石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI RFmx SpecAn 2.2 Full Win32/64ENG RFmx频谱分析仪2.2完整版

文章来源:石鑫华视觉网时间:2022-04-06 11:30:49 点击:605

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI RFmx SpecAn 2.2 Full Win32/64ENG RFmx频谱分析仪2.2完整版

RFmx SpecAn
RFmx SpecAn为时域和频谱分析提供互动和自动测量。
RFmx SpecAn是一款测量专用软件，旨在扩展NI RF仪器进行频谱分析和特定设备特性分析的能力。该软件可以通过发射功率(TXP)、相邻信道功率(ACP)和CCDF等测量，对时域、频域和功率域中的信号进行分析。您可以使用内置的数字预失真(DPD)模型来分析和校正幅值-幅值/幅相失真(AM-AM/PM)，或者获取相位和幅值时间变化曲线(PAvT)，以验证波束形成器的性能。借助RFmx，您可通过交互式软面板快速轻松地执行和调试测量，使用RFmx Waveform Creator创建和回放开放的未锁定波形，并结合更高性能的API加快自动化测试的速度。

发布日期:
2016/12/18
包含的版本:
2.2完整版
受支持的操作系统:
Windows 10 (32-bit and 64-bit)
Windows 8.1 (32-bit and 64-bit)
Windows 8.0 (32-bit and 64-bit)
Windows 7(SP1) (32-bit and 64-bit)
Windows Server 2008 R2 (64-bit)
语言:
英文
应用程序位数：
32/64位
校验和：
文件大小: 741273560 字节 (706.93 MB)
修改日期: 2016-12-09 00:10
MD5: 5c68ac1b8cac201cd6e3af5c79a3ba7a
SHA1: 5dbc68489dc393038fa8cdce1962900430ac95d7
SHA256: 9cf15d597210f458397bef9482c7808fb72254910dca8a003711f85b64d9ae0d
CRC32: 4e4398ea

百度网盘和NI官方下载地址：
注册登陆视觉论坛用户，购买附件查看下载地址

NI RFmx SpecAn 2.2 Full Win32/64ENG RFmx频谱分析仪2.2完整版

http://pcmv.cn/thread-28373-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)



NI-RFmx SpecAn 2.2 Readme

December 2016
Thank you for using NI-RFmx SpecAn. This file contains important information about NI-RFmx SpecAn and is organized into the following sections:

New Features

NI-RFmx SpecAn 2.2 includes the following new features:

  • Support for LabVIEW 2016 (32-bit and 64-bit)

  • Addition of noise figure (NF) measurement using Y-Factor and Cold Source methods.

  • Addition of intermodulation (IM) distortion measurements.

  • Support for noise compensation in Spectrum measurement.

  • Support for the linear LUT type in DPD.

  • Support for ENBW on RBW filter bandwidth definition.

  • Addition of Allan Deviation result in frequency counter (FCnt) measurement.

  • Support for LO leakage avoidance when using vector signal transciever as the analyzer.

  • Support for Limited Configuration Change when sweeping frequency and reference level in test applications.

  • Addition of advanced instrument attributes to measurement interactive panel.

NI-RFmx SpecAn 2.1 f4 includes the following bug fixes and updates:

  • Fixed an issue where NI-RFmx was crashing when the memory usage in a process increased beyond 2 GB.

  • Recommended IQ Pre Trigger Time property now returns a positive number instead of a negative number. This property is applicable when NI-RFmx is used in the Analysis-Only mode.

  • For the Analysis-Only mode, user needs to adjust the t0 value of the I/Q waveforms according to pre-trigger samples present in the waveform before passing the waveform to the Analyze (IQ) function.

NI-RFmx SpecAn 2.1 includes support for the Hardware Agnostic Mode that allows you to perform measurements on a user-specified I/Q or Spectrum waveform.
NI-RFmx SpecAn 2.0 includes the following new features:

  • Addition of I/Q measurement

  • Support for multicarrier CHP measurements

  • Support for offset frequency definition in ACP and SEM measurements

  • Support for 3 dB, 6 dB, and bin width RBW definitions for spectral measurements

  • Support for detection of spurs with peak excursion as criteria in spur measurements and when using peak search with markers

  • Support for Magnitude Only and Phase Only correction for memory polynomial DPD models

  • Support for average, linear, and peak gain targets in DPD

  • Improved memory and speed performance of DPD measurements and composite measurements

  • Support for LabVIEW 2015 (32-bit and 64-bit)

NI-RFmx SpecAn 1.2 includes the following new features:

  • Support for NI 5668R

  • Addition of AMPM and DPD measurements

NI-RFmx SpecAn 1.1 includes support for C, LabWindows™/CVI™, and .NET.

Installation Instructions

Caution  Before you install NI-RFmx SpecAn 2.2, ensure that you have uninstalled all related NI-RFmx 1.0 products.
Caution  If you are using only RFmx LabVIEW Runtime products, NI recommends uninstalling all the RFmx Runtime products before installing a newer version of RFmx Runtime products.
NI-RFmx drivers requires that all the installed driver versions remain the same for proper functionality. This requirement is because NI-RFmx drivers share components. If driver incompatibilities exist, they are reported through a dialog box after installation. You can also use the Version Compatibility Checker utility to manually check for version incompatibilities. Refer to the Installed Software, Documentation, and Examples section for more information about the installed location of the Version Compatibility Checker utility.
Note  Some of the installed NI-RFmx SpecAn .NET examples require NI-RFSA .NET Class Libraries or NI-RFSG .NET Class Libraries. For these examples to build and run successfully, install NI-RFSA .NET Class Libraries or NI-RFSG .NET Class Libraries before or after installing NI-RFmx SpecAn.

Activation Instructions for NI-RFmx Noise Figure License

The Noise Figure measurement requires license activation. To evaluate or activate the Noise Figure license, you must install the Noise Figure license, which is a separate installer from the RFmx SpecAn installer. If you install the Noise Figure license but do not activate it, you will have 30 days from the first time you use the measurement to evaluate it.

Supported HardwareVector Signal Analyzers

  • NI PXIe-5663

  • NI PXIe-5663E

  • NI PXIe-5665

  • NI PXIe-5668R

  • NI PXIe-5698 with NI PXIe-5668R

Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help.

Vector Signal Transceivers

  • NI PXIe-5644R

  • NI PXIe-5645R

  • NI PXIe-5646R

  • NI PXIe-5840

Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.

System RequirementsSupported Operating Systems

NI-RFmx SpecAn 2.2 supports the following operating systems:

  • Windows 10/8.11/7 SP12 (32-bit and 64-bit)

  • Windows Server 2008 R2 SP12 (64-bit)

1 NI software installs VC2015 Runtime and .NET 4.6.1. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
Note  NI-RFmx SpecAn 2.2 does not support Windows Server non-R2 editions.
NI recommends that you have the most recent service pack for your operating system installed.

Minimum Requirements

  • Processor—Intel i3 or equivalent

  • RAM—2 GB*

  • Microsoft Internet Explorer 5.5 or later

  • A screen resolution of 1300 x 700 with 256 colors

  • Windows 10/8.1/7, with all available critical updates and service packs

  • Microsoft .NET Framework 4.0**

*Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.
**Microsoft .NET Framework 4.0 is required for .NET support only.

Recommended System

  • Processor—Intel i5 or equivalent

  • RAM—4 GB*

  • Microsoft Internet Explorer 5.5 or later

  • A screen resolution of 1300 x 700

  • Windows 10/8.1/7, with all available critical updates and service packs

  • Microsoft .NET Framework 4.0**

*Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.
**Microsoft .NET Framework 4.0 is required for .NET support only.

Application Development Environments (ADEs)

Note  You should install ADEs, such as NI LabVIEW, NI LabWindows/CVI, or Microsoft Visual Studio®, before installing NI-RFmx SpecAn. To add support for ADEs installed after installing NI-RFmx SpecAn, modify your NI-RFmx SpecAn installation or launch the NI-RFmx SpecAn installer again.

  • NI LabVIEW 2013 SP1 f6 patch, 2014 SP1 f5 (32-bit) patch, 2014 SP1 f6 (64-bit) patch, 2015 SP1 f5 patch, or 2016

  • NI LabWindows/CVI 2010 or later

  • Microsoft Visual Studio 2010 SP1 or later

Note  NI-RFmx SpecAn does not operate correctly without the service packs and patches previously mentioned installed.

Other Required Software

  • NI-RFSA 14.1 or later

  • NI-RFSG 14.0.1 or later

  • NI-RFSG Playback Library 2.2 or later (for DPD examples)

Installed Software, Documentation, and ExamplesInstalled Software

  • <MSTUDIOVS2010DIR> is an alias for the following National Instruments file folder location:

    • (32-bit) Program FilesNational InstrumentsMeasurementStudioVS2010

    • (64-bit) Program Files (x86)National InstrumentsMeasurementStudioVS2010

  • <NIDir> is an alias for the following National Instruments file folder location:

    • (32-bit) Program FilesNational Instruments

    • (64-bit) Program Files (x86)National Instruments for 32-bit programs and Program FilesNational Instruments for 64-bit programs

  • <NIDocDir> is an alias for the following National Instruments file folder location: UsersPublicPublic DocumentsNational Instruments

  • <SYSDIR> is an alias for the following file folder location:

    • (32-bit) windowssystem32

    • (64-bit) windowsSysWow64 for 32-bit programs and windowssystem32 for 64-bit programs

File Locations

ItemInstalled Location
Version Compatibility Checker<NIDir>RFmx iRFmxCompatibility_Checker.exe
DLLs<SYSDIR>
Function Panels
<NIDir>SharedCVIBin iRFmxSpecAn.lfp
<NIDir>SharedCVIBin iRFmxInstr.lfp
Header files
<NIDir>SharedExternalCompilerSupportCinclude
Import Library files (32-bit)
<NIDir>SharedExternalCompilerSupportCinclude
Import Library files (64-bit)

  • 32-bit: <NIDir>SharedExternalCompilerSupportClib32msvc

  • 64-bit: <NIDir>SharedExternalCompilerSupportClib64msvc

C, .NET, NI TestStand
Examples<NIDocDir>RFmxSpecAnexamples
LabWindows/CVI
Examples<NIDocDir>CVIsamplesRFmxSpecAn
LabVIEW
Examples<NIDir>LabVIEW <version>examplesRFmxSpecAn
.NET Class Libraries
Assemblies<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.SpecAnMX.Fx40.dll
<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.InstrMX.Fx40.dll
<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.Common.dll

Executable

Select Start»All Programs»National Instruments»NI-RFmx SpecAn»NI-RFmx SpecAn Measurement Interactive Panel to launch the NI-RFmx SpecAn Measurement Interactive Panel.

Documentation

Documentation for NI-RFmx SpecAn is located at Start»All Programs»National Instruments»NI-RFmx SpecAn»NI-RFmx SpecAn Documentation. The documentation set is composed of the following documents.
DocumentFormatDescription
NI-RFmx SpecAn HelpHTML/Windows HelpInformation about NI-RFmx SpecAn. This help file is an HTML version of a traditional user manual that includes the following information:

  • An introduction to NI-RFmx SpecAn

  • How to get started with application development

  • A complete reference for all NI-RFmx SpecAn programming functions and VIs

NI-RFmx SpecAn 2.2 ReadmeHTML (this document)Information about supported hardware and operating systems, new features, fixed issues, and legal notices.
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.
To use the .NET API, you must install the .NET class libraries or the .NET Wrapper in addition to the NI device driver. For information about versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to the National Instruments .NET Driver Support document at ni.com/info and enter Info Code NETAPIdriversupport.

Accessing VIs and Functions

NI-RFmx SpecAn palette VIs are available from the Functions»Measurement I/O»NI-RFmx palette.
NI-RFmx SpecAn functions are available in LabWindows/CVI from the Library»RFmx SpecAn Library menu.

Finding Examples

In LabVIEW, you can use the NI Example Finder to search or browse examples. NI-RFmx SpecAn examples are classified by keyword, so you can search for a particular device or measurement function. In LabVIEW, select Help»Find Examples to launch the NI Example Finder. The NI Example Finder offers two ways to access all installed LabVIEW example VIs (including NI–RFSG and Modulation Toolkit examples) and their descriptions:

  • Click the Browse tab to locate modulation examples by task at Hardware Input and Output»Modular Instruments»NI–RFmx»SpecAn or by directory structure at RFmx»SpecAn.

  • Click the Search tab to search all installed examples by keyword. For example, search for "SpecAn" to locate all NI-RFmx SpecAn examples.

The NI Example Finder is also available in LabWindows/CVI by selecting Help»Find Examples.
You can also access all the installed NI-RFmx SpecAn examples for LabVIEW and LabWindows/CVI at Start»All Programs»National Instruments»NI-RFmx SpecAn»NI-RFmx SpecAn Examples.
Refer to ni.com/examples for these examples and for more information.

NI-RFmx SpecAn 2.2 Drops Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003

With this release, NI-RFmx SpecAn drops support for Microsoft Windows 7 RTM (with no service pack), Windows Vista, Windows XP, and Windows Server 2003. NI-RFmx SpecAn 2.2 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI-RFmx SpecAn 2.2 to an unsupported OS. Additionally, after installing NI-RFmx SpecAn 2.2, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.

Uninstalling/Modifying NI-RFmx SpecAn

For Windows 7, complete the following steps:

  • Launch the Control Panel by selecting Start»Control Panel.

  • Double-click Programs and Features.

  • Select National Instruments Software.

  • Click the Uninstall/Change button.

  • Select NI-RFmx SpecAn 2.2 from the dialog box that appears.

  • Click Remove to uninstall the product; click Modify to change the components that are installed.

For Windows 10/8.1, complete the following steps:

  • Right-click on the Start button.

  • Select Control Panel.

  • Select Programs»Programs and Features.

  • Select National Instruments Software.

  • Click the Uninstall button.

  • Select NI-RFmx SpecAn 2.2 from the dialog box that appears.

  • Click Remove to uninstall the product; click Modify to change the components that are installed.

As part of the NI-RFmx SpecAn 2.2 installation, the following software is installed. To completely remove the NI-RFmx SpecAn 2.2 installation from your system, you must also remove the following packages:

  • NI-RFmx SpecAn Runtime 2.2

  • NI-RFmx SpecAn Runtime 2.2 (64-bit)

Caution  Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.
Note  Do not attempt to uninstall by manually deleting files.

Behavior Changes

The following item is a behavior change in NI-RFmx SpecAn 2.0 from NI-RFmx SpecAn 1.2.

  • In the ACP measurement spectrum trace, RFmx 1.2 reports relative frequency from the RF center frequency on the x-axis. RFmx 2.0 reports RF absolute frequency on the x-axis.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI-RFmx SpecAn 2.2 Known Issues at ni.com for an up-to-date list of known issues in NI-RFmx SpecAn 2.2.

Bug Fixes

The following items are the IDs and titles of a subset of issues fixed in NI-RFmx SpecAn. This is not an exhaustive list of issues fixed in the current version of the NI-RFmx SpecAn. If you have a CAR ID, you can search this list to validate that the issue has been fixed.
The following items are changes in NI-RFmx SpecAn 2.2 from NI-RFmx SpecAn 2.1.
IDFixed Issue
579773Fixed an issue with CHP fetch results when multiple carriers are configured with a signal name.
572302Fixed an issue with abort measurements when performing spectral acquisition.
581477Fixed a memory leak with IQ measurement when a signal configuration containing IQ measurement is deleted.
605884Fixed an issue in .NET where the enum values of the Threshold Type attribute used in CCDF, FCnt, and TxP were not consistent with LabVIEW and C API.
601654Fixed an issue when switching between RFmx and RF toolkits where RFmx maynot apply the acquisition settings correctly in certain scenarios.
The following items are changes in NI-RFmx SpecAn 2.1 from NI-RFmx SpecAn 2.0.
IDFixed Issue
560637Fixed an issue with fetching all spurs list when traces are disabled.
554076Fixed an issue with the starting reference level used in auto level when preamp is enabled on NI PXIe-5668R.
The following items are changes in NI-RFmx SpecAn 2.0 from NI-RFmx SpecAn 1.2.
IDFixed Issue
531357Fixed an issue with AMPM and DPD when using waveforms with high auto correlation.
538026Fixed an issue with acquiring a signal using composite measurements and a trigger is enabled.
541755Fixed an issue where the default RBW definition was set to 3 dB bandwidth of the FFT window instead of using FFT bin spacing when using an FFT based RBW filter type in spectral measurements.
515825Fixed an issue with CHP measurement not integrating the power in the RRC filter roll off when the RRC filter is enabled and the span is not configured or it is configured to be less than integration bandwidth.
The following items are changes in NI-RFmx SpecAn 1.2 from NI-RFmx SpecAn 1.1.
IDFixed Issue
457564Fixed composite measurement on a multicarrier signal with at least one measurement measuring a single carrier.
506637Fixed an issue in which peaks were detected twice in some cases of Spur measurement.
510432Fixed an issue in which incorrect peaks were detected when the limit line had a nonzero slope in Spur measurement.
The following items are changes in NI-RFmx SpecAn 1.1 from NI-RFmx SpecAn 1.0.
IDFixed Issue
484980Fixed an issue in which the RFmxSpecAn Auto Level VI was not able to handle RF front end attributes.
488782Fixed an issue in which an error was not returned when the start frequency was equal to the stop frequency for Spur and SEM measurements.
484136Fixed an issue in which the waveform duration and delay in zero span were incorrect when RBW was set to a value less than 2 MHz.
487678Fixed an issue in which incorrect power was reported when the span was less than the integration bandwidth for CHP measurement.

Increasing Available Memory For Your Application

When developing memory intensive applications, you may encounter memory limits as 32-bit Windows applications only utilize 2 GB of memory by default. To expand the amount of memory an application can utilize, you can configure the executable to be large address aware to gain access to up to 3 GB of memory on a 32-bit Windows operating system and up to 4 GB of memory on a 64-bit Windows operating system.
For more information, refer to Memory Limits for Windows and Windows Server Releases on the Microsoft website.
Note  LabVIEW 8.5 and later are large address aware. For more information, refer to How Much Memory can LabVIEW 32-bit or 64-bit Use?.
In TestStand 2013 and later, the Large Address Aware flag is enabled by default for the TestStand Sequence Editor and TestStand User Interfaces. For more information, refer to Using the Large Address Aware Flag With TestStand Applications.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Using NI Software with Microsoft Windows 8.1

When you install National Instruments software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

Legal Information

Copyright
© 2014–2016 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

  • Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

  • EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

  • Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.


374847E-01


首页
84162741QQ
联系