石鑫华视觉
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://labviewvision.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://labviewvision.com/thread-26524-1-1.html
NI-488.2 2022 Q4 Driver Online Download Linux64Eng NI IEEE488.2仪器驱动22.8在线版下载
NI-488.2为使用NI GPIB控制器和带有GPIB端口的NI嵌入式控制器的客户提供支持。
NI-488.2仪器驱动程序包含了几个实用程序，用于应用程序开发和调试。NI-488.2包含了可自动处理所有总线管理的高级命令，因而用户就无需了解GPIB硬件产品或IEEE 488.2协议的编程细节。为了提供最大灵活性和功能，NI-488.2还包含了底层命令。
20.0版自述文件有中文版的，官方说明中也说支持中文, 日语, 英文, 韩语等，但是翻看资源包的Documents目录下，只有英文和日文的，估计仍然是只有安装界面与自述文件有中文，内在的资源仍然是没有中文化的。
NI-488.2 2022Q4
发布日期：2022/10/14
包含的版本：22.8.0完整版
受支持的操作系统:
RedHat
SUSE
Ubuntu
语言：English
校验和:
文件大小: 408542 字节 (398.97 KB)
修改日期: 2022-10-15 09:49
MD5: f3914fd71ace97a8cb399e5c9b127b6e
SHA1: 02cae55c43769c5e03810c58c79ff24a38798a69
SHA256: bddf9878db0c3bcf1b6d67d9f84bcf4a6ce744b48cc138183281962715efd39e
CRC32: a0611b43
百度网盘下载：
请注册视觉论坛会员，购买附件查看下载地址
NI-488.2 2022 Q4 Driver Online Download Linux64Eng NI IEEE488.2仪器驱动22.8在线版下载
http://labviewvision.com/thread-29590-1-1.html?fromuid=9
(出处: 机器视觉论坛)
NI-488.2 2022 Q4 for Linux/x86 64-bit Architecture Readme
October 2022
This file contains installation instructions and compatibility information for NI-488.2 2022 Q4.
You can find more release information on ni.com.
NI-488.2 Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
NI-488.2 Documentation: New features, behavior changes, and other documentation
System Requirements
Supported Hardware
Installation Instructions
Device Configuration
Finding Examples
Accessing the Documentation
Linux Limitations
FAQs
Linux Limitations
Legal Information
System Requirements
NI-488.2 for Linux software for the Linux/x86 64-bit architecture has been tested on the following distributions:
openSUSE Leap 15.4
openSUSE Leap 15.3
Red Hat Enterprise Linux 9
Red Hat Enterprise Linux 8
Ubuntu 22.04
Ubuntu 20.04
NI-488.2 for Linux requires a 64-bit distribution and does not support 32-bit applications.
Supported Hardware
Visit NI Hardware and Operating System Compatibility to view driver, desktop operating system, and real-time operating system support for individual hardware devices.
To view information for your device:
Select your hardware model in the dropdown list on the page to view compatibility information for your device.
Type your hardware model number in the dropdown list on the web page to filter the list of available devices.
Note: Some compatibility information may only be available in the archive attached to the NI Hardware and Operating System Compatibility page. For historic driver and OS support information, refer to the readme for the relevant driver version.
Installation Instructions
NI provides a repository add-on for all supported drivers that you can install using your Linux distribution's native package manager.
For detailed instructions, refer to Download and Install NI Driver Software on Linux Desktop on ni.com.
Download the installer for the repository add-on for your Linux distribution.
Install the repository add-on using the rpm command.
Select and install the following NI-488.2 for Linux driver package through your Linux distribution's package manager:
ni-488.2
libni4882-devel (optional, C and C++ support)
ni-488.2-iotrace-support (optional, NI IO Trace support)
After the driver package(s) are installed, you must rebuild the new packages for the system kernel. NI recommends that you run the command 'dkms autoinstall' after installation, and before rebooting the system, to install the latest revision of all modules that have been installed for other kernel revisions. After doing so, the installed device drivers will function immediately on the next system start.
Description of Utilities
| gpibexplorer | GPIB Explorer is used to browse, configure, add, and delete GPIB interfaces. |
| gpibtsw | GPIB Troubleshooting Wizard is used to verify your hardware and software installation. |
| gpibintctrl | GPIB Interactive Control is used to communicate with GPIB devices interactively. |
C/C++ Language Interface
| ni4882.h | NI-488.2 header file |
| libni4882.so | Dynamic library |
| libni4882.a | Object file that allows explicit loading of libni4882.so |
Device Configuration
To configure a supported GPIB interface, refer to the Installation Guide located in /usr/share/doc/ni-488.2-documentation.
Finding Examples
To have the ni4882 library loaded explicitly when the program makes the first call into the library:
gcc prog.c libni4882.a -ldl
g++ prog.cpp libni4882.a -ldl
For more NI-488.2 API use examples, refer to /usr/share/ni4882/examples/README.
Accessing the Documentation
You can access NI-488.2 Help from GPIB Explorer.
Linux Limitations
Some features discussed in the NI-488.2 for Linux documentation are unavailable on Linux.
NI-488.2 supports the two application development environments:
LabVIEW 2019, LabVIEW 2020, and LabVIEW 2021
C and C++ (gcc)
NI-488.2 for Linux does not support 32-bit LabVIEW, LabVIEW Real-Time Module, or LabWindows/CVI ADEs.NI-488.2 for Linux supports the NI-VISA APINI-488.2 does not provide the Measurement and Automation Explorer (MAX) graphical configuration utility that is available for other operating systems. To configure a supported GPIB interface, refer to the Installation Guide located in /usr/share/doc/ni-488.2-documentation.NI-488.2 software for Linux does not support power management. You must disable the power management settings or make sure all GPIB handles are offline before the system enters the power management modes.NI-488.2 software for Linux does not work with the fork() system call. Specifically, the interface and device handles opened by the parent process are not properly inherited by the child process. Any attempt to use already opened handles in the child process will result in a Segmentation Fault for the child process. A workaround is either to open a new interface/device handle in the child process or to use threads instead of processes to implement multitasking. Linux provides a POSIX-compliant thread library called pthreads.FAQs
Q1: When I try to open Help from GPIB Explorer, I am prompted for my default web browser. What does this do?
A1: This problem only occurs on systems where htmlview is not installed. Each user's response to this dialog box is stored in ~/natinst/.lvbrowser (where ~ is the user's home directory). If you need to change this response, you can edit this file or just delete it so that you will be prompted again when entering help.
Q2: Why can't I discover a GPIB-ENET/1000 device in GPIB Explorer?
A2: It is likely that your firewall is blocking the discovery of the device. You can get around this by disabling the firewall during discovery. This can be reverted after you have added the device.
Q3: Launching gpibintctrl through GPIB Explorer causes the text utility to launch twice in different terminals.
A3: This problem is due to a bug (#646317 bugzilla) in gnome-terminal (2.32.1-6.1). This causes GPIB Explorer to believe that gnome-terminal has failed to launch, so it re-launches the utility in another terminal. You can either close the duplicated window or update gnome-terminal to version 3.2.1 or above.
Legal Information
Copyright
© 2007–2022 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the /usr/share/doc/ni-488.2/NOTICES directory.
EULAs are located in the /usr/share/ni/licenses directory.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the NI Patent Notice at ni.com/patents.