石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI RFmx CDMA2000 2.1 Win32/64ENG完整版下载

文章来源:石鑫华视觉网时间:2022-03-29 13:02:32 点击:262

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI RFmx CDMA2000 2.1 Win32/64ENG完整版下载

RFmx CDMA2000
RFmx CDMA2000为cdmaOne和CDMA2000 1xRTT蜂窝测试应用提供信号生成和分析功能。
RFmx CDMA2000是一款测量专用软件，旨在扩展NI RF仪器生成和分析CDMA2000蜂窝信号的能力。该软件可以通过误差矢量幅度(EVM)、码域误差(CDE)、相邻信道泄漏比(ACLR)、频谱发射屏蔽(SEM)等符合标准的物理层测量，对cdmaOne (IS-95)和CDMA2000 1xRTT (IS-2000)反向链路信号进行分析。借助RFmx，您可通过交互式软面板快速轻松地执行和调试测量，使用RFmx Waveform Creator创建和回放开放的未锁定波形，并结合更高性能的API加快自动化测试的速度。

发布日期：
2016/2/3
包含的版本：
2.1完整版
受支持的操作系统：
Windows Server 2008 R2 64-bit
Windows 8.1
Windows 7
应用程序位数：
32/64位
语言：
英文
校验和：
文件大小: 777171520 字节 (741.17 MB)
修改日期: 2016-02-03 01:05
MD5: bb90a8700dfc12b53524943653ce800c
SHA1: 09f0074b8b524424ce86bbd480fed0cbbc867c48
SHA256: d069f4b5188009d2f5626b0de25069158bc00a363cb7b8c34d48c81c64674900
CRC32: ff85e162

百度网盘与NI官方下载地址：
注册登陆视觉论坛，购买附件查看下载地址

NI RFmx CDMA2000 2.1 Win32/64ENG完整版下载

http://pcmv.cn/thread-28353-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)



NI-RFmx CDMA2k 2.1 Readme

February 2016
Thank you for using NI-RFmx CDMA2k. This file contains important information about NI-RFmx CDMA2k and is organized into the following sections:

New Features

NI-RFmx CDMA2k 2.1 includes the following new features:

  • Support for C and .NET

  • Support for the Hardware Agnostic Mode that allows you to perform measurements on a user-specified I/Q or Spectrum waveform.

Installation Instructions

Caution  Before you install NI-RFmx CDMA2k 2.1, ensure that you have uninstalled all related NI-RFmx 1.0 products.
NI-RFmx drivers requires that all the installed driver versions remain the same for proper functionality because NI-RFmx drivers use shared components between them. If driver incompatibilities exist, they are reported through a dialog box after installation. You can also use the Version Compatibility Checker utility to manually check for version incompatibilities. Refer to the Installed Software, Documentation, and Examples section for more information about the installed location of the Version Compatibility Checker utility.

Supported HardwareVector Signal Analyzers

  • NI PXIe-5663

  • NI PXIe-5663E

  • NI PXIe-5665

  • NI PXIe-5668R

  • NI PXIe-5698 with NI PXIe-5668R

Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help.

Vector Signal Transceivers

  • NI PXIe-5644R

  • NI PXIe-5645R

  • NI PXIe-5646R

Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.

System RequirementsSupported Operating Systems

NI-RFmx CDMA2k 2.1 supports the following operating systems:

  • Windows 10 (32-bit and 64-bit)

  • Windows 8.1 (32-bit and 64-bit)

  • Windows 7 (32-bit and 64-bit)

  • Windows Server 2008 R2 (64-bit)

Note  NI-RFmx CDMA2k 2.1 does not support Windows Server non-R2 editions.
NI recommends that you have the most recent service pack for your operating system installed.

Minimum System Requirements

  • Processor—Intel i3 or equivalent

  • RAM—2 GB*

  • Microsoft Internet Explorer 5.5 or later

  • A screen resolution of 1,300 x 700 with 256 colors

  • Windows 10/8.1/7, with all available critical updates and service packs

  • Microsoft .NET Framework 4.0**

*Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.
**Microsoft .NET Framework 4.0 is required for .NET support only.

Recommended System

  • Processor—Intel i5 or equivalent

  • RAM—4 GB*

  • Microsoft Internet Explorer 5.5 or later

  • A screen resolution of 1,300 x 700

  • Windows 10/8.1/7, with all available critical updates and service packs

  • Microsoft .NET Framework 4.0**

*Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.

**Microsoft .NET Framework 4.0 is required for .NET support only.

Application Development Environments (ADEs)

  • NI LabVIEW 2013 SP1 (32-bit and 64-bit) f6 patch, 2014 SP1 (32-bit and 64-bit) f3 patch, 2015 (32-bit and 64-bit) f1 patch

  • Microsoft Visual Studio 2010 SP1 or later

Note  NI-RFmx CDMA2k will not operate correctly without the service packs and patches previously mentioned.
Note  Install NI LabVIEW before you install NI-RFmx CDMA2k. To add support for ADEs installed after installing NI-RFmx CDMA2k, modify your NI-RFmx CDMA2k installation or relaunch the NI-RFmx CDMA2k installer.

Other Required Software

  • NI-RFSA 14.1 or later

Installed Software, Documentation, and Examples

  • <MSTUDIOVS2010DIR> is an alias for the following National Instruments file folder location:

    • Windows 10 (32-bit)/8.1 (32-bit)/7 (32-bit): Program FilesNational InstrumentsMeasurementStudioVS2010

    • Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit): Program Files (x86)National InstrumentsMeasurementStudioVS2010

  • <NIDir> is an alias for the following National Instruments file folder location:

    • Windows 10 (32-bit)/8.1 (32-bit)/7 (32-bit): Program FilesNational Instruments

    • Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit): Program Files (x86)National Instruments

  • <NIDocDir> is an alias for the following National Instruments file folder location:

    • Windows 10/8.1/7: UsersPublicDocumentsNational Instruments

  • <SYSDIR> is an alias for the following file folder location:

    • 32-bit DLL: windowsSysWow64

    • 64-bit DLL: windowssystem32

    • Windows 10 (32-bit)/8.1 (32-bit)/7 (32-bit): windowssystem32

    • Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit)

File Locations

ItemInstalled Location on Windows 10/8.1/7
Version Compatibility Checker<NIDir>RFmx iRFmxCompatibility_Checker.exe
DLLs<SYSDIR>
Header files
<NIDir>SharedExternalCompilerSupportCinclude
Import Library files
Windows 10 (32-bit)/8.1 (32-bit)/7 (32-bit):<NIDir>SharedExternalCompilerSupportCinclude
Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit):

  • 32-bit: <NIDir>SharedExternalCompilerSupportClib32msvc

  • 64-bit: <NIDir>SharedExternalCompilerSupportClib64msvc

C, .NET
Examples<NIDocDir>RFmxCDMA2kExamples
LabVIEW
Examples<NIDir>LabVIEW <version>examplesRFmxCDMA2k
.NET Class Libraries
Assemblies<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.Cdma2kMX.Fx40.dll
<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.InstrMX.Fx40.dll
<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.Common.dll

Executable

Select Start»All Programs»National Instruments»NI-RFmx CDMA2k»NI-RFmx CDMA2k Measurement Interactive Panel to launch the NI-RFmx CDMA2k Measurement Interactive Panel.

Documentation

Documentation for NI-RFmx CDMA2k is located at Start»All Programs»National Instruments»NI-RFmx CDMA2k»NI-RFmx CDMA2k Documentation. The documentation set is composed of the following documents.
DocumentFormatDescription
NI-RFmx CDMA2k HelpHTML/Windows HelpInformation about NI-RFmx CDMA2k. This help file is an HTML version of a traditional user manual that includes the following information:

  • An introduction to NI-RFmx CDMA2k

  • How to get started with application development

  • A complete reference for all NI-RFmx CDMA2k programming functions

NI-RFmx CDMA2k 2.1 ReadmeHTML (this document)Information about supported hardware, supported operating systems, and legal notices.

Accessing VIs and Functions

NI-RFmx CDMA2k palette VIs are available from the Functions»Measurement I/O»NI-RFmx»CDMA2k palette.

Finding Examples

You can access all the installed NI-RFmx CDMA2k examples at Start»All Programs»National Instruments»NI-RFmx CDMA2k»NI-RFmx CDMA2k Examples.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.

Uninstalling/Modifying NI-RFmx CDMA2k

For Windows 7, complete the following steps:

  • Launch the Control Panel by selecting Start»Control Panel.

  • Double-click Programs and Features.

  • Select National Instruments Software.

  • Click the Uninstall/Change button.

  • Select NI-RFmx CDMA2k 2.1 from the dialog box that appears.

  • Click Remove to uninstall the product; click Modify to change the components that are installed.

For Windows 10/8.1, complete the following steps:

  • Right-click on the Start screen.

  • Select All apps, and launch the Control Panel.

  • Select Programs»Programs and Features.

  • Select National Instruments Software.

  • Click the Uninstall button.

  • Select NI-RFmx CDMA2k 2.1 from the dialog box that appears.

  • Click Remove to uninstall the product; click Modify to change the components that are installed.

As part of the NI-RFmx CDMA2k 2.1 installation, the following software is installed. To completely remove the NI-RFmx CDMA2k 2.1 installation from your system, you must also remove the following package:

  • NI-RFmx CDMA2k Runtime 2.1 for LabVIEW

  • NI-RFmx CDMA2k Runtime 2.1 for C/.NET

  • NI-RFmx CDMA2k Runtime 2.1 (64-bit) for C/.NET

Note  Do not attempt to uninstall by manually deleting files.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI-RFmx CDMA2k 2.1 Known Issues at ni.com for an up-to-date list of known issues in NI-RFmx CDMA2k 2.1.

Bug Fixes

The following items are changes in NI-RFmx CDMA2k 2.1 from NI-RFmx CDMA2k 2.0.
IDFixed Issue
554076Fixed an issue with the starting reference level used in auto level when preamp is enabled on NI PXIe-5668R.
562712Fixed an issue with fetching the ModAcc results from the property node when traces are disabled.

Increasing Available Memory For Your Application

When developing memory intensive applications, you may encounter memory limits because 32-bit Windows applications utilize only 2 GB of memory by default. To expand the amount of memory an application can utilize, you can configure the executable to be large address aware to gain access to up to 3 GB of memory on a 32-bit Windows operating system and up to 4 GB of memory on a 64-bit Windows operating system.
For more information, refer to Memory Limits for Windows and Windows Server Releases on the Microsoft website.
Note  LabVIEW 8.5 and later are large address aware. For more information about LabVIEW memory usage, refer to KB 2HDEH9DT, How Much Memory can LabVIEW 32-bit or 64-bit Use?.
In TestStand 2013 and later, the Large Address Aware flag is enabled by default for the TestStand Sequence Editor and TestStand User Interfaces. For more information, refer to KB 5ZREUK2G, Using the Large Address Aware Flag With TestStand Applications.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Using NI Software with Microsoft Windows 8.1

When you install National Instruments software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
Note  NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.1. You can launch NI MAX either from the Apps view or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary.
Current ApplicationIcon LocationPin to Action
Windows 8.1 DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
Windows 8.1 DesktopStart screenRight-click application and select Pin to Start
Windows 8.1 Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view click the down arrow on the bottom left of the screen (Windows 8.1).
For more information about NI support for Windows 8.1, visit ni.com/windows8.


Legal Information

Copyright
© 2015–2016 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

  • Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

  • EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

  • Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
375524B-01


首页
84162741QQ
联系