石鑫华视觉
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
LabVIEW 2011SP1 Datalogging and Supervisory Control Module Win32Eng LV2011SP1数据记录与监控模块DSC2011SP1
LabVIEW数据记录和监控(DSC)模块适用于开发HMI/SCADA或高通道数数据记录应用程序。
LabVIEW数据记录和监控(DSC)模块是LabVIEW编程环境的一个附加软件。您可以使用此模块以及数十到数万个标签，快速开发分布式监测和控制系统。该模块包含将数据记录到网络历史数据库、跟踪实时和历史趋势、管理警报和事件、将LabVIEW实时终端和OPC设备联网到一个完整系统，以及为用户界面添加安全性等任务所需的工具。
百度网盘下载和NI官方下载地址：
请注册视觉论坛会员登陆后购买附件下载查看
F1补丁（20MB）
百度网盘下载和NI官方下载地址：
请注册视觉论坛会员登陆后购买附件下载查看
LabVIEW 2011SP1 Datalogging and Supervisory Control Module 2011SP1 LV2011SP1数据记录与监控模块DSC2011SP1
http://pcmv.cn/thread-22843-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
LabVIEW 2011 SP1 Datalogging and Supervisory Control Module Readme
Version 11.0.1
December 2011
This file contains important information about the LabVIEW 2011 SP1 Datalogging and Supervisory Control (DSC) Module, including installation issues and bug fixes. Refer to the LabVIEW Datalogging and Supervisory Control Module Release and Upgrade Notes, which are available in your DSC Module software kit, for upgrade and compatibility issues of the DSC Module and a complete list of the new features and changes from the DSC Module 2010.
Supported Operating Systems
Installation Instructions
Notice Regarding Microsoft Silverlight Installation and Redistribution
Licensing
DSC Module 2011 SP1 Features and Changes
Known Issues
Bug Fixes
Supported Operating Systems
The DSC Module supports the following operating systems:
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 2 or later
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
The DSC Module does not support Windows NT/Me/2000/98/95 or the Windows Server non-R2 editions. Refer to the LabVIEW Datalogging and Supervisory Control Module Release and Upgrade Notes for a complete list of system requirements.
Note: Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). To learn how this might affect your use of Windows Server 2003 and what actions you might have to take, visit ni.com/info and enter the Info Code PAESupport.
Installation Instructions
You can install all of your LabVIEW products—including the DSC Module—using the LabVIEW 2011 Platform DVDs. You can find installation instructions for the DSC Module along with activation instructions in the following locations:
LabVIEW Datalogging and Supervisory Control Module Release and Upgrade Notes, which are available in your DSC Module software kit.
LabVIEW Release Notes, which are available in your LabVIEW software kit.
LabVIEW 2011 Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.
To request additional LabVIEW 2011 Platform DVDs, refer to the National Instruments Web site.
Note: If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Notice Regarding Microsoft Silverlight Installation and RedistributionInstalling Microsoft Silverlight
Some NI components require Microsoft Silverlight. If you do not have Silverlight installed on your computer, but you do have Internet access, you can download the installer from Microsoft at http://www.microsoft.com/silverlight/. If you do not have Internet access, you can install Silverlight from this NI distribution media.
Using Microsoft Silverlight
You may not use any H.264/MPEG-4 AVC and/or VC-1 technology or codecs included in or with Microsoft Silverlight software which may be provided by NI as Third Party Software, including for the purpose of encoding or decoding video in compliance with, or making use of, the H.264/AVC visual standard or the VC-1 video standard.
Redistribution of Microsoft Silverlight
If you create and distribute software applications that contain NI components that also use Microsoft Silverlight, you may be authorized to include Silverlight in installers or on physical media as long as you comply with certain requirements. Refer to the notice.txt file in the <National Instruments>_Legal InformationMicrosoft Silverlight 4.0 directory or the NI standard End User License Agreement (EULA) located in the <National Instruments>CommonMDFEULADepotNIReleased directory for more information.
Licensing
The DSC Module relies on licensing activation. You have a temporary license for a 30-day evaluation period. If you do not activate the DSC Module license, the DSC Module operates in evaluation mode, by default, for a 30-day evaluation period. When the evaluation period expires, you cannot use the DSC features, and LabVIEW hides the DSC VIs and user interfaces. You must activate a valid DSC Module license to continue using the DSC Module.
Refer to the LabVIEW Release Notes for more information about licensing in LabVIEW.
The NI OPC Servers application installed with the DSC Module provides a temporary license for a two-hour evaluation period. You must activate a valid license to continue using the NI OPC Servers application after the evaluation period expires.
DSC Module 2011 SP1 Features and Changes
This version includes the following new VIs:
OPC UA VIs—Use the VIs on the OPC UA, OPC UA Server, and OPC UA Client palettes to create a customized OPC UA server application or OPC UA client application and exchange data between OPC UA client and OPC UA server applications. The OPC UA VIs are located on the Data Communication palette.
Known Issues
You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the DSC Module.
Bug Fixes
The following items are the IDs and titles of a subset of issues fixed in the DSC Module. If you have a bug ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the DSC Module.
| Bug ID | Fixed Issue |
| 93918 | User defined alarm that starts with "alarm" does not work. |
| 178809 | The hypertrend sometimes draws backwards horizontal lines while in live mode. |
| 195296 | HyperTrend Max and Min Cursors do not return correct Max or Min values. |
| 251949 | DataSet Marking I/O Server does not log correctly if in a nested lvlib. |
| 258747 | Historical Data Viewer cannot select a time in the future. |
| 280682 | Historical Data Viewer LV 2010 - Export/Import settings to XML file doesn't support localized OS. |
| 283892 | Error -1967362038 returns from Search Variable Container when accessing a process with an I/O Server. |
Important Information
Copyright
© 2011 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
In regards to components that use Citadel 5, the following copyright applies. Copyright © 1994 Hewlett-Packard Company. Permission to use, copy, modify, distribute and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appears in all copies and that both that copyright notice and this permission notice appear in supporting documentation. Hewlett-Packard Company makes no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty.
Trademarks
LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.
Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.