NI-FieldPoint 6.0.11 Win32/64Eng NI Compact FieldPoint可编程自动化控制器驱动程序6.0.11

NI-FieldPoint
NI-FieldPoint为Compact FieldPoint可编程自动化控制器提供LabVIEW支持。
NI-FieldPoint是一款驱动软件，可通过LabVIEW和LabVIEW Real-Time模块创建Compact FieldPoint应用程序和实时任务。LabVIEW可搭配NI-FieldPoint使用，为Compact FieldPoint库中的本地或分布式I/O自动创建FieldPoint I/O标签和读取/写入函数。您还可以使用LabVIEW中的共享变量，将I/O数据自动发布至网络。

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://labviewvision.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://labviewvision.com/thread-26524-1-1.html

NI-FieldPoint 6.0.11
发布日期：2012/2/29
包含的版本：6.0.11完整版
受支持的操作系统
Windows XP 32-bit
Windows Vista
Windows 7
语言：English
应用程序位数：32/64位
校验和：
文件大小: 914481288 字节 (872.12 MB)
修改日期: 2022-03-25 22:42
MD5: aea7270eadb57d4ea8a2a5a836edf496
SHA1: 32b48f5f35e154ec907781f684dfa2406da4c564
SHA256: 0803e2834cfcb46cbc8659445d2d3a22a1e0bf74e7accaf12f9c97aa736ac6e2
CRC32: 82314319

百度网盘和NI官方下载地址：
请注册登陆视觉论坛账号，购买附件查看下载地址

NI-FieldPoint 6.0.11 Win32/64Eng NI Compact FieldPoint可编程自动化控制器驱动程序6.0.11

http://labviewvision.com/thread-29745-1-1.html?fromuid=9

(出处: 机器视觉论坛)

National Instruments FieldPoint™ 6.0.11 Readme

© 2012 National Instruments Corporation. All rights reserved.

CVI™, FieldPoint™, LabVIEW™, National Instruments™, and ni.com™ are trademarks of National Instruments Corporation.

Product and company names mentioned herein are trademarks or trade names of their respective companies.

This document contains important information about using the FieldPoint software with National Instruments application development environments. Please read this document completely before using the FieldPoint software.

Supported Operating Systems

You can run the FieldPoint installer on the following operating systems:

• Windows 7 (32-bit and 64-bit*)

• Windows Vista (32-bit and 64-bit*)

• Windows XP SP2(32-bit)

• Windows Server 2003 R2 (32-bit)

• Windows Server 2008 R2 (64-bit*)
  

The FieldPoint installer does not support Windows 2000/NT/Me/98/95 or the Windows Server non-R2 editions.

Operating system versions marked with an asterisk (*) will run within the 32-bit emulation layer, Windows on Windows (WOW64).

New in FieldPoint 6.0.11Support for LabVIEW 2012FieldPoint 6.0.11 Bug Fixes

The following items are changes from FieldPoint 6.0.10 to FieldPoint 6.0.11

[tr][/tr]

Known Issues in FieldPoint 6.0.11cFP-180x User LED Is Inaccessible through Serial Port

The cFP-180x User LED channel is accessible only through an Ethernet connection. You cannot read or control the User LED through a serial connection.

Remote I/O Error Reporting May Not Match Host VI Error Reporting

A VI running embedded on an RT controller may report errors for remote I/O that do not match the errors reported by the same VI running on a host computer. For example, if an AI channel is out of range, an FP Read running on a host computer reports an Out of Range error. The same VI running on an RT controller returns channel-specific error A or B. Refer to the Attributes, Ranges, and Commands topic of the FieldPoint LabVIEW Interface Help for information about error messages (channel status). Doing remote I/O over serial may result in an Unknown Tag error (32812) if initialization with the module fails.

Upgrading FieldPoint RT Controllers to LabVIEW Real-Time Module 2009 SP1, 2010 SP1, 2011 SP1 and 2012

The cFP-22xx controllers require LabVIEW Real-Time Module 8.5.1 or later. The cFP-21xx controllers require LabVIEW Real-Time Module 8.0 or later. National Instruments recommends LabVIEW Real-Time Module 7.1.1 for use on the [c]FP-20xx controllers. The [c]FP-20xx controllers do not support LabVIEW Real-Time Module 8.6 or later. Some features of LabVIEW Real-Time Module 8.x require more than 16 MB RAM, and the [c]FP-2000 and some other [c]FP-20xx controllers have only 16 MB RAM. Use the Remote Systems Install Software Wizard in MAX to install LabVIEW and FieldPoint software on FieldPoint controllers. For more information about memory and storage requirements of different LabVIEW versions, go to ni.com/info and enter the Info Code rdlrmf.

LabVIEW Real-Time and FieldPoint Software on FieldPoint RT Controllers

For information about which versions of the LabVIEW Real-Time Module and FieldPoint software components on the FieldPoint RT controller are compatible with each other, go to ni.com/info and enter the Info Code fpswlist.

MiscellaneousNI-FieldPoint 6.0.X supports the following LabVIEW Versions:

This table shows only major versions but includes all maintenance releases.

FieldPoint IAK Configuration File Included in Application

With FieldPoint 6.0.2 or later, you can include FieldPoint configuration files in the data directory of a LabVIEW application. Check Include hardware configuration files on the Advanced tab in Application Properties to use this feature. The built application will use the IAK configuration file in the data directory instead of the IAK file registered with the system.

Which IAK file LabVIEW uses for a VI depends on the type of VI, whether or not the VI is part of a LabVIEW project, and whether or not the VI has been built into an executable. The table below describes which IAK file is used in each case.

Support for Measurement & Automation Explorer (MAX) 4.5 or later to Delete Disconnected Remote Systems

To delete a disconnected remote system, right-click Remote Systems in MAX and select Delete Disconnected Systems. Offline FieldPoint systems with saved configurations will not be deleted.

Creating a FieldPoint Distribution Kit

If you are deploying a FieldPoint executable built with LabVIEW 8.0 or later, you can include FieldPoint 5.0 or a later version in the installer. You also must copy the .iak file associated with the project to your application.

To create a FieldPoint executable using LabWindows/CVI, you must include FPCVIMgr.DLL in the distribution kit. By default this file is installed in the WINNTsystem32 folder for Windows 7/VISTA/XP.

The .iak file created in MAX also must be included with the FieldPoint distribution kit.

FieldPoint OPC Server

The latest FieldPoint OPC server supports version 2.04 of the OPC Interface Specifications.

NOTE: The return value for tags of type VT_BOOL has changed from +1 to -1 (0xFFFF - VARIANT_TRUE) to comply with the OPC specifications. All discrete input and output items (except the "All" item) for FieldPoint channels are defined to be of type VT_BOOL. If you have an OPC application that checks for data values strictly equal to +1 for discrete items, change it to check for -1 or for a non-zero value (recommended).

• 上篇：NI-FieldPoint 6.0.10 Win32/64Eng NI Compact FieldPoint可编程自动化控制器驱动程序6.0.10
• 下篇：NI-FieldPoint 6.1.0 Win32/64Eng NI Compact FieldPoint可编程自动化控制器驱动程序6.1.0
• 标签：NI-FieldPoint 6.0.11Compact FieldPoint6.0.11NI可编程自动化控制器驱动程序6.0.11LabVIEW Real-TimeLabVIEW实时