Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活,以下链接可下载:
NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI-RFMX demod 21.5 Runtime Win64Eng NI-RFmx模拟调制/数字调制21.5运行版64位
RFmx模拟调制
RFmx模拟调制为测试应用提供模拟调制信号的生成和分析。
RFmx Analog Modulation是运行在RFmx解调器内的应用软件,它与RFmx Analog Modulation一起安装。该软件可扩展NI RF仪器对于模拟调制信号生成和分析的能力。您可以使用该软件,通过对频率/相位偏移、模拟调制深度、频率/相位偏差等的测量,分析AM、FM、PM和FM的立体声信号。此外,您可以通过应用去加重和音频滤波器来分析解调后的信号波形、频谱和失真。您可以通过交互式软件前面板进行和调试测量,利用随附的RFmx Waveform Creator创建和回放开放的、未锁定的波形,并利用性能优化的API加快自动测试。
RFmx数字调制
RFmx数字変調提供测试应用数字変調信号生成和分析。
RFmx Digital Modulation是RFmx Demod内运行的应用软件,该软件与RFmx Digital Modulation一起安装。该软件可扩展NI RF仪器对于数字调制信号的生成和分析能力。您可以使用这个软件,通过对误差矢量幅度(EVM)、调制误差率(MER)、rho、振幅下降等的测量,分析ASK、FSK、PSK和QAM信号。此外,您可以分析同步化和应用化的灵活均衡、脉冲形状过滤、测量过滤和损伤补偿的解调比特。您可以通过交互式软件前面板进行和调试测量,利用随附的RFmx Waveform Creator创建和回放开放的、未锁定的波形,并利用性能优化的API加快自动测试。
21.5 x64 RTE
NI官方下载和百度网盘下载地址:
NI-RFMX demod 21.5 Runtime Win64Eng NI-RFmx模拟调制/数字调制21.5运行版64位
http://pcmv.cn/thread-28239-1-1.html?fromuid=9
(出处: 机器视觉论坛PCMV.CN)
RFmx Demod 21.5 Readme
RFmx Analog Modulation Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
RFmx Digital Modulation Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
RFmx Analog Modulation Manuals: New features, behavior changes, and other documentation
RFmx Digital Modulation Manuals: New features, behavior changes, and other documentation
[url=]Overview[/url]
[url=]New Features[/url]
Support for LabVIEW 2021 (32-bit and 64-bit)
Support for PXIe-5832
Support for LabVIEW 2020 (32-bit and 64-bit)
Support for Start trigger, Advance trigger, and Events in RFInstr
Support to configure RFInstr properties in the context of a signal configuration
Support for PXIe-5841 with PXIe-5655
[url=]Supported Hardware[/url]
Vector Signal Analyzers
PXIe-5663
PXIe-5663E
PXIe-5665
PXIe-5668
PXIe-5668 with PXIe-5698
Vector Signal Transceivers
PXIe-5644
PXIe-5645
PXIe-5646
PXIe-5820
PXIe-5830
PXIe-5831
PXIe-5832
PXIe-5841
PXIe-5840
PXIe-5841 with PXIe-5655
[url=]System Requirements[/url]
Processor—1 GHz 64-bit (x64) processor
4 GB RAM *
A screen resolution of 1,024 x 768
Windows 10, with all available critical updates and service packs
[url=]Supported Operating Systems[/url]
Windows 10
Windows Server 2019
Windows Server 2016
[url=]Application Software Support[/url]
Application Software | Versions Supported by RFmx Demod |
LabVIEW | 2018 SP1 f4 patch, 2019 SP1 f3 patch, 2020 SP1, or 2021 |
LabWindows™/CVI™ | 2017 or later |
Required Software
NI-RFSA 14.1 or later
NI-RFSG 14.0.1 or later
[url=]Microsoft Visual Studio Support[/url]
[url=]Installation Instructions[/url]
If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
RFmx Demod installs the following licensed products
Analog Modulation: This will enable demodulation support of Analog Modulation (AM), Frequency Modulation (FM), and Phase Modulation (PM).
Digital Modulation: This will enable demodulation support of Amplitude-Shift Keying (ASK), Frequency-Shift Keying (FSK), Minimum-Shift Keying (MSK), Phase-Shift Keying (PSK), and Quadrature Amplitude Modulation (QAM).
If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.
Use the serial number that is included with your software to activate RFmx Demod. For more information on RFmx Demod activation, refer to National Instruments Software Activation.
[url=]Installed Software[/url]
<MSTUDIOVS2010DIR> is an alias for the following National Instruments file folder location:
Program Files (x86)National InstrumentsMeasurementStudioVS2010
<NIDir> is an alias for the following National Instruments file folder location:
Program Files (x86)National Instruments
<SYSDIR> is an alias for the following file folder location:
WindowsSysWOW64 for 32-bit programs and windowssystem32 for 64-bit programs
File Locations
Item | Installed Location |
Version Compatibility Checker | <NIDir>RFmx iRFmxCompatibility_Checker.exe |
Debug Configuration Utility | <NIDir>RFmx iRFmxDebugConfigurationUtility.exe |
DLLs | <SYSDIR> |
Header files | <NIDir> SharedExternalCompilerSupportCinclude |
Import Library files (64-bit) |
|
.NET Class Libraries | |
Assemblies | <MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.DemodMx.Fx40.dll <MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.InstrMX.Fx40.dll <MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.Common.dll |
Executable
[url=]Accessing the API[/url]
Accessing the Help
Document | Format | Description |
RFmx Demod Help | HTML/Windows Help | Contains primary help content for RFmx Demod. This help file is an HTML version of a traditional user manual that includes the following information:
|
RFmx Demod 21.5 Readme | HTML (this document) | Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices. |
Finding Examples
[url=]Product Security and Critical Updates[/url]
[url=]Behavior Changes[/url]
Obsoleted RFmxInstr Configure Automatic SG SA Shared LO API and RFmxInstr Automatic SG SA Shared LO property. Use RFmxInstr LO Source property with Automatic_SG_SA_Shared value instead.
Dropped support for Cleaner Spectrum property on PXIe-5830 and PXIe-5831 devices
Obsoleted RFmxDemod Analyze (IQ) API. Use RFmxDemod Analyze (IQ, 1 Wfm) API instead
Dropped support for LabVIEW 2015
Deprecated the Recommended I/Q Measurement Bandwidth property in RFInstr
[url=]Automating the Installation of NI Products[/url]
[url=]Using NI Software with Microsoft Windows 10[/url]
Legal Information
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.