下载中心

NI VeriStand 2024 Q3 and Drivers Win11 64bitEng VerStand PC版完整版及运行版2024Q3 NIVS24.5.0含驱动版12.58GB

VeriStand是一款用于激励生成、数据采集和计算通道等实时测试应用且具有自定义通道换算功能的软件。
VeriStand应用软件可帮助您为NI实时硬件配置I/O通道、数据记录、激励生成和主机通信。您还可以导入仿真模型和控制算法，通过可配置的警报来响应事件，并通过宏录制、TestStand、.NET和其他软件实现测试自动化。您可以使用运行时可编辑的用户界面，监测应用程序数据、警报状态和系统执行指标，并进行交互。虽然使用VeriStand不需要掌握编程知识，但您也可以使用各种编程软件环境（如LabVIEW、ANSI C/C ++、Python和ASAM XIL）来为VeriStand添加自定义功能。

VeriStand2018SP1及以前的早期版本，为32位版本。VeriStand2019及以后更新版本，为64位版本。但是同一年代并不能同时具有32/64位版本。

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI VeriStand 2024 Q3 and Drives
发布日期：2024/7/16
包含的版本：2024 Q3 PC版、完整版、运行版，版本号24.5.0
受支持的操作系统：
Windows 11
Windows Server 2022 64-bit
Windows 10 64-bit
Windows Server 2016 64-bit
Windows Server 2019 64-bit
语言：英文English
应用程序位数：64位
校验和：
文件大小: 13511106560 字节 (12.58 GB)
修改日期: 2024-07-27 00:48
MD5: 1f844ede24312ac3033b2329f047b69c
SHA1: 0ac33c7cb318ed6eabc3559a8f34459be3f39f57
SHA256: 3d161ac0e82702ac1f6a40754d73f5e6d25ef8b0658db5cd4a5a02fe300a6f23
CRC32: ed9b4e78

百度网盘和NI官方下载地址：
请注册登录机器视觉论坛账号，购买附件查看下载地址

NI VeriStand 2024 Q3 and Drivers Win11 64bitEng VerStand PC版完整版及运行版2024Q3 NIVS24.5.0含驱动版12.58GB

http://visionbbs.cn/thread-31949-1-1.html

(出处: 石鑫华视觉论坛)

2024Q3版未更新自述文件，参考2023Q3版

VeriStand 2023 Q3 Readme

July 2023

This file contains installation instructions and compatibility information for VeriStand 2023 Q3.

You can find more release information on ni.com.

• VeriStand Release Notes: Known issues, bugs fixed since the last release, and other notes about this release

• VeriStand Documentation: Detailed documentation about how to use your product
  

System Requirements

Supported Operating Systems

Installation Instructions

Product Security and Critical Updates

Upgrade and Compatibility Issues

Accessing the Documentation

Finding Examples

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 11

Using NI Software with Microsoft Windows 10

Unsupported Windows Operating Systems

System Requirements

VeriStand 2023 Q3 installs with the following:

• NI-DAQmx 2023 Q3

• NI-VISA 2023 Q3

• NI-SLSC 2022 Q4

• NI-XNET 2023 Q2

• NI R Series Multifunction RIO 2023 Q3
  

Refer to the following sections for system requirements that apply if you use models, LabVIEW functionality, and .NET APIs.

Simulation Models

To configure and run a simulation using your existing compiled model, you need only VeriStand installed. You need the following additional software to perform other tasks with models:

• To develop a model using MathWorks Simulink® software, you must be a licensed user and have MathWorks MATLAB® software (64-bit version) and MathWorks Simulink software installed on the host computer.

• To compile a model developed using MathWorks Simulink software for use on a Microsoft Windows or LabVIEW real-time target, you must be a licensed user of and have the following software installed on the host computer: MathWorks Real-Time Workshop® (Simulink Coder®). Refer to the NI website for a list of compilers that are tested and supported.
  

Note  You do not need the full VeriStand environment to generate a compatible model. Instead, you can install VeriStand Model Generation Support Toolbox for Simulink or the VeriStand Model Framework.

If you use other modeling environments, contact your model vendor for specific requirements.

LabVIEW

To create custom devices, menu items, workspace controls and indicators, or timing and sync devices, you must have LabVIEW 2023 64-bit. The LabVIEW functionality in VeriStand always requires like-numbered versions.

.NET

The VeriStand .NET APIs require the following Microsoft software:

• Microsoft .NET Framework 4.6.2, which uses Microsoft .NET Common Language Runtime (CLR) 4.6.2.

• A .NET environment capable of interacting with .NET Framework 4.6.2-based assemblies, such as Microsoft Visual Studio 2015 or later.
  

Supported Operating Systems

VeriStand 2023 Q3 supports the following operating systems:

Recommended PXI Linux RT System Image

When formatting a disk with a PXI Linux RT system image for VeriStand 2023 Q3, select Linux RT System Image 2023 Q3 and enable support for the LabVIEW 2023 programming environment. Doing so prevents driver version conflicts while deploying XNET to a real-time target.

Installation Instructions

Install VeriStand with either the online installer or with installation media.

• Log on as an administrator or as a user with administrator privileges.

• Disable automatic virus detection programs.
  Note   Some virus detection programs interfere with the installer.

• Activate VeriStand when prompted by the installer or activate later with NI License Manager.

• To use LabVIEW with VeriStand, install the like-numbered version of LabVIEW on the host computer.

• Check your computer for viruses and enable your virus detection.
  

Online Installer

Download the VeriStand installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.

Installation Media

If you purchased this product with media, insert the VeriStand installation media and follow the instructions that appear on the screen.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.

Upgrade and Compatibility Issues

The following sections describe issues to be aware of when you upgrade to VeriStand 2023 Q3.

Note  NI recommends that you review the Upgrade and Compatibility Issues in the readme files for each VeriStand version between the version from which you are upgrading and VeriStand 2023 Q3. To access the documents, refer to the VeriStand Release Notes.

Primary Control Loop (PCL) Timing Source

As of VeriStand 2023 Q2, the System Explorer default for the PCL DAQ timing source is Signal From Task (Sample Complete). This default applies to new projects under the following conditions:

• Setting the timing source to DAQ Timing.

• Setting the timing source to Automatic Timing when a NI-DAQ device has at least one analog input hardware-timed single point channel.
  

Note  This behavior will not change for existing, upgraded projects.

Uncompiled Models

VeriStand does not support communication with uncompiled models.

Models Created from LabVIEW VIs

Models compiled from LabVIEW VIs (.lvmodel or .lvmodelso files) using earlier versions of LabVIEW must be recompiled using LabVIEW 2023 64-bit. The LabVIEW functionality in VeriStand requires like-numbered versions.

Note  Models built with LabVIEW 2023 Q1 and later no longer support simulation subsystems developed using the LabVIEW Control Design and Simulation Module add-on.

Models Compiled for Previous Versions

Take the following actions to ensure your models are 64-bit compatible:

• Recompile all Windows models for 64-bit.

• Recompile all PharLap models for Linux RT.
  

Beginning with VeriStand 2021, the VeriStand Model Framework contains changes to the files used to develop and compile models in C/C++ and third-party modeling environments. If your system contains models compiled for Linux RT 64-bit with previous versions of the Model Framework, choose from the following options to continue to use the models:

• If you do not need to modify your model, continue to use the model as-is.

• If you need to modify model functionality, and do not require the latest Model Framework version updates, recompile the model against the deprecated Model Framework files. These files are installed at <RootDrive>VeriStandersionModelInterfacecustomsrcobsolete.
  

Migrating Files from VeriStand 2010 through 2018 SP1

VeriStand 2023 Q3 can open projects from VeriStand 2010 through 2018 SP1 using the Open Legacy Project option in the Welcome tab.

LabVIEW can no longer automate actions with legacy stimulus profiles. Consider migrating to modern stimulus profiles and real-time sequences.

In addition, the following LabVIEW automation VIs are deprecated and no longer included with VeriStand:

• NI VeriStand - Get Alarm Status.vi

• NI VeriStand - Get Engine State.vi

• NI VeriStand - Lock Workspace File.vi

• NI VeriStand - Run Workspace File.vi

• NI VeriStand - Stop Workspace File.vi

• NI VeriStand - Unlock Workspace File.vi
  

VeriStand Custom Devices Included with VeriStand Suite

Beginning with VeriStand 2021, the VeriStand suite installer will include custom devices for both offline and online installation. To install custom devices separately, refer to the release page for each Custom Device on the VeriStand Add-ons support page.

Accessing the Documentation

VeriStand includes the following documentation resources:

Note  If you install VeriStand with a compatible version of LabVIEW, you can access a subset of VeriStand related materials in the LabVIEW Help. This includes information about VeriStand VIs and extending VeriStand functionality. To access this help from LabVIEW, select Help»LabVIEW Help.

Finding Examples

VeriStand includes the following types of examples:

• VeriStand Project — An example VeriStand project, including related items such as a system definition, a Workspace screen file, compiled models, and NI-XNET files, are located in the <Public Documents>National InstrumentsVeriStand 2023ProjectsExample directory.

• Stimulus Profile Editor — VeriStand Stimulus Profile Editor examples are located in the <Public Documents>National InstrumentsVeriStand 2023Examples directory.

• ASAM XIL and Custom Device Sample Configurations — Configuration examples for ASAM XIL and custom devices are located in the <Public Documents>National InstrumentsVeriStand 2023Examples directory.
  Note   On the Windows OS, the default location of the <Public Documents> directory is C:UsersPublicPublic Documents.

• LabVIEW API — LabVIEW examples that use the VeriStand API are located in the <Program Files>National InstrumentsLabVIEW 2023examplesNI VeriStand directory or in the <Program Files>National InstrumentsLabVIEW 2023examplesNI VeriStand Custom Devices directory.
  

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.

If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.

For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager documentation.

Using NI Software with Microsoft Windows 11

Microsoft Windows 11 is the latest version of the Windows operating system and features significant changes compared to previous versions. For more information about NI support for Windows 11, refer to NI Product Compatibility for Microsoft Windows 11.

Using NI Software with Microsoft Windows 10

For more information about NI support for Windows 10, refer to NI Product Compatibility for Microsoft Windows 10.

Unsupported Windows Operating Systems

VeriStand no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit https://www.ni.com/r/win32bitsupport.