LabVIEW Modulation Toolkit 4.3.1 Win32/64Eng LabVIEW调制工具包4.3.1

LabVIEW调制工具包
LabVIEW调制工具包为LabVIEW提供了调制信号生成和分析功能，适用于研究、设计、原型，验证和测试应用。
LabVIEW调制工具包是LabVIEW的一个软件附件，提供了用于生成、分析、处理和可视化模拟和数字调制信号的功能和工具。该工具包可让您使用各种调制方案（包括AM、FM、PM、ASK、FSK、MSK、PSK和QAM）对信号进行调制和解调。使用LabVIEW调制工具包，您可以执行信道编码、交织编码和均衡等等高级信号处理，也可以测量频率误差、误差矢量幅度(EVM)和误码率(BER)等参数，以验证信号质量。使用LabVIEW调制工具包，您还可以应用常见的信号减损，并通过星座图、眼图和网格图等可视化工具查看信号。

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://labviewvision.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://labviewvision.com/thread-26524-1-1.html

发布日期：2011/06/02
包含的版本：4.3.1
受支持的操作系统
Windows 7 (32-bit)
Windows 7 (64-bit)
Windows Vista (32-bit)
Windows Vista (64-bit)
Windows XP
Windows Server 2003 (32-bit)
Windows Server 2008 (32-bit)
语言：English
应用程序位数：32/64位
校验和：
文件大小: 435905327 字节 (415.71 MB)
修改日期: 2022-03-25 06:09
MD5: 186e7de720fe25a940b82e9b408f56ec（秒传）
SHA1: 77ee508ba55bcb53285b32faaabbd29d9beb88a8
SHA256: fec927c79abf128c03a76ac11aee4880e716af4aeb34827091921cd0b7b53e58
CRC32: 01dabc54

百度网盘和NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址
[attach]17514[/attach]

NI LabVIEW Modulation Toolkit Readme

Version 4.3

Thank you for using the NI LabVIEW Modulation Toolkit (MT). This file contains important information about this release and is organized into the following sections:

• New Features

• Supported Hardware

• System Requirements

• Licensing

• Supported Drivers

• Installed File Locations

• Palettes

• Examples

• Documentation

• Uninstalling/Modifying the Modulation Toolkit

• Known Issues

• Bug Fixes
  

New FeaturesNI LabVIEW Modulation Toolkit 4.3 includes the following new features:

• Support for Windows Vista (64-bit) and Windows 7 (64-bit) operating systems.

• Support for MLSE demapper for CPM and MSK.

• Support for non-systematic encoder-decoder for BCH and Hamming codes.

• Support for clock frequency offset estimation and correction for FSK, PSK, and QAM.

• Support for palette level function for autoconfiguring and performing CCDF measurement.
  

NI LabVIEW Modulation Toolkit 4.2 includes the following new feature:

Japanese localization for LabVIEW application programming interface (API) and documentation.

NI LabVIEW Modulation Toolkit 4.1 includes the following new features:

• Support for LabVIEW Real-Time Module 8.5 or later (on PXI systems).

• New bit recovery VIs for the following modulation schemes: ASK, FSK, MSK, PSK, QAM, PAM, and CPM.

• Addition of new polymorphic instances to the MT Downconvert Passband and MT Upconvert Baseband VIs to support complex I/Q data.

• Optimized versions of the following existing VIs:
  
  

• MT Modulate FM

• MT Resample (Complex Cluster)

• MT Pack Bits

• MT UnPack Bits

• MT Apply IQ Impairments

• MT Measure Quadrature Impairments

• MT Generate Fading Profile

• MT Apply Fading Profile

• MT Modulate ASK

• MT Modulate FSK

• MT Modulate PSK

• MT Modulate MSK

• MT Modulate QAM

• MT Modulate PAM

• MT Modulate CPM
  

Supported HardwareVector Signal Generators

• NI PXI-5670

• NI PXI-5671

• NI PXIe-5672

• NI PXIe-5673

• NI PXIe-5673E
  

Arbitrary Waveform Generators

• NI PXIe-5442

• NI PXIe-5450

• NI PXIe-5451
  

Vector Signal Analyzers

• NI PXI-5660

• NI PXI-5661

• NI PXIe-5663

• NI PXIe-5663E

• NI PXIe-5665
  

Digitizers

• NI PXI-5621

• NI PXI-5620

• NI PXI-5122

• NI PXI-5124

• NI PCI-5122

• NI PCI-5124

• NI PXI-5922

• NI PXI-5142

• NI PXIe-5122

• NI PXIe-5622
  

System Requirements

This section lists the minimum system requirements and the recommended system for using this toolkit.

Minimum System

Before installing the NI Modulation Toolkit software, verify that your system meets the following requirements:

• Windows 7 (32-bit)/Windows 7 (64-bit)/Windows Vista (32-bit)/Windows Vista (64-bit)/Windows XP/Windows Server 2003 (32-bit)/Windows Server 2008 (32-bit), with all available critical updates and service packs

• 1 GB of free hard drive space

• 256 MB of RAM

• NI LabVIEW 8.6.1, 2009 SP1 (32-bit), 2009 SP1 (64-bit), 2010 (32-bit), or 2010 (64-bit), Full Development System or Professional Development System
  

Recommended System
For optimum performance with large waveforms, NI recommends that your system meets the following requirements:

• 4 GB of free hard drive space

• 1 GB of RAM
  

Licensing

For details on activating NI Modulation Toolkit, refer to the Activating Your Software section in the help files. The evaluation mode for the NI Modulation Toolkit is 30 days from the date of installation. You can access all the features of the toolkit in the evaluation mode. Refer to the software license file for further licensing requirements.

Supported Drivers

Install all instrument drivers for the hardware you intend to use before installing the Modulation Toolkit. The toolkit supports the following drivers:

• NI-RFSA 2.1 or later

• NI-SCOPE 3.4 or later

• NI-RFSG 1.4 or later

• NI-FGEN 2.5.1 or later
  

If you install one or more of the aforementioned drivers after installing NI Modulation Toolkit 4.3, driver-specific toolkit examples and palette VIs are not present. To install these driver-specific files, you can run the "Modify" function from the Modulation Toolkit installer. To do so, follow the instructions found in the Uninstalling/Modifying the Modulation Toolkit section.

Installed File Locations

Verify that LabVIEW and any supported drivers you intend to use with the toolkit are installed on your system prior to installing the toolkit. Install the toolkit by inserting the toolkit CD into your drive and clicking setup.exe.

Palettes

Modulation Toolkit palette VIs are available from the Functions»RF Communications»Modulation palette. Modulation Toolkit controls are available from the Controls»RF Communications»Modulation palette.

Examples

With LabVIEW running, select Help»Find Examples to launch the NI Example Finder. The NI Example Finder offers two ways to access all installed LabVIEW example VIs (including Modulation Toolkit examples) and their descriptions.

• Click the Browse tab to locate modulation examples by task at Toolkits and Modules»Modulation or by directory structure at Modulation.

• Click the Search tab to search all installed examples by keyword. Enter the keyword FM, for instance, to locate an example demonstrating FM signal generation using an NI RF signal generator and the Modulation Toolkit.
  

Documentation

The product documentation is available at Start»All Programs»National Instruments»Modulation»LabVIEW Support. Visit ni.com/manuals for the latest versions of product documentation. The documentation for the Modulation Toolkit includes the following items:

• NI LabVIEW Modulation Toolkit Help

• NI LabVIEW Modulation Toolkit Readme (this document)
  

Uninstalling/Modifying the Modulation Toolkit

For Windows XP, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.

• Double-click Add or Remove Programs.

• Select National Instruments Software.

• Click Change/Remove.

• Select NI LabVIEW Modulation Toolkit 4.3 from the dialog box that appears.

• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

For Windows Vista or Windows 7, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.

• Double-click Programs and Features.

• Select National Instruments Software.

• Click the Uninstall/Change button.

• Select NI LabVIEW Modulation Toolkit 4.3 from the dialog box that appears.

• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

Known Issues

You can access the software and documentation known issues list online. Refer to the NI Modulation Toolkit 4.3 Known Issues List web page on the National Instruments Web site for an up-to-date list of known issues in NI Modulation Toolkit 4.3.

Bug Fixes

The following issues were fixed between Modulation Toolkit 4.2.1 and Modulation Toolkit 4.3.

The following issue was fixed between Modulation Toolkit 4.2 and Modulation Toolkit 4.2.1.

The following issue was fixed between Modulation Toolkit 4.1 and Modulation Toolkit 4.2.

Copyright

©2005—2011 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

Trademarks

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.

Patents

For patents covering the National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents.

• 上篇：NI Spectral Measurements Toolkit Win32/64Eng NI频谱测量工具包历年版本下载SMT2.6~17.0
• 下篇：LabVIEW Modulation Toolkit 4.3.2 Win32/64Eng LabVIEW调制工具包4.3.2
• 标签：LabVIEW调制工具包4.3.1LabVIEW 4.3.1NIMODTLV4.3.1LabVIEW Real-Time ModuleMT Modulate