Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html
NI LabVIEW 2012SP1 Win32ENG 32位LV2012SP1英文版下载
百度云盘下载:
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看
NI官方下载地址:
请购买附件下载查看
NI LabVIEW 2012SP1 Win32ENG 32位LV2012SP1英文版下载
http://pcmv.cn/thread-498-1-1.html?fromuid=9
(出处: 机器视觉论坛)
LabVIEW 2012 Service Pack 1 Readme for Windows
System Requirements
Windows | Run-Time Engine | Development Environment |
Processor | Pentium III/Celeron 866 MHz or equivalent | Pentium 4M or equivalent |
RAM | 256 MB | 1 GB |
Screen Resolution | 1024 x 768 Pixels | 1024 x 768 Pixels |
Operating System | Windows 8/7/Vista (32-bit and 64-bit) Windows XP SP3 (32-bit) Windows Server 2003 R2 (32-bit) Windows Server 2008 R2 (64-bit) | Windows 8/7/Vista (32-bit and 64-bit) Windows XP SP3 (32-bit) Windows Server 2003 R2 (32-bit) Windows Server 2008 R2 (64-bit) |
Disk Space | 353 MB | 3.67 GB (includes default drivers from the NI Device Drivers DVD) |
Color Palette | N/A | LabVIEW and the LabVIEW Help contain 16-bit color graphics. LabVIEW requires a minimum color palette setting of 16-bit color. |
Temporary Files Directory | N/A | LabVIEW uses a directory for storing temporary files. National Instruments recommends that you have several megabytes of disk space available for this temporary directory. |
Adobe Reader | N/A | You must have Adobe Reader installed to search PDF versions of all LabVIEW manuals. |
Note The following list describes restrictions for using LabVIEW on Windows:
|
Installation Instructions
LabVIEW Installation Guide—Includes information about installing LabVIEW, modules and toolkits, drivers, and hardware.
LabVIEW Upgrade Notes—Includes information about protecting existing VIs and projects before you install a new version of LabVIEW, as well as upgrade and compatibility issues and a complete list of new features in LabVIEW 2012 and LabVIEW 2012 SP1.
How to Use NI Software with Microsoft Windows 8
Using NI Launcher
Note Unlike previous versions of Microsoft Windows, MAX does not appear as a desktop shortcut. You can launch MAX either from the Start screen or from within NI Launcher. |
Pinning Frequently Used Applications
Current Application | Icon Location | Pin to Action |
Windows 8 Desktop | Desktop Taskbar | Right-click application and select Pin to Taskbar |
Windows 8 Desktop | Start screen | Right-click application and select Pin to Start |
Windows 8 Start screen | Desktop Taskbar | Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen |
Finding All Programs
Known Issues
LabVIEW 2012 SP1 (64-bit)
Supported Hardware
Supported Modules
Additions to the LabVIEW Help
Because LabVIEW 2012 SP1 may apply different compiler optimizations on different machines, you may need to perform additional steps to guarantee that a built application contains the same binary contents when built on different machines. Refer to the National Instruments website for more information about reproducing builds in LabVIEW 2012 SP1.
Bug Fixes
ID | Fixed Issue |
375494 | Improved update rate of front panel control value references |
373305 | Property: Mouse for 2D Picture controls returns incorrect values after using Invoke Method: Reinitialize to Default on the 2D Picture control |
373150 | Error code 3 when running LabVIEW 64-bit applications using NI_AALBase.lvlib, that were installed with installers built in 64-bit LabVIEW Application Builder |
371714 | Slow load time when adding a VI to the Exported VIs List for a DLL |
371651 | LabVIEW Source Control prompts to add vi.lib or instr.lib to source control even if they are to be excluded |
370957 | Specific type of cluster sent over the network may produce incorrect results |
370578 | LabVIEW User Interface responsiveness decreases on Mac OS when many VIs are loaded into memory |
370259 | Custom Waveform Graphs display NaN values incorrectly |
368875 | Slow load and close time for large Application Build specifications |
368466 | Plot visibility check box cannot be toggled for plot 0 on an XY Graph |
368396 | Certain applications built with Application Builder fail to launch |
368000 | Using Property: Owner to get an owning cluster's reference on the cluster's sub-controls returns incorrect value if the sub-control reference came from Property: Controls[] of the owning cluster |
367463 | References returned by Property: Controls[] of a pane containing type definitions are incorrect |
367428 | Private inlined VIs in a library cannot be built into packed project libraries |
366331 | Dynamic event registration of an array of controls fails with Error 1 |
365679 | LabVIEW 3D Picture control does not work with certain AMD video card drivers |
364799 | Selecting the Configure Web Application Server button immediately after preference page load results in 404 error |
364462 | Crash when changing value of typedef constant |
363945 | LabVIEW crashes if changing properties for multiple selected nodes by right-clicking the label |
362925 | Crash when dragging instance of Polymorphic VI from dialog to block diagram |
362576 | Invoke Method: Add File crashes LabVIEW if Path parameter contains too many characters |
362366 | Packed Project Library deployment fails on Real-Time targets |
362018 | Crash when loading some VIs, saved in a previous version of LabVIEW, into LabVIEW 2012 |
361857 | Certain network configurations cause slow loading of NationalInstruments.LabVIEW120.dll |
361839 | Boolean constant & string constants grow to length of label when cluster is type defined |
361666 | Tools»Actor Framework Message Maker... is missing in Linux |
357092 | Cannot use right-click shortcut menu to create items for the reference out terminal of Property Node (XML) or Invoke Node (XML) |
323332 | Control reference returned from CtlRef of an Event Structure is incorrect for Type Definitions |
312538 | Link between .NET Constructor Node and Assembly is sometimes lost even when .NET Assembly exists |
237213 | Event registration refnum of typedef does not update when typedef updates |
212136 | "The VI is not executable. The full development version of LabVIEW is required to fix the errors" dialog on a built app |
184689 | LabVIEW UI is less responsive when displaying NaN values on 3D Surface Graph |
366331—Dynamic event registration of an array of controls fails with Error 1
Open LabVIEW.
Select Tools»Advanced»Mass Compile to display the Mass Compile dialog box.
Navigate to the desired directory and click the Current Folder button.
Click the Mass Compile button to recompile all VIs in that directory with updates.
Click the Done button to return to LabVIEW.
Automating the Installation of NI Products
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Important Information
Notices are located in the <National Instruments> directories.
EULAs are located in the <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.