Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html
NI-RFMX Demod/Analog Modulation/Digital Modulation 21.8.2 Full x64Win10 32/64bitEng NI-RFmx解调/模拟调制/数字调制21.8.2完整版
RFmx模拟调制
RFmx模拟调制为测试应用提供模拟调制信号的生成和分析。
RFmx Analog Modulation是运行在RFmx解调器内的应用软件，它与RFmx Analog Modulation一起安装。该软件可扩展NI RF仪器对于模拟调制信号生成和分析的能力。您可以使用该软件，通过对频率/相位偏移、模拟调制深度、频率/相位偏差等的测量，分析AM、FM、PM和FM的立体声信号。此外，您可以通过应用去加重和音频滤波器来分析解调后的信号波形、频谱和失真。您可以通过交互式软件前面板进行和调试测量，利用随附的RFmx Waveform Creator创建和回放开放的、未锁定的波形，并利用性能优化的API加快自动测试。
RFmx数字调制
RFmx数字変調提供测试应用数字変調信号生成和分析。
RFmx Digital Modulation是RFmx Demod内运行的应用软件，该软件与RFmx Digital Modulation一起安装。该软件可扩展NI RF仪器对于数字调制信号的生成和分析能力。您可以使用这个软件，通过对误差矢量幅度(EVM)、调制误差率(MER)、rho、振幅下降等的测量，分析ASK、FSK、PSK和QAM信号。此外，您可以分析同步化和应用化的灵活均衡、脉冲形状过滤、测量过滤和损伤补偿的解调比特。您可以通过交互式软件前面板进行和调试测量，利用随附的RFmx Waveform Creator创建和回放开放的、未锁定的波形，并利用性能优化的API加快自动测试。
发布日期：2022/6/30
包含的版本：21.8.2完整版
受支持的操作系统：
Windows 10 64-bit
Windows Server 2016 64-bit
Windows Server 2019 64-bit
语言：English
应用程序位数：32/64位
校验和：
文件大小: 796166144 字节 (759.28 MB)
修改日期: 2022-06-30 09:47
MD5: b35ebf6c343f3f7d9b9684e9e4e0270f
SHA1: 0eb81c301c84c61cfbc9bad1d6fd1e40e0bbea8d
SHA256: 829ad19a863f6a69ae7c5a146455a972ae40080e7e24d54170dfc018c148e354
CRC32: b5fcf099
NI官方下载和百度网盘下载地址：
注册登录视觉论坛账号，购买附件查看下载地址
NI-RFMX Demod/Analog Modulation/Digital Modulation 21.8.2 Full x64Win10 32/64bitEng NI-RFmx解调/模拟调制/数字调制21.8.2完整版
http://pcmv.cn/thread-28957-1-1.html?fromuid=9
(出处: 机器视觉论坛)
RFmx Demod 21.8.2 Readme
May 2022
This file contains important information about the RFmx Demod, including system requirements, and installation instructions.
You can find more release information on ni.com.
RFmx Analog Modulation Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
RFmx Digital Modulation Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
RFmx Analog Modulation Manuals: New features, behavior changes, and other documentation
RFmx Digital Modulation Manuals: New features, behavior changes, and other documentation
Overview
New Features
Supported Hardware
System Requirements
Supported Operating Systems
Application Software Support
Installation Instructions
Installed Software
File Locations
Executable
Accessing the API
Accessing the Help
Finding Examples
Product Security and Critical Updates
Behavior Changes
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Legal Information
Overview
RFmx Demod provides a highly optimized RF measurement experience. Use RFmx Demod to perform demodulation measurements on analog and digital modulation signal formats, including QAM and ASK.
New Features
RFmx Demod 21.3 includes the following new features:
RFmx Demod 20.6 includes the following new features:
RFmx Demod 20.0 includes the following new features:
Support for LabVIEW 2020 (32-bit and 64-bit)
Support for Start trigger, Advance trigger, and Events in RFInstr
Support to configure RFInstr properties in the context of a signal configuration
Support for PXIe-5841 with PXIe-5655
Supported Hardware
Visit NI Hardware and Operating System Compatibility to view driver, desktop operating system, and real-time operating system support for individual hardware devices.
To view information for your device:
Select your hardware model in the dropdown list on the page to view compatibility information for your device.
Type your hardware model number in the dropdown list on the web page to filter the list of available devices.
Note: Some compatibility information may only be available in the archive attached to the NI Hardware and Operating System Compatibility page. For historic driver and OS support information, refer to the readme for the relevant driver version.
System Requirements
RFmx Demod has the following requirements:
Processor—1 GHz 64-bit (x64) processor
4 GB RAM *
A screen resolution of 1,024 x 768
Windows 10, with all available critical updates and service packs
* Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.
Supported Operating Systems
RFmx Demod 21.8.2 supports the following 64-bit operating systems:
Windows 10
Windows Server 2019
Windows Server 2016
Note RFmx Demod no longer supports Windows Vista/XP/7/8.1, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. RFmx Demod 21.8.2 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use RFmx Demod 21.8.2 to an unsupported OS. Additionally, after installing RFmx Demod 21.8.2, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
Application Software Support
RFmx Demod supports the following application software versions, including service packs. You should install application software, such as LabVIEW, LabWindows/CVI or Microsoft Visual Studio®, before installing RFmx Demod. To add support for application software installed after installing RFmx Demod modify your RFmx Demod installation or launch the RFmx Demod installer again. If you are not using NI application software, refer to Microsoft Visual Studio Support.
| Application Software | Versions Supported by RFmx Demod |
| LabVIEW | 2018 SP1 f4 patch, 2019 SP1 f3 patch, 2020 SP1, or 2021 |
| LabWindows™/CVI™ | 2017 or later |
Required Software
NI-RFSA 14.1 or later
NI-RFSG 14.0.1 or later
Microsoft Visual Studio Support
If you are using the RFmx Demod .NET Class Library, .NET Framework 4.0 (minimum) is required. The RFmx Demod .NET Class Library can be used with Visual C# or Visual Basic .NET in any Visual Studio version that can target .NET Framework 4.0.
Installation Instructions
NI installs RFmx Demod using NI Package Manager. If you do not already have NI software installed, RFmx Demod installs NI Package Manager to handle the installation of your NI software. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
Notes
If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
RFmx Demod installs the following licensed products
Analog Modulation: This will enable demodulation support of Analog Modulation (AM), Frequency Modulation (FM), and Phase Modulation (PM).
Digital Modulation: This will enable demodulation support of Amplitude-Shift Keying (ASK), Frequency-Shift Keying (FSK), Minimum-Shift Keying (MSK), Phase-Shift Keying (PSK), and Quadrature Amplitude Modulation (QAM).
Notes
If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.
Use the serial number that is included with your software to activate RFmx Demod. For more information on RFmx Demod activation, refer to National Instruments Software Activation.
Installed Software
<MSTUDIOVS2010DIR> is an alias for the following National Instruments file folder location:
<NIDir> is an alias for the following National Instruments file folder location:
<SYSDIR> is an alias for the following file folder location:
File Locations
| Item | Installed Location |
| Version Compatibility Checker | <NIDir>RFmx
iRFmxCompatibility_Checker.exe |
| Debug Configuration Utility | <NIDir>RFmx
iRFmxDebugConfigurationUtility.exe |
| DLLs | <SYSDIR> |
| Header files | <NIDir> SharedExternalCompilerSupportCinclude |
| Import Library files (64-bit) | |
| .NET Class Libraries |
| Assemblies | <MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.DemodMx.Fx40.dll
<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.InstrMX.Fx40.dll
<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.Common.dll |
Executable
Select Start » National Instruments» RFmx Demod Measurement Interactive Panel to launch the RFmx Demod Measurement Interactive Panel.
Accessing the API
RFmx Demod palette VIs are available from the Functions » Measurement I/O » RFmx » Demod palette.
Accessing the Help
Documentation for RFmx Demod is located at Start » National Instruments » RFmx Demod » RFmx Demod Documentation. The documentation set is composed of the following documents.
| Document | Format | Description |
| RFmx Demod Help | HTML/Windows Help | Contains primary help content for RFmx Demod. This help file is an HTML version of a traditional user manual that includes the following information:An introduction to RFmx Demod How to get started with application development A complete reference for all RFmx Demod programming functions and VIs
|
| RFmx Demod 21.8.2 Readme | HTML (this document) | Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices. |
Finding Examples
You can access all the installed RFmx Demod examples at Start » National Instruments » RFmx Demod » RFmx Demod Examples.
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.
Behavior Changes
The following items are behavior changes in RFmx Demod 20.7 from RFmx Demod 20.6.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
Using NI Software with Microsoft Windows 10
For more information about NI support for Windows 10, refer to NI Product Compatibility for Microsoft Windows 10.
Legal Information
Copyright
© 2014–2022 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
374855Y-01
