIC and any related drivers. Refer to the NIC device documentation for installation instructions.

• Enable jumbo frames (frame packet size is greater than 1,500 bytes) on your NIC.
  

  Note: The procedure for enabling jumbo frames on your NIC may vary by manufacturer. Refer to the NIC device documentation for more information about enabling jumbo frames.

• Right-click the NIC in the Device Manager, and select Properties.

• Click the Advanced tab, and Jumbo Frames will appear in the Property list if supported by your NIC.

• Select the largest frame size available and click OK.
  

• Disable the Windows Firewall or any additional third party firewalls on the port. Windows Firewall can be disabled on individual ports from the Advanced tab of the Windows Firewall applet.
  

Configuring NI-IMAQdx for Windows

Complete the following steps to configure NI-IMAQdx for Windows.

• Connect the camera.

• Run NI MAX.
  
  

• Double-click the NI MAX icon on your desktop. You can use NI MAX to modify camera attributes. After you have saved these attributes, they become the default settings for all NI-IMAQdx or NI Vision applications.

• Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.

• For USB3 Vision cameras, NI-IMAQdx may not be associated with the camera if a third-party driver is installed. If this is the case, change the associated driver by right-clicking the camera and selecting Driver»NI-IMAQdx.

• Select the camera from the list. You then can view or modify the camera attributes on the Camera Attributes tab located below the image viewer.
  

Tip: Click the Show Help button to display the help window on the right side of the image viewer. Move your mouse over the properties to view context-sensitive help in the bottom half of the help window.

Configuring NI-IMAQdx for the LabVIEW Real-Time Module

If you are using a Windows development machine, the LabVIEW Real-Time Module, and an RT target, complete the following steps to install and configure NI-IMAQdx.

• Install NI-IMAQdx software on your Windows development machine.

• Ensure that your RT target is connected to the same subnet as the Windows development machine.

• Run NI MAX.
  

• Double-click the NI MAX icon on your desktop.

• Expand the Remote Systems list in the configuration tree.

• Select your RT target in the list.

• Configure your network settings. Refer to the Remote Systems Help in NI MAX (Help»Help Topics»Remote Systems) for instructions about configuring network settings.
  

• Install NI-IMAQdx on the Real-Time target, using one of the following options:
  

• Click the Software item below the RT target in the configuration tree.

• Click Add/Remove Software on the NI MAX toolbar to launch the LabVIEW Real-Time Software Wizard.

• Follow the instructions in the LabVIEW Real-Time Software Wizard to install NI-IMAQdx support for the RT target. It will reboot after installation is complete.
  

• Connect your camera to your remote system.

• Press <F5> to refresh the NI MAX configuration tree. Your camera should be listed in the Remote Systems list.

  Tip: Press <F5> to refresh the configuration tree whenever you connect a new device to an RT target.

• Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.

• Select the camera from the list. You then can view or modify the camera attributes from the Camera Attributes panel located below the image viewer.
  

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.

New Features

• Added support for LabVIEW 2023 Q1 and later
  

Accessing the Documentation and Examples

Documentation and examples are installed onto your hard drive with Vision Acquisition Software. To view the documentation, select Start»National Instruments»Vision Documentation. Some application-specific documents are installed to the application help folder, as listed in the following sections.

Refer to the NI Product Documentation Center at ni.com/docs for the most recent versions of product documentation.

Vision Acquisition Software Documentation for NI MAX

• You can access the Measurement & Automation Explorer Help for NI-IMAQ and the Measurement & Automation Explorer Help for NI-IMAQdx from the NI MAX Help menu by selecting Help»Help Topics»NI Vision. These documents are installed to <National Instruments>MAXHelp.
  

Vision Acquisition Software Documentation for LabVIEW

• You can access the NI-IMAQ VI Reference Help, NI-IMAQdx VI Reference Help, and NI Vision-RIO VI Reference Help from the LabVIEW Help menu.

• NI Example Finder—Illustrates common applications you can create with Vision Acquisition Software. In LabVIEW, select Help»Find Examples. Click the Help button in the NI Example Finder to display the NI Example Finder Help. Vision Acquisition Software examples for LabVIEW are installed to <LabVIEW>examplesVision Acquisition, where <LabVIEW> is the location LabVIEW is installed. The examples for NI 1483 are installed to <labview>examplesFlexRIOIO ModulesNI 1483.
  

Vision Acquisition Software Documentation for LabWindows/CVI

• NI-IMAQ Function Reference Help—Contains reference information about NI-IMAQ functions for LabWindows/CVI.

• NI-IMAQdx Function Reference Help—Contains reference information about NI-IMAQdx functions for LabWindows/CVI.

• Function panel help within LabWindows/CVI—Allows you to right-click within each function to access help for that function, control, function class, and function library. The niimaq.fp, NIIMAQdx.fp, and imaqio.fp function panels are installed to <National Instruments>CVIBin.

• Example programs are installed to
  
  

• <Users>PublicDocumentsNational InstrumentsCVIsamples
  

Vision Acquisition Software for Eclipse and other Text-based Development Environments

• Getting Started with C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition with the Vision Development Module and NI-IMAQdx—Describes how to use the C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition to develop an example C application using the Vision Development Module API and/or NI-IMAQdx, and deploy it on a Linux remote target. This tutorial outlines the basic steps required to build and deploy an example application. This document is installed to <National Instruments>VisionHelp.

• To view text-based example programs, select Start»National Instruments»Vision»Examples, and then select the driver you want to see examples for. You can also navigate to <Users>PublicPublic DocumentsNational Instruments.
  

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.

If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.

For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager documentation.

Using NI Software with Microsoft Windows 11

Microsoft Windows 11 is the latest version of the Windows operating system and features significant changes compared to previous versions. For more information about NI support for Windows 11, refer to NI Product Compatibility for Microsoft Windows 11.

Using NI Software with Microsoft Windows 10

For more information about NI support for Windows 10, refer to NI Product Compatibility for Microsoft Windows 10.

Unsupported Windows Operating Systems

Vision Acquisition Software no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit https://www.ni.com/r/win32bitsupport.

Legal Information

Copyright

© 1996–2023 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

• EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

• Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
  

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.