石鑫华视觉
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html
NI LabVIEW 2018 SP1 Full Linux64Eng LV2018SP1Linux系统完整版下载
本文件为ISO文件，集成了LabVIEW2018SP1 Pro Linux 完整版，可在Linux系统中安装使用（使用范围参考下面的Readme）。完整版和专业版比较，少了应用生成功能、VI分析器等功能，具体请查看自述文件。
LabVIEW 2018 SP1 Linux完整版
发布日期：2018/12/3
受支持的操作系统：
CentOS
Scientific Linux
RedHat
openSUSE
语言：英文
应用程序位数：64位
校验和：
文件名: 2018SP1LV-LinuxFull.iso
文件大小: 1092052992 字节 (1.02 GB)
修改日期: 2023-03-09 11:54
MD5: 03052a91562680a0b112701f7e4bf7cf
SHA1: 44b7c9ceea11f5739349d28c0b38d20d38944488
SHA256: 2a0ad9f2f327f06564ac0d91ac4f35198a512259b9562ee6669938ef8ff71a7c
CRC32: 0783165a
百度网盘下载：
请注册视觉论坛会员登录后购买附件下载查看
NI LabVIEW 2018 SP1 Full Linux64Eng LV2018SP1Linux系统完整版下载
http://pcmv.cn/thread-27063-1-1.html?fromuid=9
(出处: 机器视觉论坛)
LabVIEW 2018 Service Pack 1 Media Readme for macOS/Linux
September 2018
With the LabVIEW media for macOS/Linux, one installation gives you access to the LabVIEW Development System and nearly all the LabVIEW for macOS/Linux modules and toolkits. This file contains important information about the LabVIEW 2018 Service Pack 1 (SP1) media for macOS/Linux, including supported operating systems and installation instructions.
Supported Operating Systems
Products Included on the LabVIEW Media for macOS/Linux
Installation Instructions
Product Security and Critical Updates
Accessing the Help
Legal Information
Supported Operating Systems
You can run the LabVIEW for macOS/Linux installer on the following operating systems:
(macOS) macOS 10.12 or 10.13
(Linux)
openSUSE LEAP 15.0
openSUSE LEAP 42.2
openSUSE LEAP 42.3
Red Hat Enterprise Linux Desktop + Workstation 6.x
Red Hat Enterprise Linux Desktop + Workstation 7.x
CentOS 7
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW 2018 SP1.
Products Included on the LabVIEW Media for macOS/Linux
The LabVIEW media for macOS/Linux includes the following products. You can refer to the readme for each product in the Product ReadMes directory for information including system requirements, known issues, and bug fixes.
LabVIEW Full and Professional Development Systems
Control Design and Simulation Module1
MathScript RT Module2
VI Analyzer Toolkit3
Application Builder3
1 The Control Design and Simulation Module does not support the System Identification VIs, System Identification Assistant, and Control Design Assistant.
2 The MathScript RT Module does not support the libraries class of MathScript RT Module functions.
3 The VI Analyzer Toolkit and Application Builder install with the LabVIEW Professional Development System. For the LabVIEW Full Development System, you can purchase and install the VI Analyzer Toolkit and Application Builder with their own separate media. Follow the installation instructions in this readme to install these products.
Installation Instructions
You can install your LabVIEW products—including the modules and toolkits—using the LabVIEW 2018 SP1 media for macOS/Linux.
To request additional LabVIEW media, refer to the NI website.
Installing the LabVIEW Development System
Complete the following steps to install the LabVIEW Development System.
(macOS)
Insert the LabVIEW media for macOS/Linux and open LabVIEW2018SP1-Pro.dmg located under the root.
Insert the LabVIEW media for macOS/Linux. Mount lv2018SP1pro-linux.iso located under the # mkdir -p /mnt/lv2018SP1
Use the following mount command to mount the ISO file:
# cd /mnt/lv2018SP1
On the mounted media, to run the installation script, enter the following command:
sh ./UNINSTALL
Installing the Control Design and Simulation Module
Complete the following steps to install the Control Design and Simulation Module.
(macOS)
Insert the LabVIEW media for macOS/Linux and double-click LabVIEW Add-ons/Control Design and Simulation directory.
Open macOS directory.
Select Continue to run a program to determine if the Control Design and Simulation Module can be installed on your system.
Follow the instructions that appear on the screen and continue to the Installation Type screen.
In the Installation Type screen, select Change Install Location to select the location where a compatible version of LabVIEW is installed. Otherwise, the installation will not complete.
After you select the installation location, continue to follow the instructions that appear on the screen.
(Linux)
Log into the system as CD&Sim2018.iso. Refer to the Installing the LabVIEW Development System section to mount an ISO image on Linux.
On the mounted media, find the Control Design and Simulation Module installer in the sh ./INSTALL
To uninstall the Control Design and Simulation Module on Linux, enter the following command:
MathScript2018.iso located under the NI LabVIEW 2018 MathScript RT Module 64-bit.pkg located under the root.
Insert the LabVIEW media for macOS/Linux. Mount Linux directory.
To run the installation script, enter the following command:
sh ./UNINSTALL
Installing the VI Analyzer Toolkit
The VI Analyzer Toolkit installs with the LabVIEW Professional Development System. Refer to the Installing the LabVIEW Development System section to install the LabVIEW Professional Development System.
If you use the LabVIEW Full Development System, refer to the LabVIEW VI Analyzer Toolkit Readme to install the VI Analyzer Toolkit.
Installing the Application Builder
The Application Builder installs with the LabVIEW Professional Development System. Refer to the Installing the LabVIEW Development System section to install the LabVIEW Professional Development System.
If you use the LabVIEW Full Development System, complete the following steps to install the Application Builder.
(macOS)
Insert the LabVIEW Application Builder media and open macOS directory.
Select Continue to run a program to determine if the Application Builder can be installed on your system.
Follow the instructions that appear on the screen and continue to the Installation Type screen.
In the Installation Type screen, select Change Install Location to select the location where a compatible version of LabVIEW is installed. Otherwise, the installation will not complete.
After you select the installation location, continue to follow the instructions that appear on the screen.
(Linux)
Log into the system as lv2018SP1ab-linux.iso located under the sh ./INSTALL
To uninstall the Application Builder on Linux, enter the following command:
<National Instruments>_Legal Information and <National Instruments>SharedMDFLegallicense directory.
Review <font face="" "="" style="margin: 0px; padding: 0px; overflow-wrap: break-word;"><National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.