NI SignalExpress 2.5.1 Win32德语/日语/法语/英文 数据记录软件Signal Express 2.5.1
SignalExpress
SignalExpress使您无需编程即可记录、分析和显示测量设备的数据。
SignalExpress是一款交互式数据记录软件,让您无需编程,即可从数百种数据采集仪器和设备上快速采集、分析并显示数据。SignalExpress用户可以控制400多台基于PC的独立仪器,以及来自250多个数据采集设备的日志数据。该软件可以处理和分析信号,并将结果信号发送到硬件设备。SignalExpress还提供自动LabVIEW代码生成功能,可扩展应用程序。用户可以轻松创建自定义报告,并将其导出到LabVIEW、DIAdem或Microsoft Excel中。
Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://labviewvision.com/thread-490-1-1.html
视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://labviewvision.com/thread-26524-1-1.html
发布日期:2008/8/13
包含的版本:2.5.1
受支持的操作系统
Windows
Windows 2000
Windows XP
语言:德语, 日语, 法语, 英文
应用程序位数:32位
校验和:
文件大小: 491624992 字节 (468.85 MB)
修改日期: 2008-11-18 05:25
MD5: 61cb8fdc9ef29d1da2a12bae8745fa6c
SHA1: c03225a2e0d11f9734f8113125d8c688166a3c7b
SHA256: 8124c7f8c2f4a93654085e35f610f67a497382c9ee15586bed4083307671ecb9
CRC32: 67e99a6a
百度网盘和NI官方下载地址:
请注册登录视觉论坛账号,购买附件查看下载地址
NI SignalExpress 2.5.1 Win32德语/日语/法语/英文 数据记录软件Signal Express 2.5.1
http://labviewvision.com/thread-29824-1-1.html?fromuid=9
(出处: 机器视觉论坛)
NI LabVIEW SignalExpress Tektronix Edition 2.5.1 Readme
July 2008
This file contains important information about LabVIEW SignalExpress Tektronix Edition, including known issues, installation, and compatibility issues. Refer to Getting Started with LabVIEW SignalExpress Tektronix Edition for information about getting started with LabVIEW SignalExpress Tektronix Edition. You can access this PDF by selecting Help»Getting Started with»Tektronix Edition in the LabVIEW SignalExpress environment.
The file contains the following information that you need to understand.
Overview
New Features
System Requirements
Installation Instructions
Accessing the Help
Finding Examples
Compatibility
Known Issues
Bug Fixes
Overview
You can use LabVIEW SignalExpress Tektronix Edition to connect Tektronix instruments to a PC. With built-in USB plug-and-play capabilities in Windows XP and Vista, LabVIEW SignalExpress Tektronix Edition automatically detects when you connect a supported Tektronix instrument to the PC. With this functionality, you can immediately control the instrument and acquire data from the instrument.
Note On Windows Vista x64 Edition, the 64-bit version, USB plug-and-play functionality does not work because LabVIEW SignalExpress Tektronix Edition is a 32-bit application.
New Features
LabVIEW SignalExpress Tektronix Edition 2.5.1 is built on LabVIEW SignalExpress 2.5. All mentions of LabVIEW SignalExpress in this documentation can refer to either LabVIEW SignalExpress or LabVIEW SignalExpress Tektronix Edition. Refer to the LabVIEW SignalExpress Help for more information about new features in LabVIEW SignalExpress 2.5 that are not Tektronix-specific.
Added Instrument Support
LabVIEW SignalExpress Tektronix Edition 2.5 adds support for the following Tektronix instruments:
DPO2000 Digital Phosphor Oscilloscopes
MSO2000 Mixed Signal Oscilloscopes
New Step
The following step has been added:
Tek DPO/MSO2000
System Requirements
To run LabVIEW SignalExpress Tektronix Edition, National Instruments recommends that your system meet the following requirements:
512 MB of memory
Pentium 4 processor or equivalent (Pentium III or Celeron 600 MHz minimum)
Installation Instructions
Insert the NI LabVIEW SignalExpress Tektronix Edition CD in your CD-ROM drive and follow the prompts through the installation.
Note If you are using Windows 2000, you must install Service Pack 4 and all additional critical updates before you install LabVIEW SignalExpress Tektronix Edition.
LabVIEW SignalExpress Tektronix Edition installs or updates the following applications:
MAX 4.3
LabVIEW SignalExpress 2.5.1
LabVIEW SignalExpress Tektronix Edition 2.5.1
LabVIEW Run-Time Engine 7.1
LabVIEW Run-Time Engine 8.0
LabVIEW Run-Time Engine 8.2
LabVIEW Run-Time Engine 8.5
IVI Compliance Package 2.3
NI-VISA 4.2
Microsoft .NET Framework 2.0
Note There is a known installation issue if Microsoft .NET Framework 2.0 Beta 1 is present on your computer. This issue causes the installation of NI SignalExpress Tektronix Edition to fail. To correct this problem, uninstall Microsoft .NET Framework 2.0 Beta 1 or upgrade to Microsoft .NET Framework 2.0 or later before you run the NI SignalExpress Tektronix Edition installer again.
The NI LabVIEW SignalExpress Tektronix Edition CD installs both LabVIEW SignalExpress Tektronix Edition 2.5.1 and LabVIEW SignalExpress 2.5. All mentions of LabVIEW SignalExpress in this documentation can refer to either LabVIEW SignalExpress or LabVIEW SignalExpress Tektronix Edition.
Accessing the Help
Refer to the LabVIEW SignalExpress Help, accessible by selecting Help»LabVIEW SignalExpress Help from the pull-down menu in LabVIEW SignalExpress, for information about LabVIEW SignalExpress Tektronix Edition.
Finding Examples
Example projects for LabVIEW SignalExpress are located in the signalexpressexamples folder. You can modify an example project to fit an application, or you can copy and paste from one or more examples into a project that you create. A Tektronix-specific tutorial is located in the signalexpresstekedexamples folder.
Compatibility
LabVIEW SignalExpress is compatible with the following products:
NI-DAQmx 7.3 or later
NI-SCOPE 2.7 or later
NI-FGEN 2.2 or later
NI-HSDIO 1.3.1 or later
NI-HWS 1.3.1 or later
NI-DMM 2.4.2 or later
IVI Compliance Package 2.1 or later
IVI Driver Toolset 2.0 or later
To convert a LabVIEW SignalExpress project to a LabVIEW VI, you must have the LabVIEW 7.1 Full Development System or greater installed.
Known Issues
To support the AFG3011 arbitrary/function generator, you must download the latest IVI driver from ni.com/idnet.
The Tek AFG3000 step might not notify you when you enter a parameter value that is outside the valid range for that parameter. The instrument ignores invalid parameter values.
You cannot activate the sweep mode of an AFG3000 arbitrary/function generator from LabVIEW SignalExpress.
The Ramp symmetry (%) parameter on the Step Setup tab of the Tek AFG3000 step displays values without a decimal point. However, the instrument handles the ramp symmetry with a resolution of 0.1%.
If you set a Tektronix DPO3000 series product to a bandwidth of 150 MHz and connect the instrument to LabVIEW SignalExpress or if LabVIEW SignalExpress recalls an instrument setup with Bandwidth (Hz) in the Tek DPO3000 step set to 150 MHz, LabVIEW SignalExpress sets Bandwidth (Hz) to Full.
On the Step Setup tab for the Tek DPO3000 step, the Acquired Waveform display is incorrectly scaled by a factor of 0.8. However, the underlying data is correct and the waveform displays correctly in the Data View.
When you convert a project to a LabVIEW block diagram, some VIs may prompt you to save. Mass compile the LabVIEWi.lib directory to prevent this dialog from appearing each time you convert a project.
In the Load from ASCII step, if you deselect an output signal and it still appears to be selected, select another signal. LabVIEW SignalExpress deselects the original signal.
When you load a project created in LabVIEW SignalExpress 1.1 and earlier that contains a Limit Test step with an output displayed in the Data View, the Data View does not display the signal. Create a new viewer in the Data View and drag the Limit Test output signal into the Data View to view the signal.
When you convert a project that contains features not supported in LabVIEW to a LabVIEW block diagram, LabVIEW SignalExpress generates a LabVIEW block diagram with one Express VI. You cannot open the block diagram of the generated Express VI. If you include the generated Express VI in a distribution with the LabVIEW Application Builder, you must install LabVIEW SignalExpress to any target computers on which you run the LabVIEW-built application.
LabVIEW SignalExpress only supports one version of LabVIEW at a time. When you install LabVIEW SignalExpress, it finds the most current installed version of LabVIEW and installs support for LabVIEW SignalExpress into that version. If you later install a new version of LabVIEW, you need to uninstall and reinstall LabVIEW SignalExpress. When you reinstall, LabVIEW SignalExpress will install support for the new version of LabVIEW.
LabVIEW SignalExpress only supports one version of LabVIEW at a time for project conversion into LabVIEW. LabVIEW SignalExpress only installs support for the latest version of LabVIEW installed on the system. However, when you convert a LabVIEW SignalExpress project to a LabVIEW block diagram, LabVIEW SignalExpress calls the last version of LabVIEW opened on the system. If the last version of LabVIEW open on the system is not the version of LabVIEW with LabVIEW SignalExpress support installed, you must launch the version of LabVIEW with LabVIEW SignalExpress support and re-generate the project.
Registration information is saved on a per-user basis in Windows Vista. When you change users, the user information that appears when you launch LabVIEW SignalExpress may appear incorrectly.
Creating a source distribution in LabVIEW of a LabVIEW SignalExpress User Step template VI may fail and return an error. For one possible solution for this error, navigate to the Additional Exclusions page of the Source Distribution Properties dialog box and select the Remove unreferenced project library members option to remove the error.
When viewing scalar data in a table, the data history of the scalar data is not saved unless you previously viewed the scalar data in a chart display.
The Save to ASCII/LVM step does not save any units associated with the specified data.
You can configure only one IVI session name for a driver. If you configure more than one IVI session name for a driver, you invalidate existing IVI session names for that driver.
LabVIEW prompts you with a warning dialog box during project conversion if LabVIEW loads vi.lib subVIs from the National InstrumentsLabVIEW directory rather than from the directory in which you saved a LabVIEW SignalExpress project. Click the OK button to resume conversion.
The Load from ASCII, Load from LVM, and Load from SPICE steps convert up to 20 imported signals into the LabVIEW VI during project conversion. If you want to import more than 20 signals and then convert the project to a LabVIEW VI, use two or more Load from ASCII, Load from LVM, or Load from SPICE steps.
You cannot convert a LabVIEW SignalExpress project to a LabVIEW block diagram if a hardware step in the project uses software triggers.
Text in any step configuration view does not display correctly if you set monitor resolution to 1400 x 1050 or higher or if you use large fonts.
Due to driver and operating system issues, absolute time stamps have an inaccuracy of 100 ms to 200 ms. National Instruments recommends that you use relative time stamps.
You cannot use a software trigger if the IVI FGEN Standard Function step or the IVI FGEN Arbitrary Waveform step are in continuous generation mode or if the IVI FGEN steps are in a sweep operation. During a sweep operation, the NI-FGEN devices send a start trigger only at the first sweep iteration.
If you configure a device to start on a digital trigger and the trigger source is the start trigger of an analog output NI-DAQmx supported device, the device might receive the start trigger before the generation starts. This can occur the first time you run the project or on the first iteration of a continuous execution. To work around this issue, configure the analog output device to be a slave by configuring the device with a digital trigger and selecting a trigger signal from another device as the trigger source.
If you are installing both the System Identification Toolkit 3.0 and LabVIEW SignalExpress 2.5, you must install the System Identification Toolkit 3.0 before you install LabVIEW SignalExpress 2.5. Installing the System Identification Toolkit 3.0 after you install LabVIEW SignalExpress results in an error upon launch of LabVIEW SignalExpress 2.5. To resolve the error, you can uninstall the affected components and reinstall in the correct order. The easiest way to resolve the error is to install the free System Identification Toolkit 3.0.1 upgrade. Refer to ni.com for more information on obtaining the free System Identification Toolkit 3.0.1 upgrade CD.
Bug Fixes
Bug ID | Fixed Issue |
4BBCR2LY | Need longer timeout for AutoSetup for new video app |
4B8FI8XJ | Tek AFG3000 step causes Create Analog Signal step not to work |
4B5FGUXJ | Waveforms not displayed on front panel of the arb after waveform type is changed a few times |
4AAAG5LY | Cannot perform multi-channel triggered acquire |
44LBKDZL | Step Setup view is different from image on the scope |
403GQGI8 | Confusing pop-up: Tektronix code cannot be generated at this time |
38BF4MN7 | Window Menu: Arrange All - tiles the windows but does not bring them all to the front |
3BRAPM95 | Unchecking "Relative time" results in plot x-scale labeled "3.195G" |
3ECDGCTQ | Steps dependent on other steps that are not executable shouldn't be executable either |
3HG9CKNR | Refresh device list doesn't refresh enum in HW block |
3IRCSLXX | No option to send digital data to a viewer in right-click menu |
3SJADPI8 | Instruments connected via USB can appear twice in IVI session name ring of IVI steps |
422E16RS | Load from SPICE - switching between Domain type does not re-show the Imported Signal (it goes blank) |
4248BMI8 | Non active log doesn't playback when viewed |
429CNLDE | Load from ASCII block does not undo correctly |
42NJGSI8 | Statistic step doesn't work with U32 data |
42QB80YG | Header should not clip text (horizontally) |
42RDHPLY | Save to ASCII preview graph legend incorrect after undo/redo |
439F04LY | Logging tool - undo redo messes up signal selection |
43GDR5YG | Viewer - Unchecking a plot in the legend should not force autoscale X |
444F4E26 | Output Range control should be exposed in Power Supply Interface |
445DS10X | Annotations don't show up when doing playback |
44SACETQ | Timing and Transition - Edge and Pulse markers are not working |
45AEFHK9 | New Logs are not visible in the LabVIEW SignalExpress Express VI |
45BESONB | Drag and drop of docked config page does not indicate to SE that files needs to be saved |
45ECNJRS | Recording Options - Setting value doesn't change it if you don't click outside the control |
45ED3RRS | If you codegen a logging project that has logged data, LabVIEW SignalExpress Express VI also requires logged data to be present in the correct disk location |
45FD89TQ | Actual log much longer than requested. The additional data are also incorrect. |
45FA8OYG | Channel View: device not visible in Playback (refresh devices only applies to current work area) |
45N91UYG | Playback - Sample rate should be displayed in the playback option view |
45NDRTYG | Playback Options - Logged signals tree view should allow right-click menu to set Active Log |
45OGQOI8 | Viewer stays empty when dragging an imported log in playback mode |
45SD65YG | Restore Defaults should restore application specific defaults |
45TD6UOK | Creating data the first time is slow |
45TDTNK9 | Viewer doesn't autoscale Y axis correctly when scale is changed from Logarithmic to linear |
45TJ94I8 | Sweep's output dialog doesn't work well when there are many signals in the project. |
45TJDDI8 | The sweep step should output the iteration count |
464MGU2W | Delete Log dialog does not mention that Log is being used in Playback as well |
465I8W9 | Limit Test returns 'Missing inputs' error when user switches to limits defined by input signals |
465GF6RS | IVI Scope logs data poorly |
467CN2N7 | Code generation of synchronized steps fails in certain cases |
467DG4LY | Start condition with NI-Scope acquired sine wave doesn't work |
468DN7FN | Warning message pops up while building an application that contains 2 LabVIEW SignalExpress Express VIs |
46BB1PWW | Synchronization Code Should Filter Duplicate ClockTrigger Names |
46BCMEXA | Can't stop VI after error from black box code gen |
46BD2D00 | Viewers - Cursors fails to update when the signal is renamed |
46DDCH2W | Menu hot keys don't work when Signal Selection table is active in Recording Options tab |
46DF9RRS | Project Documentation tab - No button or key sequence to select all |
46EA3S3I | Limit Test displays "upper limit" terminal when >Lower limit is selected |
46ICP82W | Logging Signals Selection dialog forgets signals if you cancel and then return |
46IHN700 | Export to Excel - dragging log group from log window doesn't export all data in group |
46JCRCLY | Conditional repeat does not allow logged inputs |
46K9CA0X | Scalar log and viewing it on the chart does not update the current value |
46K9HB0X | "First Log Complete" shows up at unexpected time when having imported a log |
46KADARS | Project conversion from within LabVIEW gives strange VIs for single and loop modes |
46KC2ENB | Dropping a array of double onto a non-Table viewer causes error dialog |
46LCPA3I | Statistics - selecting checkboxes while code is thinking resets buttons |
46LFM4X0 | Deleting a task while it is running in MAX causes errors |
46NFFFNR | Subset and resample allows negative subset lengths |
46O8CL0X | Loading project with viewer loading empty |
46O8D60X | Loading project with empty top viewer in playback mode. |
46PAI7XA | Channel View does not display all devices available |
46PCLIGX | Converting log to ASCII loses timestamp |
472C1UYG | Incorrect information in About window |
474952W9 | Examples that use DAQ Assistant should use 'Let NI-DAQ choose' whenever possible to avoid errors when user runs project on their hardware. |
474KQU00 | LabVIEW SignalExpress crashes when grouped output datatype changes when that output is not the first created output for a step |
475A0DK9 | Logging issues when device channel being logged is changed |
4760UJW9 | Snapshots in documentation appear empty when project reloaded |
47S9GENB | Drag and drop a jpg file from explorer onto Documentation tab, SignalExpress crashes eventually |
47THBIAF | Playback on 1 Sample (on demand) signals doesn't scroll correctly |
48CG1LKZ | LabVIEW SignalExpress cursor values do not update when waveform changes |
48HAM62B | Cannot print graphics in Landscape mode |
48P91NX6 | Exporting logged scalar data to Excel during runtime gives blank Excel spreadsheet and clears log |
492DCAPJ | Statistics Step does not properly handle array of scalars input |
© 2004-2008 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments, NI, ni.com, LabVIEW, and SignalExpress are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
Tektronix® and Tek are registered trademarks of Tektronix, Inc.
Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Members of the National Instruments Alliance Partner Program are business entities independent from National Instruments and have no agency, partnership, or joint-venture relationship with National Instruments.