Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活,以下链接可下载:
NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI RFmx TD-SCDMA 19.0 Runtime Win64ENG RFmx蜂窝测试TD-SCDMA19.0运行版-32位
RFmx TD-SCDMA
RFmx TD-SCDMA为TD-SCDMA蜂窝测试应用提供信号生成和分析功能。
RFmx TD-SCDMA是一款测量专用软件,旨在扩展NI RF仪器生成和分析TD-SCDMA蜂窝信号的能力。该软件可以通过误差矢量幅度(EVM)、码域误差(CDE)、发射开/关功率(PVT)、相邻信道泄漏比(ACLR)、频谱发射屏蔽(SEM)等符合标准的物理层测量,对TD-SCDMA上行链路信号进行分析。借助RFmx,您可通过交互式软面板快速轻松地执行和调试测量,使用RFmx Waveform Creator创建和回放开放的未锁定波形,并结合更高性能的API加快自动化测试的速度。
发布日期:
2019/6/27
包含的版本:
19.0运行版
受支持的操作系统:
Windows 10 64-bit
Windows Server 2012 R2 64-bit
Windows 7 (SP1) 64-bit
Windows Server 2008 R2 (SP1) 64-bit
Windows 8.1 64-bit
语言:
英文
应用程序位数:
32位
校验和:
百度网盘和NI官方下载地址:
注册登陆视觉论坛用户,购买附件查看下载地址
NI RFmx TD-SCDMA 19.0 Runtime Win64ENG RFmx蜂窝测试TD-SCDMA19.0运行版-32位
http://pcmv.cn/thread-28475-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
RFmx TD-SCDMA 19.0 Readme
Overview
New Features
Support for LabVIEW 2019 (32-bit and 64-bit)
Support for De-embedding S-Parameter External Attenuation Tables
Addition of Reference Level Headroom property
Addition of RFmx TD-SCDMA Soft Front Panel (SFP 64-bit) with debug support
Support for NI PXIe-5820
Support for self-calibration in the RFmx Soft Front Panel
Addition of APIs to perform self-calibration and partial self-calibration
Addition of RFmx Debug Configuration Utility to configure debug settings
Support for LabVIEW 2018 (32-bit and 64-bit)
Support for querying configuration attributes without calling RFmxTDSCDMA Commit API
Addition of Slot Power measurement
Addition of Subframe Synchronization Mode in the ModAcc measurement
Addition of functions to query signal configuration names and result names
Addition of a sequential FFT measurement method in the ACP measurement
Support for UpPTS in ModAcc measurement
Support for LabVIEW 2017 (32-bit and 64-bit)
Support for frequency-dependent external attenuation tables
Support for frequency-dependent amplitude correction on measured power spectrum data
Support for monitoring API calls in the NI IO Trace
Supported Hardware
Vector Signal Analyzers
PXIe-5663
PXIe-5663E
PXIe-5665
PXIe-5668
PXIe-5668 with PXIe-5698
Vector Signal Transceivers
PXIe-5644
PXIe-5645
PXIe-5646
PXIe-5840
PXIe-5820
System Requirements
Processor—1 GHz 64-bit (x64) processor
4 GB RAM*
A screen resolution of 1,024 x 768
Windows 10/8.1/7, with all available critical updates and service packs
Supported Operating Systems
Windows 10/8.11/7 SP12
Windows Server 2012 R21
Windows Server 2008 R2 SP12
Application Software Support
[tr][/tr]
Application Software | Versions Supported by RFmx TD-CDMA |
LabVIEW | 2016, 2017, 2018 SP1 f4 patch, or 2019 |
Other Required Software
NI-RFSA 14.1 or later
Microsoft Visual Studio Support
Installation Instructions
Installed SoftwareInstalled Software
<NIDocDir> is an alias for the following National Instruments file folder location: UsersPublicPublic DocumentsNational Instruments
<MSTUDIOVS2010DIR> is an alias for the following National Instruments file folder location:
Program Files (x86)National InstrumentsMeasurementStudioVS2010
<NIDir> is an alias for the following National Instruments file folder location:
Program Files (x86)National Instruments
<SYSDIR> is an alias for the following file folder location:
File Locations
Item | Installed Location |
Version Compatibility Checker | <NIDir>RFmx iRFmxCompatibility_Checker.exe |
Debug Configuration Utility | <NIDir>RFmx iRFmxDebugConfigurationUtility.exe |
DLLs | <SYSDIR> |
Header files | <NIDir>SharedExternalCompilerSupportCinclude |
Import Library files (32-bit) | <NIDir>SharedExternalCompilerSupportCinclude |
Import Library files (64-bit) | |
C, .NET | |
Examples | <NIDocDir>NI-RFmxTDSCDMAExamples |
LabVIEW | |
Examples | <NIDir>LabVIEW <version>examplesRFmxTDSCDMA |
.NET Class Libraries | |
Assemblies | <MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.TdscdmaMX.Fx40.dll <MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.InstrMX.Fx40.dll <MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.Common.dll |
Executable
Finding Examples
Accessing the Documentation
Document | Format | Description |
RFmx TD-SCDMA Help | HTML/Windows Help | Information about RFmx TD-SCDMA. This help file is an HTML version of a traditional user manual that includes the following information: |
RFmx TD-SCDMA 19.0 Readme | HTML (this document) | Information about supported hardware and operating systems, new features, fixed issues, and legal notices. |
Accessing VIs
Product Security and Critical Updates
Behavior Changes
Bug Fixes
ID | Fixed Issue |
706047 | Fixed an occasional crash which might occur on closing LabVIEW 2017 IDE or LabVIEW 2017 built applications that use RFmx. |
719203 | Fixed an issue where a timeout error was thrown when the digital trigger was configured when Using breakpoints in C/C++/.NET application was selected in the NI-PXIe-5840. |
ID | Fixed Issue |
640495 | Fixed an issue where switching between measurements from an RFmx cellular personality to Demod resulted in higher EVM on 5668R. |
ID | Fixed Issue |
650095 | Fixed an issue where the RFmxInstr Close API did not abort a measurement in progress, but instead waited for the measurement to finish before closing. |
650083 | Fixed an issue with RFmxInstr Save All Configurations API to save the attribute configurations depending on the corresponding number of channels configured by user. |
648703 | Fixed an issue where passing NULL as selector string in a few C functions, caused the function to crash. |
ID | Fixed Issue |
631432 | Fixed an issue where incorrect values were returned on reading RF Attenuation and Mechanical Attenuation properties. |
641151 | Fixed an issue with configuring the following properties: |
636356 | [ModAcc] Fixed an issue for User Defined channel configuration mode, to allow any number of user defined channels. |
608056 | [ModAcc] Fixed an issue so that the trace lengths during Averaging On or Off are the same. |
642156 | [ModAcc] Fixed issues with the length and values of Code Domain Error Trace and Maximum Code Domain Error Trace |
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
RFmx TD-SCDMA Drops Support for Windows 7 (64-Bit) and Windows Server 2008 R2 in 2021
Product | Info Code |
LabVIEW | lifecycle |
LabWindows/CVI | cvi_lifecycle |
Measurement Studio | mstudiolifecycle |
TestStand | tslcp |
DIAdem | ddlcp |
SignalExpress | selcp |
VeriStand | nivslifecycle |
Legal Information
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
For more information about silent installations of individual NI products, refer to Customize and Automate Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to Customize and Automate Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to Determine Type and Version of My National Instruments Installer.
UL Scrambling Code property and Midamble properties in ModAcc, CDA, and PVT measurements with a named signal.
User Defined Channel properties in ModAcc and CDA measurements with a named signal.
The alias 'default@TDSCDMA' for the default signal name is accepted as a valid signal name in a selector string parameter
LabVIEW built binaries using RFmx versions older than 2.2 are no longer supported
Dropped support for RFmx TD-SCDMA Measurement Interactive Panel
Dropped support for LabVIEW 2015
Deprecated the Recommended I/Q Measurement Bandwidth property in RFInstr
An introduction to RFmx TD-SCDMA
How to get started with application development
A complete reference for all RFmx TD-SCDMA programming functions and VIs
32-bit: <NIDir>SharedExternalCompilerSupportClib32msvc
64-bit: <NIDir>SharedExternalCompilerSupportClib64msvc
WindowsSysWOW64 for 32-bit programs and windowssystem32 for 64-bit programs