石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

LabVIEW Modulation Toolkit 4.3.4 Win32/64Eng LabVIEW调制工具包4.3.4

文章来源:石鑫华视觉网时间:2022-12-05 12:39:46 点击:173

LabVIEW Modulation Toolkit 4.3.4 Win32/64Eng LabVIEW调制工具包4.3.4

LabVIEW调制工具包
LabVIEW调制工具包为LabVIEW提供了调制信号生成和分析功能,适用于研究、设计、原型,验证和测试应用。
LabVIEW调制工具包是LabVIEW的一个软件附件,提供了用于生成、分析、处理和可视化模拟和数字调制信号的功能和工具。该工具包可让您使用各种调制方案(包括AM、FM、PM、ASK、FSK、MSK、PSK和QAM)对信号进行调制和解调。使用LabVIEW调制工具包,您可以执行信道编码、交织编码和均衡等等高级信号处理,也可以测量频率误差、误差矢量幅度(EVM)和误码率(BER)等参数,以验证信号质量。使用LabVIEW调制工具包,您还可以应用常见的信号减损,并通过星座图、眼图和网格图等可视化工具查看信号。

Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://labviewvision.com/thread-490-1-1.html

视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://labviewvision.com/thread-26524-1-1.html

发布日期:2012/06/28
包含的版本:4.3.4
受支持的操作系统
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
语言:English
应用程序位数:32/64位
校验和:
文件大小: 683447072 字节 (651.79 MB)
修改日期: 2022-03-25 06:09
MD5: 5d2dd5893731026d590694f652eff9bb(秒传)
SHA1: 5d177800d407d4fefcf523acf430b60cee14c1a0
SHA256: 0be88cb40b10a43207b0dd5dbd66cc315388f8bed5c626457fe3f028bf1e9a4c
CRC32: 15679867

百度网盘和NI官方下载地址:
请注册登录视觉论坛账号,购买附件查看下载地址

LabVIEW Modulation Toolkit 4.3.4 Win32/64Eng LabVIEW调制工具包4.3.4

http://labviewvision.com/thread-29789-1-1.html?fromuid=9

(出处: 机器视觉论坛)


NI LabVIEW Modulation Toolkit Readme

2013

Version 4.3.4

Thank you for using the NI LabVIEW Modulation Toolkit (MT). This file contains important information about the toolkit and is organized into the following sections:

  • New Features

  • Supported Hardware

  • System Requirements

  • Supported Drivers

  • Installed File Names and Locations

  • Updates and Notifications

  • Uninstalling/Modifying NI LabVIEW Modulation Toolkit

  • Known Issues

  • Bug Fixes

  • Automating the Installation of NI Products

  • Important Information

New Features

NI LabVIEW Modulation Toolkit 4.3.4 adds support for LabVIEW 2012.

NI LabVIEW Modulation Toolkit 4.3.2 adds support for LabVIEW 2011.

NI LabVIEW Modulation Toolkit 4.3 includes the following new features:

  • Support for MLSE demapper for CPM and MSK

  • Support for non-systematic encoder-decoder for BCH and Hamming codes

  • Support for clock frequency offset estimation and correction for FSK, PSK, and QAM

  • Support for palette-level function for autoconfiguring and performing CCDF measurement

NI LabVIEW Modulation Toolkit 4.2 includes the following new feature:

Japanese localization for LabVIEW application programming interface (API) and documentation

Supported HardwareVector Signal Generators

  • NI PXI-5670

  • NI PXI-5671

  • NI PXIe-5672

  • NI PXIe-5673

  • NI PXIe-5673E

Device-specific information about these modules is included in the NI RF Signal Generators Help.

Arbitrary Waveform Generators

  • NI PXIe-5442

  • NI PXIe-5450

  • NI PXIe-5451

Vector Signal Analyzers

  • NI PXI-5660

  • NI PXI-5661

  • NI PXIe-5663

  • NI PXIe-5663E

  • NI PXIe-5665

Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help.

Vector Signal Transceiver

  • NI PXIe-5644R

Digitizers

  • NI PXI-5621

  • NI PXI-5620

  • NI PXI-5122

  • NI PXI-5124

  • NI PCI-5122

  • NI PCI-5124

  • NI PXI-5922

  • NI PXI-5142

  • NI PXIe-5122

  • NI PXIe-5622

Device-specific information about these modules is included in the NI High-Speed Digitizers Help.


System RequirementsSupported Operating SystemsNote   NI LabVIEW Modulation Toolkit 4.3.4 does not support Windows 8.

NI LabVIEW Modulation Toolkit 4.3.4 and later supports the following operating systems:

  • Windows 7 (32-bit and 64-bit)

  • Windows Vista (32-bit and 64-bit)

  • Windows XP Service Pack 3 (32-bit)

  • Windows Server 2003 R2 (32-bit)

  • Windows Server 2008 R2 (64-bit)

Note   NI LabVIEW Modulation Toolkit 4.3.4 and later does not support Windows Server non-R2 editions.

It is recommended that you have the most recent service pack for your operating system installed.

Supported Real-Time Operating Environments

NI LabVIEW Modulation Toolkit 4.3.4 and later supports the following real-time operating environments:

  • LabVIEW Real-Time Module

Minimum System Requirements

  • Free hard drive space—1 GB

  • RAM—256 MB

Recommended System

  • Free hard drive space—4 GB

  • RAM—1 GB

Note  Instrument drivers are not required for NI LabVIEW Modulation Toolkit operation in simulation mode. However, the toolkit installs examples for the supported drivers if they are present on the system. Refer to the Supported Drivers section of this document for more information.

Application Development Environments (ADEs)

Note  You should install ADEs, such as NI LabVIEW before installing NI LabVIEW Modulation Toolkit. To add support for ADEs installed after installing NI LabVIEW Modulation Toolkit, modify your NI LabVIEW Modulation Toolkit installation or launch the NI LabVIEW Modulation Toolkit installer again.

  • NI LabVIEW 2009 SP 1 (32-bit), 2009 SP 1 (64-bit), 2010 SP 1 (32-bit), 2010 SP 1 (64-bit), 2011 SP1 (32-bit), 2011 SP1 (64-bit), 2012 SP1 (32-bit), or 2012 SP1 (64-bit)

  • NI LabVIEW Real-Time Module 2009 SP 1, 2010 SP 1, 2011 SP1, or 2012 SP1

Supported Drivers

Install all the instrument drivers for the hardware you intend to use before installing the NI LabVIEW Modulation Toolkit. The toolkit supports the following drivers:

  • NI-RFSA 2.1 or later

  • NI-SCOPE 3.4 or later

  • NI-RFSG 1.4 or later

  • NI-FGEN 2.5.1 or later

If you install one or more of the aforementioned drivers after installing the NI LabVIEW Modulation Toolkit 4.3.4, driver-specific toolkit examples and palette VIs are not present. To install these driver-specific files, you must run the Modify function from the NI LabVIEW Modulation Toolkit installer. To do so, follow the instructions found in the Uninstalling/Modifying NI LabVIEW Modulation Toolkit section.

Installed File Names and Locations

  • <NIDIR> is an alias for the following National Instruments file folder location:

    • LabVIEW (32-bit): Program Files(x86)National Instruments

    • LabVIEW (64-bit): Program FilesNational Instruments

    • LabVIEW (32-bit): Program FilesNational Instruments

    • Windows 7 (32-bit)/Vista (32-bit)/XP (32-bit)

    • Windows 7 (64-bit)/Vista (64-bit)/XP (64-bit)

  • <LabVIEW> is an alias for the following National Instruments file folder location:

    • LabVIEW 2009 SP1 (32-bit): <NIDIR>LabVIEW 2009

    • LabVIEW 2009 SP1 (64-bit): <NIDIR>LabVIEW 2009

    • LabVIEW 2010 SP1 (32-bit): <NIDIR>LabVIEW 2010

    • LabVIEW 2010 SP1 (64-bit): <NIDIR>LabVIEW 2010

    • LabVIEW 2011 SP1 (32-bit): <NIDIR>LabVIEW 2011

    • LabVIEW 2011 SP1 (64-bit): <NIDIR>LabVIEW 2011

    • LabVIEW 2012 SP1 (32-bit): <NIDIR>LabVIEW 2012

    • LabVIEW 2012 SP1 (64-bit): <NIDIR>LabVIEW 2012

File Locations

ItemInstalled Location
VIs<LabVIEW> i.libddonsModulation
Examples<LabVIEW>examplesModulation
Documentation<NIDIR>Modulation

Palettes

NI LabVIEW Modulation Toolkit palette VIs are available from the Functions»RF Communications»Modulation palette. NI LabVIEW Modulation Toolkit controls are available from the Controls»RF Communications»Modulation palette.

Documentation

Documentation is available at Start»All Programs»National Instruments»Modulation Toolkit»LabVIEW Support. The documentation set is composed of the following documents:

  • NI LabVIEW Modulation Toolkit Readme

  • NI LabVIEW Modulation Toolkit Help—HTML help format. Contains digital communication system fundamentals and LabVIEW reference sections.

Modulation Toolkit Updates and Notifications

National Instruments posts information about critical updates and security notifications on ni.com. Visit ni.com/info, and enter the info code updates to access this information.

Uninstalling/Modifying the NI LabVIEW Modulation Toolkit

Perform the following procedure to uninstall NI LabVIEW Modulation Toolkit 4.3.4:

For Windows XP, complete the following steps:

  • Launch the Control Panel by selecting Start»Control Panel.

  • Double-click Add or Remove Programs.

  • Select National Instruments Software.

  • Click Change/Remove.

  • Select NI LabVIEW Modulation Toolkit 4.3.4 from the dialog box that appears.

  • Click Remove to uninstall the product; click Modify to change the components that are installed.

For Windows 7/Vista, complete the following steps:

  • Launch the Control Panel by selecting Start»Control Panel.

  • Double-click Programs and Features.

  • Select National Instruments Software.

  • Click the Uninstall/Change button.

  • Select NI LabVIEW Modulation Toolkit 4.3.4 from the dialog box that appears.

  • Click Remove to uninstall the product; click Modify to change the components that are installed.

Note  Do not attempt to uninstall by manually deleting files.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI LabVIEW Modulation Toolkit 4.3, 4.3.1, 4.3.2, 4.3.3, and 4.3.4 Known Issues at ni.com for an up-to-date list of known issues in NI LabVIEW Modulation Toolkit 4.3.4.

Bug Fixes

The following items are changes in NI LabVIEW Modulation Toolkit 4.3.4 from NI LabVIEW Modulation Toolkit 4.3.3.

IDFixed Issue
362507Fixed an issue where installing NI LabVIEW Modulation Toolkit 4.3.3 did not install Digital Modulation Toolkit VIs on LabVIEW 2012.
374121Fixed an issue where NI LabVIEW Modulation Toolkit did not install on LabVIEW 2012.
404822Fixed an issue where multiple shortcuts to documents were present in the Start Menu folder for NI LabVIEW Modulation Toolkit.

The following items are changes in NI LabVIEW Modulation Toolkit 4.3.3 from NI LabVIEW Modulation Toolkit 4.3.2.

IDFixed Issue
322185Fixed an issue where some files were missing in the Modulation Toolkit after upgrading LabVIEW and reinstalling the toolkit for the upgraded version.
320449Fixed an issue where license manager was unable to check out Modulation Toolkit license from certain packages in a volume license file.

The following items are changes in NI LabVIEW Modulation Toolkit 4.3.2 from NI LabVIEW Modulation Toolkit 4.3.1.

IDFixed Issue
294171Fixed an issue where an error message about conflicts between different dir.mnu is displayed when opening a VI from a LabVIEW project that has Modulation Toolkit dependencies.

The following items are changes in NI LabVIEW Modulation Toolkit 4.3.1 from NI LabVIEW Modulation Toolkit 4.3.

IDFixed Issue
294170Fixed an issue where LabVIEW projects that have Modulation Toolkit dependencies take a long time to load.
294916Fixed an issue where an error message is displayed while compiling a project that refers to mod_Symbols to Bits.vi.
298309Fixed an issue where analog modulation VIs are not installed on upgrading from MT 4.1 to 4.3.1.
293100Fixed an issue where Modulation Toolkit does not install properly on LabVIEW versions after 2010 SP1.

The following items are changes in NI LabVIEW Modulation Toolkit 4.3 from NI LabVIEW Modulation Toolkit 4.2.1.

IDFixed Issue
147127Fixed an issue where the offsets seem to be off by one sample in the MT Phase Noise example.
176993Fixed an issue where the sideband rejection in AM-SSB is correlated to the sample rate of the message signal, and cannot be reduced below a certain dB level.
223422Fixed an issue where the Gaussian pulse does not integrate to unity.
233207Fixed an issue in FSK modulation, where the pulse shape filter rampup that needs to be deleted must be equal to the length of the filter.
239324Fixed an issue where the search (+/- % of Fsampl) parameter of the pilot extraction filter cluster is used incorrectly during AM-SSB and AM-VSB demodulation.
244292Fixed an issue where the constellation trace shows ghost points when a BPSK symbol is defined in PSK simulation.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

  • For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.

  • For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.

  • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.


Important Information

Copyright

© 2005–2013 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

  • Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

  • EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

  • Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

首页
84162741QQ
联系