Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html
NI Data Management Software Suite 2018 SP1 Win64Eng NI数据管理软件套件2018SP1
Data Management Software Suite数据管理软件套件
数据管理软件套件可帮助您查找、分析和报告测量数据。
数据管理软件套件包含DIAdem、TDM Server和NI批量许可证管理器。该套件为用户提供了完整的解决方案,使其可构建自动化解决方案来查找、分析和报告大量测量数据。TDM Server包含DataFinder、数据与处理器,Analysis Server和数据导航。
本套餐还有2018、2017SP1、2017版本,但是视觉论坛没有相应的资源,如有需要,请尝试从SPB软件平台套件中查找安装。
发布日期:
2019/2/4
包含的版本:
2018SP1专业版
受支持的操作系统:
Windows Server 2016
Windows Server 2008 R2 (SP1) 64-bit
Windows Server 2012 R2 64-bit
语言:
English
应用程序位数:
64位
校验和:
文件大小: 1836822408 字节 (1.71 GB)
修改日期: 2022-03-25 09:37
MD5: 3ed6e9bbf5e65301556bbd18baa510eb(官方正确)
SHA1: b65df4e29223a0dc45236e4f1ed04ddafe6ff873
SHA256: a2e0c9f5ecbed8a7706583c81fb4e40d135c35f3dde33449d1c30531a6a1695e
SHA512: ca34ecd767eb1e071344ea9447146758be2cb993376d1ce14ef6da8a41d1208f62e4cd630d75c01b674bd8a175e9dbcbeddb599a353c9bb66607cab365d3571f
百度网盘和NI官方下载地址:
注册登陆视觉论坛账号,购买附件查看下载地址
NI Data Management Software Suite 2018 SP1 Win64Eng NI数据管理软件套件2018SP1
http://pcmv.cn/thread-29141-1-1.html?fromuid=9
(出处: 机器视觉论坛)
DIAdem 2018 SP1 Release Notes
Overview
System Requirements
Hardware
CPU | x64 compatible processor, 1.6 GHz or more |
Amount of memory | 2 GB or more |
Hard disk memory | Depending on the operating system, up to 3 GB free storage space, of which at least 2 GB are on the system partition |
Video card | Color depth at least 16-bit (High Color), 24-bit, or 32-bit (True Color) recommended |
Screen resolution | From 1024x768 with a 100% scaling step |
Supported Operating Systems
Note National Instruments recommends the use of the NI Analysis Server for the automatic evaluation on server operating systems instead of DIAdem. |
Note DIAdem runs only with restrictions on the N or KN edition of Windows because the multimedia support is missing. You can obtain this as "Media Feature Pack" from Microsoft and install it later. Under Windows Server 2012 R2 you cannot play videos in DIAdem VIEW. |
Administration
Firewall | The firewall displays warnings while DIAdem installs and while DIAdem launches, for the following reasons: The usireg component executes during the installation of DataPlugins. The DataFinder, which you use for searching and navigating in files, then starts. When DIAdem launches, a DNS query determines whether to license locally or whether to use a license server. If you want to be able to use all the DIAdem functions, National Instruments recommends that you select "Do not block" for all programs listed. This also applies when you want to evaluate DIAdem. Refer to ni.com/info under the info code winxpsp2 for more information. |
Windows User Permissions | DIAdem and its components are basically executable under the pre-configured Microsoft Windows user accounts from User upwards. DIAdem must be installed with complete administrator permissions. If you operate various DIAdem versions on one computer, you only have the entire range of functions in each version if you have administrator permissions. |
Miscellaneous
Internet Explorer: For the map display in DIAdem VIEW and DIAdem DAC, you need Internet Explorer version 11 or later.
Notes on DIAdem 2018
As of Version 2018, DIAdem offers a much higher resolution for time channels. By default this higher resolution is disabled but can be enabled in the DIAdem settings. The higher resolution has the following effects:
- If you change the time resolution or the time format string, you must save the desktop file and restart DIAdem. Otherwise, there may be problems with the display or processing of time values.
- DIAdem uses a different time base for the higher time resolution. The time base for version 2018 is 01/01/2018 00:00:00. The time base is adapted to each version. In version 2019, for example, the time base will be 01/01/2019 00:00:00.
- When converting vbTime time value types into other DIAdem time formats, DIAdem always uses the date of the current time base to determine a date/time value.
- When high time resolution is enabled, the vbDate resolution is not sufficient to process resolutions smaller than 1 ms. For processing high resolution time values, use the dValues or oValue properties instead.
- When high time resolution is enabled, DIAdem expands implicit time channels when saving the data as a TDM file.
- When high time resolution is enabled, the stored TDM files are larger than when high time resolution is not enabled.
- When high time resolution is activated, DIAdem does not register time channels, but loads the mass data immediately.
- DIAdem currently supports high time resolution only for time channels from TDM or TDMS files or for newly created time channels.
As of DIAdem 2018, you can no longer connect to My DataFinder from a remote computer.
If you switch off Data Portal refresh during debugging using the UIAutoRefreshSet command, errors can occur because the Data Portal does not always display the actual data.
DIAdem Version 9.0 and LabVIEW Version 7.1, and later versions, use a shared software component that is updated when you install DIAdem. When you uninstall DIAdem, the current version of the shared component remains. This is intentional and has been tested extensively.
The installation functions were tested parallel to earlier DIAdem versions down to DIAdem 2014.
For the MyDataFinder in DIAdem 2018, any index files from earlier DIAdem versions must be regenerated. This occurs automatically when you launch DIAdem. Depending on how many files are to be indexed, this may take quite some time.
It is strongly recommended that you install in the suggested folders, or that you specify the folder exclusively in the path selection dialog box in the setup program. In particular, changing the suggested program path manually in the installation program can cause problems in DIAdem.
Scripts written for application in the Analysis Server are subject to certain restrictions. For more information, refer to the help chapter Analysis Server: General.
Under Windows 7 or Windows Server 2008 R2, there are issues displaying character strings when printing or exporting to PDF and XPS documents if you control the system via remote desktop. DIAdem prints character strings without or with too little character spacing. This is a Microsoft issue described at http://support.microsoft.com/kb/2768741. There Microsoft offers a solution in form of a hotfix. In case you cannot install this hotfix, you can also work around this issue using the setting Output print data as graphic under Settings»DIAdem Settings»REPORT.
If you change the size of the text displayed on the screen (DPI scale), for example, from 100% to 150%, under Windows 8.1 (minimum) and you do not restart the computer, display errors might occur in the curve selection in DIAdem REPORT and DIAdem VIEW.
When you activate DIAdem, you must create a National Instruments user profile at ni.com. The evaluation period is now 7 days without a user profile. If you create a user profile, this period is extended to 45 days.
When using the OPC UA server, a missing Windows update can lead to error messages because functions or DLLs are missing. If this error occurs, check the logfile as to whether a message describes an error in the search path extension. To eliminate this error, install the Windows Update KB2533623 at https://www.microsoft.com/download/details.aspx?id=26767.
When loading a DAC block diagram, DIAdem now checks whether the block diagram contains outdated blocks. The block diagram can still run with these blocks, however the outdated blocks are identified with a label. Please replace these by up-to-date blocks because in future versions the earlier blocks will no longer be supported.
In order to use the following DIAdem drivers the following NI software components must be installed:
Driver | Components | Version |
ADCS | Automotive Diagnostic Command Set | >= 18.0 |
DAQmx driver | NI-DAQmx | >= 9.4 |
ECU MC | ECU Measurement and Calibration Toolkit | >= 18.0 |
XNET | NI-XNET | >= 15.0 |
Compatibility of DIAdem 2018 and DIAdem 2017
To find information on the compatibility of earlier DIAdem versions refer to ni.com/support under the search term "DIAdem Release Notes".
The old script interface for accessing REPORT objects through GraphObjOpen and GraphObjClose will no longer be supported in DIAdem 2018. As of DIAdem 2018, you must use the object-oriented script interface in DIAdem REPORT. Due to this change, DIAdem no longer supports the CurveTransfCmd variable for the curve transformation in a 2D axis system. Use the D2CurveTransformingContext object and the OnCurveTransformation property instead.
You can use the Add for Workers method to create a maximum of five worker objects.
DIAdem 2018 is only available in the 64-bit version.
As of version 2018, DIAdem only supports the methods, properties, and subobjects of the DataFinderSettings object returned with the GetSettings for DataFinder for the My DataFinder DataFinder. Use the DataFinder Configuration API to configure a DataFinder Server. Refer to Programing Reference»REST APIs in the TDM Server help for a description of the DataFinder Configuration API.
As of version 2018, DIAdem no longer supports the DataFinder Manager object for DataFinder Server. Use the DataFinder Configuration API instead. Refer to Programing Reference»REST APIs in the TDM Server help for a description of the DataFinder Configuration API.
Notes on Future DIAdem Versions
Accessing channels through channel numbers will only be supported up to and including DIAdem 2018. For many versions, the channels were most commonly referenced DIAdem with the group index or the group name combined with the channel index or the channel name.
As of version 2019, DIAdem VIEW no longer supports the number-oriented mode.
The control file driver will only be supported up to and including DIAdem 2018. Use the script driver together with the UDI object in future versions of DIAdem. The UDI object provides a neutral interface for the communication interfaces in the computer, for example, RS-232 and GPIB. Use the CreateUDI command to create the UDI object. Refer to the help for more information on the script driver and the UDI object.
The channel property DisplayType will be read-only in DIAdem 2019. In DIAdem 2018 this property is also read-only if you enable the setting “High resolution for absolute time values” in the DIAdem settings. Use the commands ChnTimeToNumeric and ChnNumericToTime to convert time channels into numeric channels and vice versa.
The Logos communication protocol (communication via UDP) used by DIAdem versions before DIAdem 2012 SP2 will no longer be supported as of version 2019. This means that earlier clients can no longer communicate with DataFinder Server 2019 or My DataFinder 2019. In future, you can only use Logos XT (communication via TCP) for communication with DataFinder. This applies to the DIAdem and LabVIEW DataFinder Toolkit clients.
Product Security and Critical Updates
New Features in DIAdem 2018 SP1
New Features in DIAdem 2018General
DIAdem offers a much higher resolution for time channels.
Improvement to parts of the interface through modern, flat design.
New command for creating a MQTT object. The MQTT object provides the Message Queue Telemetry Transport Protocol in DIAdem. The MQTT protocol is an open message protocol for machine-to-machine (M2M) communication for the transmission of telemetry data between devices.
For the display of new curves, you can choose between six predefined color schemes or define your own color scheme.
DIAdem NAVIGATOR, DataFinder, Data Portal
Lossless compression of the metadata of TDM files.
Optimization of the data type of mass data without significant errors.
The Bus Log Converter now also supports the AUTOSAR format, Head Acoustics, and the Bus Log Raw format.
The context menu of the Data Portal has been revised and can be adapted by the user through the script interface.
DIAdem VIEW
You can switch between absolute and relative time displays.
You can specify a channel that DIAdem uses to color the track in the map display. DIAdem divides the colors of the palette between the largest and the smallest value of the color channel.
You can change line thickness for curves, for example, to improve the curve display on high-resolution monitors.
You can now draw curves with edge smoothing.
In the global DIAdem settings, you can define your own colors that DIAdem automatically uses to create new curves.
The display of very long, monochrome tracks in the map display has been accelerated.
DIAdem ANALYSIS
New smoothing function: The 4253H filter applies several smoothing in succession, resulting in a smooth signal, but with essential structures still visible.
New geo functions
- GPS distance from start: Calculates the shortest distance of a GPS coordinate to the following GPS coordinate, taking into account the ellipsoidal shape of the Earth. The function sums up the distance values.
- Calculate SRTM altitude profiles: Determines the corresponding altitude values from longitude and latitude.
- Humidity functions: Conversion of the relative humidity into absolute humidity and vice versa.
The new ChnEvent function ChnEventInvalidValues checks whether invalid values are contained in a channel.
An exact check of the value difference has been added to the function ChnEventDetectionDifference. To do so, the function supports three further test modes.
DIAdem REPORT
In DIAdem REPORT you can switch between absolute and relative time displays.
Revision of the PowerPoint export: Exporting to PPTX format no longer requires PowerPoint to be installed. DIAdem no longer supports export to PPT format, but only to PPTX format. You must convert existing PPT templates to PPTX format. The PowerPoint export can now attach slides to an existing PPTX file.
Attaching PDF and PPTX files is now also possible directly from the interface.
New display type "Spider axis systems": With the spider axis systems you can display data of the same categories in the form of a spider web or radar diagram.
Bar displays can also be grouped.
Bar displays can also be stacked on top of each other.
In constants and coordinates you can specify a second coordinate and color the areas between these coordinates. You can also add a comment field to the coordinates.
In 2D curve displays you can specify the color channel with the values DIAdem uses to display the curves in the palette colors.
In a 3D axis system with a 3D curve display, you specify a color channel whose values DIAdem uses for displaying the curve in the palette colors.
At various points, such as bars, filled surfaces, or 3D contour tables, you can set the transparency of the color in the dialog box.
In a 3D axis system with a 3D curve, you can choose whether DIAdem displays the 3D curve or just a projection to the planes.
The characteristic diagram display is much faster, especially for large arrays.
The PDF output of large characteristic diagrams produces much smaller files.
In the global DIAdem settings, you can define your own colors that DIAdem automatically uses to create new curves.
The context menu of the REPORT objects has been revised and can be adapted by the user on the script interface.
Because the zoom mode has been revised, you can position objects more precisely.
DIAdem DAC / DIAdem VISUAL
You can change the configuration of the display blocks during the measurement.
The configuration dialog boxes have been revised in order to structure the block settings clearer.
Support of cDAQ Chassis with Time Sensitive Networking (TSN).
The ECUMC driver now also supports data output.
The XNET driver now supports AUTOSAR.
You can now configure the visibility of signals in the display blocks with a checkbox in the same way as in the REPORT and VIEW panels.
DIAdem SCRIPT
The tabs have been moved up from the bottom of the workspace. Each tab has its own close icon.
The performance of the CodeCompletion function - the automatic display of a list of objects, commands, and procedures - is improved.
You can use the TaskPanel control to define a control with expandable groups containing sub-entries in the user dialog box. You can change the content dynamically, determine the selected entry, and react to a click on this entry.
The configuration dialog boxes of the Data Preprocessor and the Analysis Server have been revised. For example, you can edit the contents of an Analysis Server packet, such as scripts and layouts, directly in the configuration dialog box.
Bug FixesCorrected Errors in DIAdem 2018 SP1
699874 | DIAdem cuts off very long error messages. |
716108 | The example data in the DataPlugin help is incomplete. |
684997 | You cannot copy channels to an external editor if you select the channel group for copying. |
699676 | DIAdem calculates inaccurate step widths for an explicit waveform channel if the numeric values consist of a large number of digits before and after the decimal point. |
371329 | An error occurs if you open a file with a single quotation mark in the filename with the Excel DataPlugin Wizard. |
591496 | If you load several tests from a dataset into an empty portal with appended loading, DIAdem loads all tests instead of appending the channels from the second test to the channels of the first test. |
627286 | In MME Export, the leading point is missing from the property identifiers. |
701980 | DIAdem may crash in certain cases when displaying contours. |
720588 | In the legend you can only display the distance between the upper and lower cursor for the leading curve, but not for other curves. |
720589 | If DIAdem displays several curves, the small cross for the second band is missing when using the band cursor in combination with the curve cursor. |
712356 | If you select a large value for the overlap of the time intervals in the FFT with one time signal, the calculation is only possible for the first call. |
718697 | The ChnFullSpectrum command with the setting "FullSpectrumIntervalType=NoOfIntervals" may cause an access violation. |
719735 | The result properties generated by the approximation are only partially grouped. |
648883 | DIAdem does not align rotated texts correctly if the texts have different reference points. |
677505 | DIAdem does not correctly align the caption of a 3D color palette if the setting "Label on every nth symbol" does not have the value 1. |
701677 | In the 2D table dialog box, the entries "Automatic minimum" and "Automatic maximum" in the enumeration list of the table length are reversed. |
713275 | In the context menu "Add Curve Coordinates" of a curve, the texts "Absolute Maximum" and "Absolute Minimum" were reversed in the English and Japanese versions. |
715248 | The differential characteristic diagram of a 3D axis system displays wrong results for certain data. |
722249 | If you align the contents of multi-page 2D tables with the decimal point, the alignment is only correct on the first page of the table. |
722266 | If there are no contour lines in a characteristic diagram, DIAdem does not color the characteristic diagram. |
722286 | In 2D tables with horizontal alignment, DIAdem arranges the individual background colors of the heading in the wrong order. |
722954 | If you rotate an characteristic diagram in the xy-view around the z-axis, the isolines disappear. |
710013 | The OPC UA driver cannot establish a connection to an OPC UA server if the URL of the server does not match the URL stored in the certificate of the OPC UA server. |
711082 | The calibration measurement in the "Two-point scaling” block leads to an error. |
708698 | The functions ChnEventOperationAND, ChnEventOperationOR, and ChnEventFind in formulas with AND or OR can trigger a runtime error if very long result lists are used. |
Corrected Errors in DIAdem 2018
CAR ID | Description |
636620 | The example "Checking DataPlugins for Timeout” might lead to an error. |
641015 | Calling a script with the key combination shift and function key might only be possible once. |
647079 | The dialog box “Exit DIAdem” does not recognize that changed data files must be saved in TDMS format. |
540302 | When values are copied from a channel into an empty channel, the target channel receives the name of the source channel. |
524528 | When values of properties are being searched for on several levels of a data store, for example AOP5, the button "Automatically determine property columns from search” is enabled by default. |
637677 | The Bus Log Converter does not support more than seven databases. |
639560 | The Bus Log Converter scales the time stamp of GIN multi-loggers incorrectly. |
646570 | The channel names created in a Japanese version by the DataPlugin Wizard are incorrect. |
647966 | If you click the “Reset” button in the Bus Log Converter dialog box, DIAdem enters duplicate entries in the “File type” selection field. |
661065 | DIAdem does not include files that are not in the list of recently loaded files. |
661495 | Converting with the Bus Log Converter has become slower. |
678864 | Loading result columns from a search returns incorrect values when the first values in the column are NoValues. |
680154 | If you save data with waveform channels as an Excel file in DIAdem, DIAdem only generates a time channel for the first waveform channel, even if the other waveform channels do not have the same values for step width and offset. |
680953 | If you configure the Bus Log Converter so that DIAdem converts MDF4 files automatically, DIAdem crashes during interactive conversion after you have converted a file with drag and drop. |
687217 | The Bus Log Converter does not support ID 0 in Vector ASCII files. |
690246 | When DIAdem loads LVM files, the time channels might be incorrect. |
691684 | DIAdem cannot load TDMS files when the filename extension was changed, for example, from ".tdms" to ".abc". |
696506 | DIAdem cannot open TDMS files containing empty channels with scaling information. |
696962 | When converting CAN FD frames from Vector BLF files, you receive wrong signals. |
641698 | DIAdem might truncate the cascade displays on the right edge. |
653748 | The synchronization of videos with the cursor might not work properly. |
677011 | The legend properties CursorX2 and CursorY2 do not display the values of the second band cursor or second frame cursor. |
683279 | The contour display might not display horizontal and vertical sections through the data. |
683685 | The VIEW table might be empty after a layout is transferred to REPORT. |
697987 | You cannot create and include a user dialog box from a template. |
698282 | When a cascade is zoomed, DIAdem displays the label channel incorrectly. |
698293 | DIAdem does not save the label channel of a cascade display. |
540722 | With certain setting the dialog box “Reducing Classification” does not work correctly. |
639569 | If you assign a value determined with the function ChnFind to a variable, DIAdem reports a syntax error. |
660741 | The compound classification returns incorrect values when the input channels contain NoValues. |
666356 | DIAdem writes the results of the statistical functions coefficient of variation and relative coefficient of variation into the same channel property. |
666387 | In the calculator, you cannot assign values to the properties of known objects, such as the Data object. |
671419 | It might not be possible to open the event search dialog box if there is either no data set or a different data set was loaded and you previously used the event search via the dialog box. |
678627 | The XOffsetCalc command returns incorrect results for XOffsetDeltaN when the time channel does not start with the value 0. |
684146 | If you change the property names for statistical parameters in a Data Preprocessor configuration, DIAdem also applies these changes to the mathematical function"Descriptive Statistics" after the simulation. |
689984 | The dialog box for rounding channel values does not display the calculated error. |
608824 | The graphic export of maps with many interpolation points might lead to an error. |
638927 | If you deactivate the first curve in a 2D axis system and select the "N systems" setting for the axis position, DIAdem displays the remaining curves incorrectly. |
639567 | For the 3D curve type "Isolines", you cannot select the "Same color as curve" setting for labeling the contours. |
639845 | In automatically expanding 2D tables, DIAdem displays the heading field too large. |
639848 | If the setting "Automatic row height" is selected for the "table length" of a 2D table, DIAdem displays the texts with too little space to the table border. |
642850 | With certain scaling settings, automatic Y-axis scaling in a 2D axis system can result in an enlarged scaling range when being updated. |
643639 | DIAdem reports an error if the method "MoveToForeground" is not executed on the active page. |
646806 | The display of many curves in a 2D axis system may lead DIAdem to crash. |
648622 | If the DIAdem setting "Print all pages with expanding tables completely" is enabled and the worksheet with the table is not open when exported as a PDF file, DIAdem reports an error and does not create a PDF file. |
648740 | If you copy and paste grouped objects and then group these group, DIAdem might crash. |
652732 | The alignment of several 2D axis systems does not function correctly if the "N systems" setting was set for at least one of these 2D axis systems as the "Axis position". |
653725 | The Diagram Wizard generates an error in scaled layouts. |
657060 | An error may occur when the Diagram Wizard is being used. |
661867 | In some cases, DIAdem does not position the curve of a 2D axis system with the scaling mode “Range and ticks manual” in the center of the axis system. |
665648 | In DIAdem REPORT you can only align main objects with each other. |
665890 | DIAdem calculates the tick distance in a 2D axis system incorrectly if this axis system contains several constants and the last constant is outside the scale. |
668866 | When adding 4D or 6D vector curves in a 3D axis system, an error occurs when you change the second or third vector end point. |
669874 | In a 2D table, the dividing line between the columns and the headings cannot be changed interactively if you have set the scaling to "Automatically increasing" or "Automatic row height". |
670718 | DIAdem does not always export dashed lines correctly to a PDF file. |
675224 | You cannot rename a text object through the context menu. |
679093 | DIAdem exports non-printable pages when exporting to PowerPoint. |
679615 | DIAdem does not save the changed column order of a 2D table. |
683083 | The PowerPoint export does not export graphics in portrait format. |
688604 | The "OnPicUpdateStart" event can lead to access violation under certain circumstances. |
692045 | If a 2D table contains text with line breaks and you reduce the size of the DIAdem window substantially, DIAdem can no longer export graphics. |
692471 | In some cases, a differential characteristic diagram shows incorrect values at the edges. |
697843 | If DIAdem cannot find the channel for labeling the curve points, DIAdem uses the y-channel as the labeling channel. |
638118 | It is not possible to change the case when renaming a block. |
644036 | A block diagram, which operates two output blocks with a driver and a system clock in the foreground and in the interrupt mode, might crash during the measurement. |
645130 | Counter measurement with the NI-DAQmx driver lead to inaccurate results. |
648824 | When the DAC dialog box “Save Data” is opened when the setting “The capacity of the storage medium determines the end of the measurement” is enabled, an error occurs. |
686310 | In some cases DIAdem calculates the maximum possible sampling rate incorrectly when measuring with the NI-DAQMX driver in hardware clock. |
695728 | The script driver does not find a script file if the file name contains additional dots in addition to the file name extension. |
626576 | The DIAdem script debugger does not work if you place a breakpoint directly after the MsgBox or the InputBox command. |
641235 | With the ECU driver it is not possible to assign values to ECU properties with a script. |
647020 | Deleting a large number of channels with the Data.Remove method may be slow if there are many channels in the Data Portal. |
651270 | You cannot load text searches in the configuration dialog box of the Analysis Server Procedure. |
652675 | The TextToClipBoard command can block actions with the clipboard if the clipboard does not contain any texts. |
653821 | If you edit a file in the script editor that is stored on a slow network drive, there may be delays in displaying the characters you have just entered. |
660751 | The FileCopy command only ends the copy process after the second manual abort. |
662217 | The value of the channel property "implicit_start" of an implicit time channel is not a vbDate data type. |
663653 | When processing the values of the property "Properties <Data>" with the DataTypeFloat32 data type, DIAdem includes too many decimal places. |
670754 | The Activate for Sheet method also automatically opens the DIAdem REPORT panel. |
676812 | The execution of the property Navigator.Display.CurrDataStore.GetDataStore.RootElements.Count leads to a crash of DIAdem when only the “Computer” data store is enabled. |
678209 | DIAdem does not replace the channel names of CSV files in a Data Preprocessor configuration via “Replace property values” when these files use a DataPlugin that supports row-based reading of the data. |
679534 | If you set columns with special control characters as fixed replacement pattern in the dialog box “Replace Property Values»Edit Rule” in the configuration of the Data Preprocessor, the dialog box will crash. |
679681 | The command ChnGenTime cannot create a constant time channel. |
688527 | The Analysis Server does not support the ExportToPowerPoint for Sheets method. |
692781 | If you use the command DataFileSave with the storage method "CSV_EXPORT", a memory leak occurs. |
Accessing the Help
Finding Examples
Automating the Installation of NI Products
The automatic installation of individual NI products are described in KB 4CJDP38M, Customize and Automate Installation of a Single Installer.
The automatic installation of NI products within a suite, such as the NI Developer Suite, is described in KB 4GGGDQH0, Customize and Automate Installation of a Suited Installer.
Refer to KB 4CJDR18M, Determine Type and Version of My National Instruments Installer for a description version of the NI Installer your product contains.
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
Legal Information
Legal notices: <National Instruments>_Legal Information and <National Instruments> directories.
EULAs: <National Instruments>SharedMDFLegallicense
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products:
NI Volume License Manager 3.1.2 Readme
Overview
System Requirements
Personal computer using a Pentium 1GHz or higher microprocessor
At least 500 MB of disk space
Minimum of 512 MB of RAM, 1024 MB recommended
Supported Operating Systems
Windows 10/8.11/7 SP12
Windows Server 2012 R21
Windows Server 2008 R2 SP12
Installation Instructions
Run the self-extracting executable to launch the installer.
Click Install NI Volume License Manager 3.1.
Follow the steps to complete installation.
Product Security and Critical Updates
New Features
Reporting
Administrator Notifications
Email Clients Wizard
Batch Update Custom Fields
VLA Log Wizard
Permission Request Client Notifications
Licenses View In-Use Tab
VLA Policies
Export Current Permissions
Reporting
Administrator Notifications
Email Clients Wizard
Batch Update Custom Fields
VLA Log Wizard
Permission Request Client Notifications
Licenses View In-Use Tab
VLA Policies
Export Current Permissions
Known Issues
ID | Known Issue |
352579 | Pinned shortcuts are removed when upgrading NI VLM Workaround: None Added: 05/21/2013 |
Accessing the Help
Automating the Installation of NI Products
For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Customize and Automate Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Customize and Automate Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, Determine Type and Version of My National Instruments Installer.
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
Legal Information
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
TDM Server 2018 SP1 Release Notes
System Requirements
Minimum System Requirements
CPU | x64 compatible processors, 4 processor kernels, clock frequency 1.4 GHz |
Amount of memory | 8 GB |
Hard disks for software and index | The software installation needs approximately 4 GB storage space. TDM Server needs at least 1 GB free disk space during operations. |
Recommended System Requirements
CPU | x64 compatible processors, 8 processor kernels or more, clock frequency 2.5 GHz or more |
Amount of memory | 16 GB or more |
Hard disks for software and index | 15,000 rpm SAS drives or SSD drives; The software installation needs approximately 4 GB storage space. However, depending on the size of the DataFinder index, considerably more storage space might be necessary. TDM Server needs at least 1 GB free disk space during operations. National Instruments recommends you store the DataFinder index on a separate drive. |
Supported Browser
Miscellaneous
Note From version 2019, TDM Server no longer supports Internet Explorer. |
Supported Operating Systems
Windows Server 2008 R2 SP12
Windows Server 2012 R21
Windows Server 2016
Note TDM Server does not support server versions from the Microsoft Semi-Annual Channel. In addition, TDM Server does not support Windows Server Core mode. |
Note DataFinder Server, LabVIEW DataFinder Toolkit, and DIAdem Version 10.0 and later versions install and use a common software component (DataFinder client), which is refreshed through the installation of DataFinder Server. When you uninstall DataFinder Server, the current version of the shared component remains. This is intentional and has been tested extensively. DataFinder Server 1.0, LabVIEW DataFinder Toolkit 2009, DIAdem 9.0, LabWindows/CVI 8.1, and LabVIEW 7.1 and later versions install and use a common software component (USI), which is refreshed through the installation of DataFinder Server. When you uninstall DataFinder Server, the current version of the shared component remains. This is intentional and has been tested extensively. |
TDM Server 2018 Clients
Notes on TDM Server and Data Navigator
Following the setup, reboot the operating system to complete the TDM Server installation. DataFinders and TDM Server that are already installed are stopped before the installation or before an upgrade. This also applies to other NI products based on the NI Skyline Framework. It is not possible to simultaneously install several TDM Server versions on the same operating system. Following the upgrade of an existing TDM Server, you can update the individual instances and then continue using TDM Server.
You can configure a maximum total of 15 server instances (DataFinder Server, Federation Server, Data Preprocessor, and Analysis Server) in TDM Server Manager.
TDM Server is shipped together with an embedded database. To operate TDM Server over this database does not require special knowledge or administrative database operations. The administrative steps are either automated or can be executed manually over the TDM Server Control Panel. As an alternative to the embedded database, you can use Microsoft SQL Server as the database. In this case the database must be created and maintained by a Microsoft SQL Server administrator. TDM Server supports the Microsoft SQL Server versions 2005, 2008, 2008R2, and 2012.
If a Microsoft SQL Server is used as the database backend in DataFinder Server Edition, you can only use the “Use Optimized Background Processes” feature if the partitioning feature of SQL Server is available. Partitioning in SQL Server is only available for Enterprise Edition. Since SQL Server 2016 SP1, partitioning is also available for all editions.
Note: Once DataFinder Server Edition uses a SQL Server with partitioning support, it is not possible to migrate or recover the DataFinder Server on a SQL Server that does not support partitioning.
In Data Navigator you can export a maximum of 200 search results to a zip file. Exported zip files must not be larger than 2 GB.
The TDM Web Server REST APIs replace the previously used DataFinder Manager Script API.
During installation, you can no longer change the path in which the index of a DataFinder is stored. To specify a different path, open the Index/Cache settings in the TDM Server Control Panel after the installation.
New FeaturesNew Features in TDM Server 2018 SP1
Analysis Server scripts provide new properties and methods for , using the SystemLink File Viewer and SystemLink Tag Viewer.
A channel preview is now available in the Data Navigator Properties Display.
New Features in TDM Server 2018
New application "Data Navigator". Data Navigator is a web application which you use for browsing the DataFinder servers of TDM Server without having to install the program on the client computer. You can execute quick searches and
advanced searches, evaluate the properties of the search results, and save search results in the original or in the TDM format on your hard disk.
Create and restore backups of an analysis server.
Optimize the background processes of DataFinder, for example when deleting DataPlugins or search areas, so that the DataFinder can react faster to requests from the client.
Exclusive editing of a server instance to accept several changes in one step. Simultaneous changes to the server configuration through different users are also prevented by this.
Improved workflow in the Server Manager web interface. Instead of superordinate menus, the web interface offers a context-specific configuration icon with logical next steps.
Display status information of all server instances in the Server Manager.
REST API for server configuration of DataFinders, Data Preprocessors, and Federations.
REST API for searching, browsing, and converting files in the DataFinder index
ASAM ODS 6.0 compatible Web-API for accessing the DataFinder index
Python scripting support as an alternative for VBS for Analysis Server procedures.
Developer support for all REST interfaces through the integrated SwaggerUI.
Simplified TDM Server web server setup for evaluation.
Bug Fixes
Fixed Bugs in TDM Server 2018 SP1
CAR ID | Description |
708431 | Accessing the “Advanced Statistics” of a DataFinder or Data Preprocessor from computers in certain time zones results in the message "Invalid date". |
708395 | TDM Server does not apply security settings defined for a search area. |
719134 | The Python environment and imported Python libraries are not unloaded after executing a Python analysis procedure. |
718549 | A high Analysis Server HTTP API call frequency leads to an increase in memory consumption. |
722576 | Analysis Server may no longer be able to send search queries to a DataFinder. |
725664 | When you create a DataFinder or Data Preprocessor, regular backup is enabled. |
Fixed Bugs in TDM Server 2018
CAR ID | Description |
647223 | The DataFinder does not tell you how long it takes to optimize the index. |
673469 | The REST interface of the TDM Server might not return the value String.Empty instead of null for unoccupied values. |
678588 | DIAdem does not replace the channel names of CSV files in a Data Preprocessor configuration via “Replace property values” when these files use a DataPlugin that supports row-based reading of the data. |
684835 | The Analysis Server uses a concurrent-connection license when executing a search query deposited in an Analysis procedure. |
685338 | A misleading error message appears when a DataFinder backup is being created in a shared network folder. |
687364 | The National Instruments license manager might sometimes count the number of licenses in use incorrectly. |
687371 | Analysis Server does not support the ExportToPowerPoint for Sheets method. |
687366 | If the path to a search area is very long, the DataFinder may crash. |
687367 | Folder names that contain Japanese characters might lead to problems on the "Search Areas" page of a DataFinder server. |
687368 | When optimizing a very large number of custom properties, a timeout may occur. |
687369 | The trigger on file changes might not receive change messages if the connection to a search area on the network drive is temporarily interrupted. |
687371 | The Analysis Server does not support the ExportToPowerPoint for Sheets method. |
691729 | Analysis Server processes tasks although the associated data source is not released. |
696575 | The input fields in the dialog boxes for creating tasks are too small. |
Known Issues
You cannot use the DataFinder with a Microsoft SQL adaptor if the DataFinder is running on a computer with Microsoft Windows Server 2008 R2, or an earlier version. Install Microsoft Windows Server 2008 R2 Service Pack 1 to solve this error. Microsoft describes this problem on the Microsoft website in the KnowledgeBase entry 2640696. A hotfix for this issue is on the Microsoft website in the KnowledgeBase entry 983246.
If you stop the Analysis Server and specify that the processing of open tasks is to be continued, the overview displays the current tasks as 'Canceled' after the Analysis Server restarts, even if these tasks are still being processed.
The Analysis Server does not support the method Report.Sheets(x).Objects(y).Select.
Using TDM Server on an operating system that is not a server operating system may lead to issues. In particular, TDM server does not support the Windows Standby mode or the Windows Hibernate mode.
The operation of the TDM Server requires a user profile for the TDM Server account. The resources to be used in the operation (for example a printer) can then be assigned to this user profile. Windows creates the user profile automatically as soon as you log on to the server machine with the respective TDM Server account. The user profile of the TDM Server account is also required for the output of PDF documents.
If you have a parallel installation of TDM Server 2018 and DIAdem 2017, you cannot use the DataFinder hierarchy preview, which you open in DIAdem SCRIPT through “Settings»TDM Server»DataFinder Hierarchy”.
You cannot delete or upgrade DataFinder instances of DataFinder Server Edition 2015 in TDM Server 2018. Instead, create a backup of the DataFinder instance and restore this instance in TDM Server 2018 from the backup. Nor can you upgrade a Federation of DataFinder Server Edition 2015 in TDM Server 2018. You must delete the Federation in DataFinder Server Edition2015 and re-create it in TDM Server 2018. Then you must reconnect the Federation members with the Federation you created.
Analysis Server configurations (*.ANP) must not exceed a file size of 1 GB.
If you switch to a TDM Server account in the TDM Server Control Panel that does not have administrator permissions on the server, SystemLink JupyterLab crashes.
When you uninstall TDM Server, server instances are not deleted. Delete the servers manually so that the servers do not remain on the system.
If you uninstall the entire National Instruments software in NI Package Manager in a single step, you may receive the error message "A plugin returned one or more errors at the end of the transaction. You can ignore these error messages and confirm with OK as they are not relevant for the uninstallation.
From Windows 10 1803 onwards, the Edge Browser prevents live updates coming from the server when an unsecured connection is used. This affects the CPU load display, server status updates, and other incoming notifications.
Automating the Installation of NI Products
The automatic installation of individual NI products are described in KB 4CJDP38M, Customize and Automate Installation of a Single Installer.
Refer to KB 4CJDR18M, Determine Type and Version of My National Instruments Installer for a description version of the NI Installer your product contains.
Discontinuing Support for Logos
Legal Information
Legal notices: <National Instruments>_Legal Information and <National Instruments> directories.
EULAs: <National Instruments>SharedMDFLegallicense
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products: