October 2021
This file contains important information about the RFmx CDMA2k, including system requirements, and installation instructions.
You can find more release information on ni.com.

• RFmx CDMA2k Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
• RFmx CDMA2k Manuals: New features, behavior changes, and other documentation
  

  
  

Overview
New Features
Supported Hardware
System Requirements
Supported Operating Systems
Application Software Support
Installation Instructions
Installed Software
File Locations
Executable
Accessing the API
Accessing the Help
Finding Examples
Product Security and Critical Updates
Behavior Changes
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Legal Information

RFmx CDMA2k is an application software that provides simple access to the most advanced optimization techniques such as multimeasurement parallelism and multi-DUT measurements. The result is fast, high-quality measurements with minimal software development effort. Using this software, you can perform physical-layer analysis on CDMA2k cellular signals including MODACC, ACPR, CHP, OBW, QEVM, CDA, SlotPower, SlotPhase, and SEM. RFmx CDMA2k is completely interoperable with all RFmx APIs.

RFmx CDMA2k 21.3 includes the following new features:

• Support for LabVIEW 2021 (32-bit and 64-bit)
  

  
  

RFmx CDMA2k 20.0 includes the following new features:

• Support for LabVIEW 2020 (32-bit and 64-bit)
• Support for Start trigger, Advance trigger, and Events in RFInstr
• Support to configure RFInstr properties in the context of a signal configuration
• Support for PXIe-5841 with PXIe-5655
• Support for FFT Overlap in the Sequential FFT method of the ACP measurement
  

  
  

RFmx CDMA2k 19.1 includes the following new features:

• Support for PXIe-5841
  

  
  

The following hardware products are supported in all operating systems listed in the Supported Operating Systems section.

• PXIe-5663
• PXIe-5663E
• PXIe-5665
• PXIe-5668
• PXIe-5668 with PXIe-5698
  

  
  

Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help.

• PXIe-5820
• PXIe-5840
• PXIe-5841
• PXIe-5644
• PXIe-5645
• PXIe-5646
• PXIe-5841 with PXIe-5655
  

  
  

Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.

RFmx CDMA2k has the following requirements:

• Processor—1 GHz 64-bit (x64) processor
• 4 GB RAM *
• A screen resolution of 1,024 x 768
• Windows 10, with all available critical updates and service packs
  

  
  

* Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.

RFmx CDMA2k 21.3 supports the following 64-bit operating systems:

• Windows 10
• Windows Server 2019
• Windows Server 2016
  

  
  

Note    RFmx CDMA2k no longer supports Windows Vista/XP/7/8.1, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. RFmx CDMA2k 21.3 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use RFmx CDMA2k 21.3 to an unsupported OS. Additionally, after installing RFmx CDMA2k 21.3, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For detailed information about NI operating system support, visit http://www.ni.com/r/win32bitsupport.

RFmx CDMA2k supports the following application software versions, including service packs. You should install application software, such as LabVIEW or Microsoft Visual Studio®, before installing RFmx CDMA2k. If you are not using NI application software, refer to Microsoft Visual Studio Support.

• NI-RFSA 14.1 or later
• NI-RFSA 17.1 or later (for initializing debug session when "using breakpoints in C/C++/.NET application" is selected)
  

  
  

If you are using the RFmx CDMA2k .NET Class Library, .NET Framework 4.0 (minimum) is required. The RFmx CDMA2k .NET Class Library can be used with Visual C# or Visual Basic .NET in any Visual Studio version that can target .NET Framework 4.0 or .NET Framework 4.5.

Download the RFmx CDMA2k installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
Notes

• If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.
• Use the serial number that is included with your software to activate RFmx CDMA2k. For more information on RFmx CDMA2k activation, refer to National Instruments Software Activation.
  

  
  

• <MSTUDIOVS2010DIR> is an alias for the following National Instruments file folder location:

  
  

• Program Files (x86)National InstrumentsMeasurementStudioVS2010
  

  
  

• <NIDir> is an alias for the following National Instruments file folder location:

  
  

• Program Files (x86)National Instruments 
  

  
  

• <SYSDIR> is an alias for the following file folder location:
  

  
  

• WindowsSysWOW64 for 32-bit programs and windowssystem32 for 64-bit programs
  

  
  

Select Start » National Instruments » RFmx CDMA2k » RFmx Soft Front Panel to launch the RFmx Soft Front Panel (64-bit).

RFmx CDMA2k palette VIs are available from the Functions » Measurement I/O » NI-RFmx » CDMA2K palette.

Documentation for RFmx CDMA2k is located at Start » National Instruments » RFmx CDMA2k » RFmx CDMA2k Documentation. The documentation set is composed of the following documents.

You can access all the installed RFmx CDMA2k examples at Start » National Instruments » RFmx CDMA2k » RFmx CDMA2k Examples.
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.

Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.

The following are the behavior changes in RFmx RFmx CDMA2k 20.7 from RFmx RFmx CDMA2k 20.6.

• Obsoleted the RFmxInstr Configure Automatic SG SA Shared LO API and the RFmxInstr Automatic SG SA Shared LO property. Use RFmxInstr LO Source property with Automatic_SG_SA_Shared value instead.
  

  
  

The following items are behavior changes in RFmx CDMA2k 19.1 from RFmx CDMA2k 19.0.

• Obsoleted RFmxCDMA2k Analyze (IQ) and RFmxCDMA2k Analyze (Spectrum) APIs. Use RFmxCDMA2k Analyze (IQ, 1 Wfm) and RFmxCDMA2k Analyze (Spectrum, 1 Wfm) APIs instead
  

  
  

The following items are behavior changes in RFmx CDMA2k 19.0 from RFmx CDMA2k 3.0.

• Dropped support for LabVIEW 2015
• Deprecated the Recommended I/Q Measurement Bandwidth property in RFInstr
  

  
  

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Copyright
© 2015–2021 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
• EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
• Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
  

  
  

U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
375524R-01

• 上篇：NI RFmx CDMA2000 21.3 x64Win10 32/64bitENG完整版下载
• 下篇：NI RFmx CDMA2000 21.3 x64Win10 64bitENG运行版下载
• 标签：NI RFmx CDMA2000 21.3cdmaOneCDMA2000 1xRTTRFmx Waveform CreatorRFmx CDMA2000生成和分析CDMA2000蜂窝信号