石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI LabVIEW 8.0 Professional and Device Driver 3CD Win32Eng LabVIEW8.0专业版开发系统和设备驱动

文章来源:石鑫华视觉网时间:2022-06-27 16:14:29 点击:229

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI LabVIEW 8.0 Professional and Device Driver 3CD Win32Eng LabVIEW8.0专业版开发系统和设备驱动

美国国家仪器LabVIEW 8.0 3CD Windows版，视觉论坛pcmv.cn珍藏版。NI不再提供老旧版本的下载服务或是SSP服务才可以下载，本论坛会收取一定的费用用于论坛日常维护。

3CD版，CD1为LabVIEW8.0安装文件，CD2、CD3为常规的驱动文件，如DAQ、VISA之类的。请根据需要选择是否需要安装。

百度云盘下载：
链接: 购买附件下载 
提取码: 请购买主题查看，压缩包需要解压密码，请关注论坛顶上微信公众号，回复“密码”获取

NI LabVIEW 8.0 Professional and Device Driver 3CD Win32Eng LabVIEW8.0专业版开发系统和设备驱动

http://pcmv.cn/thread-22665-1-1.html?fromuid=9

(出处: 机器视觉论坛)



CD2与CD3的设备驱动自述文件：
National Instruments Device Drivers ReadmeNovember 2005 Release

©]For patents covering National Instruments products, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your CD, or ni.com/patents.

Important Information Concerning NI-DAQ 8.0

NI-DAQ]Traditional NI-DAQ (Legacy) is an older driver with outdated application programming interfaces (APIs) for developing data acquisition, instrumentation, and control applications for older National Instruments DAQ devices. You should use Traditional NI-DAQ (Legacy) only in certain circumstances. Refer to the NI-DAQ Readme for an overview of the two NI-DAQ APIs, the advantages of NI-DAQmx, and more information about when to use Traditional NI-DAQ (Legacy), including a complete list of supported devices, operating systems, application software versions, and language versions. You can install the latest version of NI-DAQmx software, available at ni.com/downloads


Consult]For last-minute information on your National Instruments device driver software, refer to your product's readme file, as follows:

  • Data Acquisition

    • NI-DAQ 8.0

    • Traditional NI-DAQ 7.4.1 (Legacy)

  • Instrument Control

    • NI-488.2 2.4.3

    • NI-VISA 3.4

    • NI-Serial 1.8.1

    • IVI Compliance Package 2.3

  • Modular Instruments

    • NI-Switch 3.0

    • NI-DMM 2.4.6

    • NI-Scope 2.9.2

    • NI-FGEN 2.3.2

    • NI-HSDIO 1.4.1

  • Motion and Vision

    • NI-Motion 7.1

    • NI-IMAQ 3.5

  • Real-Time and Embedded

    • NI-488.2 2.4.3

    • NI-Serial 2.5.6

    • NI-IrDA 1.0.4

  • Industrial Communications

    • NI-CAN 2.3.1

    • NI-DNET 1.4.2

Installation Instructions

When]This installation requires one of the following Microsoft operating systems:

  • Windows XP

  • Windows 2000

This]Certain features in this installation have additional requirements.
FeatureAdditional System RequirementsNI Software Requirements
Visual C++ 2003 support for:

  • NI-DAQmx

  • NI-488.2

  • NI-VISA

  • IVI Compliance Package

NoneNational Instruments Measurement Studio VC++ 2003
.NET support for:

  • NI-DAQmx

  • NI-488.2

  • NI-VISA

Microsoft .NET Framework 1.1
LabWindows/CVI Support for:

  • NI-DAQmx

  • NI-CAN

  • NI-DNET

NoneLabWindows/CVI 7.0 or later

Other Installation Notes
If IVI Driver Toolset 1.1 is installed, you must uninstall it before installing IVI Compliance Package 2.3. Consult the IVI Compliance Package 2.0 Release Notes for more information.If you want to install these CDs from a network location, copy each of the CDs to a directory named after the volume of the CD. Place all of these directories in the same root directory to allow the installer to automatically locate any subsequent volumes necessary for the installation.If you are installing these CDs from a CD-ROM drive that is mapped to a network drive, when you are prompted for the second CD, you must insert the second CD and navigate up one directory in the browse dialog that appears to continue the installation.
Uninstallation Instructions

You can uninstall software that you installed from this CD by selecting National Instruments Software in the Windows Add/Remove Programs application.


首页
84162741QQ
联系