Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html
NI Vision Acquisition Software 18.5.1 2018SP1 Win32/64Eng 视觉采集软件VAS1851下载
VAS18.5.1版(VAS1851)为2019年2月15日发布(NI官方上说发布日期是2018.2.15,这个可能有笔误,从下载的压缩文件修改日期2019.2.8来看,也应该是2019年2月15日发布),支持2018SP1、NI VISION 2018SP1以及 NXG3.0版本。该版本是在VAS18.5版本上修改得来的,具体更新了什么内容未知,因为连自述文件都是用的VAS18.5版本的。从文件比较来看,好像VAS对各版本的快速VI有修正。建议使用新的VAS18.5.1版本,NI官方也是推荐了该版本,NI官方也只放出了该版本的信息,而将VAS18.5版本的信息删除了。
文件大小: 3298820332 字节 (3.07 GB)
修改日期: 2019-02-19 22:02
MD5: 4ed72a1a5680f8c11dd7adf7cd8c59e2(官方正确)
SHA1: 70848a8271d3dfd447ea1f6d0782e021ec5a219b
SHA256: 8d576f1520a2b4fde87c066d431b7c0499c09ece27e32b3fcceb2d5d53da5103
CRC32: c660e917
百度网盘下载地址:
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看
NI官方下载地址(可能无效或无法下载完成):
请购买附件下载查看
NI Vision Acquisition Software 18.5.1 LabVIEW2018SP1 Win32/64Eng 视觉采集软件VAS1851下载
http://pcmv.cn/thread-22818-1-1.html?fromuid=9
(出处: 机器视觉论坛)
NI Vision Acquisition Software 18.5 Readme
Overview
NI-IMAQ is driver software for the following device types:
analog cameras
parallel digital cameras
Camera Link cameras
NI-IMAQdx is driver software for the following device types:
PCIe-1427
PCIe-1433
PCIe-1437
PXIe-1435
Camera Link cameras in Windows using the supported frame grabbers
ISC-178x smart cameras
GigE Vision-compliant cameras
USB3 Vision-compliant cameras
IIDC/DCAM-compliant IEEE 1394 cameras
DirectShow-compatible cameras
Basler and Axis IP cameras
NI-IMAQ I/O is driver software for controlling reconfigurable input/output (RIO) on image acquisition devices and real-time targets. The following hardware is supported by NI-IMAQ I/O:
NI CVS-1457RT
NI CVS-1458
NI CVS-1458RT
NI CVS-1459
NI CVS-1459RT
NI PCI-8254R
NI PCIe-8255R
NI PCIe-8237R
NI PCIe-1473R
NI PCIe-1473R-LX110
NI PCIe-1477
NI 1483 FlexRIO Adapter Module
Note: New versions of Vision Acquisition Software no longer support the following hardware:
NI 17xx and NI 177x Smart Cameras
NI EVS-1463, 1463RT, 1464, 1464RT Smart Cameras
NI CVS-1454, 1455, and 1456 Compact Vision Systems
Additional Driver Software
The NI PCIe-1473R and NI PCIe-1473R-LX110 require NI FlexRIO software to access the DRAM resources in a FPGA project.
The NI 1483 FlexRIO Adapter Module requires NI FlexRIO software.
System Requirements
Processor | Pentium 4 1 GHz or equivalent | |
Memory | 512 MB RAM | |
Display | 1,024 × 768 resolution video adapter with a 16-bit display | |
Minimum Recommended Free Hard Disk Space | NI Vision Acquisition Software | 3.5 GB |
NI-IMAQ | 1.5 GB | |
NI-IMAQdx | 1.5 GB | |
NI-IMAQ I/O | 2.5 GB | |
Operating System |
|
Product Security and Critical Updates
NI Application Software Support
NI Application Software | Versions Supported by NI Vision Acquisition Software |
NI | 2015, 2016, 2017, 2018 |
NI Real-Time Module | 2015, 2016, 2017, 2018 |
NI FPGA Module | 2015, 2016, 2017, 2018 |
NI NXG | 3.0 |
NI LabWindows™/CVI™ | 2012, 2013, 2015, 2017 |
NI Vision Development Module | 7.1 or later |
NI Vision Builder for Automated Inspection | 2.5 or later |
NI Vision Acquisition Software .NET Support
Vision Standards Support
Machine Vision or Imaging Standard | Version Supported by NI Vision Acquisition Software |
Camera Link® | 2.0 |
GenICam™ | 3.0.1 |
GigE Vision® | 2.0 (select features) |
IIDC | 1.32 |
USB3 Vision® | 1.0.1 |
New Features
Added support for 2018 SP1
Added support for 2018 SP1
Added support for NXG 3.0
For information about VAS support in NXG, visit ni.com/info and enter the Info Code VisionNXGGuide.
Added support for 2018 SP1
Added support for FPGA-based Camera Link acquisition in Windows using the following frame grabbers:
PCIe-1477
Updates and Improvements
Known Issues
Installing or reinstalling certain drivers, including NI-IMAQdx or Vision RIO support, on top of previous installations on a Linux Real-Time target can put the target in an unreachable state unless you force it into safe mode using the reset button or manually reassociate driver dependencies on the target. To avoid this issue, format the target prior to installing or reinstalling software, or only perform reinstallations using a Recommended Software Set. To learn more about this issue and additional recovery options, visit ni.com/info and enter the Info Code nikalEmbeddedReinstall.
Installation Instructions
Insert the NI Vision Acquisition Software installation media.
If you do not have autorun enabled, double-click autorun.exe. If you have autorun enabled, autorun.exe runs automatically.
Follow the onscreen instructions.
Installing from an NI Software Suite or NI Product Bundle
Configuring NI-IMAQ
Install your image acquisition device, and connect the camera. Refer to the device documentation for specific hardware installation instructions.
Run NI MAX.
Double-click the NI MAX icon on the desktop. You can use NI MAX to modify camera properties. Once you have saved these properties, they become the default settings for all NI-IMAQ applications.
Expand Devices and Interfaces and NI-IMAQ Devices to display a list of the image acquisition devices installed on your computer.
Select a camera file, and acquire an image.
Use the Snap button to acquire and display a single image with the image acquisition device.
Use the Grab button to acquire images continuously. A grab allows you to focus the camera.
Click the plus sign next to the image acquisition device to expand the menu tree and list the available channels or ports. Right-click the channel or port to display a list of available cameras.
Select the appropriate camera type from the list. Camera type selection varies according to the image acquisition device installed.
To change the camera settings, modify the parameters at the bottom of the image viewer panel.
You can acquire an image in the following ways:
Configuring a Remote PXI/Compact PCIe Image Acquisition Device
Launch NI MAX.
In the Configuration tree, expand Remote Systems.
Expand the appropriate system.
Expand Devices and Interfaces.
Expand NI-IMAQ Devices.
Expand the device you want to configure.
Configuring NI-IMAQdx
Installing the High Performance GigE Vision Driver
Install the NIC.
Right-click the NIC in the Device Manager, and select Update Driver.
Choose Browse my computer for driver software.
Browse to the driver location. The newest driver version is installed to <National Instruments>NI-IMAQdxStagingNI GigE Vision.
Click Next.
Click Close.
Installing the Universal GigE Vision Driver
Install the NIC and any related drivers. Refer to the NIC device documentation for installation instructions.
Enable jumbo frames (frame packet size is greater than 1,500 bytes) on your NIC.
Right-click the NIC in the Device Manager, and select Properties.
Click the Advanced tab, and Jumbo Frames will appear in the Property list if supported by your NIC.
Select the largest frame size available and click OK.
Disable the Windows Firewall or any additional third party firewalls on the port. Windows Firewall can be disabled on individual ports from the Advanced tab of the Windows Firewall applet.
Configuring NI-IMAQdx for Windows
Connect the camera.
Run NI MAX.
Double-click the NI MAX icon on your desktop. You can use NI MAX to modify camera attributes. After you have saved these attributes, they become the default settings for all NI-IMAQdx or NI Vision applications.
Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.
For IEEE 1394 and USB3 Vision cameras, NI-IMAQdx may not be associated with the camera if a third-party driver is installed. If this is the case, change the associated driver by right-clicking the camera and selecting Driver»NI-IMAQdx.
Select the camera from the list. You then can view or modify the camera attributes on the Camera Attributes tab located below the image viewer.
Configuring NI-IMAQdx for the Real-Time Module
Install NI-IMAQdx software on your Windows development machine.
Ensure that your RT target is connected to the same subnet as the Windows development machine.
Run NI MAX.
Double-click the NI MAX icon on your desktop.
Expand the Remote Systems list in the configuration tree.
Select your RT target in the list.
Configure your network settings. Refer to the Remote Systems Help in NI MAX (Help»Help Topics»Remote Systems) for instructions about configuring network settings.
Install NI-IMAQdx on the Real-Time target, using one of the following options:
Click the Software item below the RT target in the configuration tree.
Click Add/Remove Software on the NI MAX toolbar to launch the Real-Time Software Wizard.
If you are given a choice of Recommended Software Sets, choose custom software installation and click Next to proceed with a custom installation.
Select NI-IMAQdx, as well as any additional software you would like to install on the target machine.
Click Next. Review the list of software you selected to install.
Click Next to begin downloading the software to the target machine. When NI MAX has finished downloading the software, it restarts the remote device.
Click Finish.
Click the Software item below the RT target in the configuration tree.
Click Add/Remove Software on the NI MAX toolbar to launch the Real-Time Software Wizard.
Select Vision Software, NI CompactRIO, NI Industrial Controller, or FlexRIO under the version of the Real-Time Module you are using.
Click Next.
Select any additional add-ons you would like to install to the target machine. For some real-time targets, such as CompactRIO controllers, NI-IMAQdx or supported camera types will appear as an add-on.
Click Next. Review the list of software you selected to install.
Click Next to begin downloading the software to the target machine. When NI MAX has finished downloading the software, it restarts the remote device.
Click Finish.
Recommended Software Set on supported Smart Cameras, Embedded Vision Systems, Compact Vision Systems, CompactRIO controllers, NI Industrial Controllers, and FlexRIO controllers
Custom installation
Connect your camera to your remote system.
Press <F5> to refresh the NI MAX configuration tree. Your camera should be listed in the Remote Systems list.
Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.
Select the camera from the list. You then can view or modify the camera attributes from the Camera Attributes panel located below the image viewer.
Automating the Installation of NI Products
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Documentation and Examples
NI Vision Acquisition Software Documentation for NI MAX
You can access the Measurement & Automation Explorer Help for NI-IMAQ and the Measurement & Automation Explorer Help for NI-IMAQdx from the NI MAX Help menu by selecting Help»Help Topics»NI Vision. These documents are installed to <National Instruments>MAXHelp.
NI Vision Acquisition Software Documentation for
You can access the NI-IMAQ VI Reference Help, NI-IMAQdx VI Reference Help, and NI Vision-RIO VI Reference Help from the Help menu.
NI Example Finder—Illustrates common applications you can create with NI Vision Acquisition Software. In , select Help»Find Examples. Click the Help button in the NI Example Finder to display the NI Example Finder Help. Vision Acquisition Software examples for are installed to <> is the location is installed.
NI Vision Acquisition Software Documentation for LabWindows/CVI
NI-IMAQ Function Reference Help—Contains reference information about NI-IMAQ functions for LabWindows/CVI.
NI-IMAQdx Function Reference Help—Contains reference information about NI-IMAQdx functions for LabWindows/CVI.
Function panel help within LabWindows/CVI—Allows you to right-click within each function to access help for that function, control, function class, and function library. The NIIMAQdx.fp, and <National Instruments>CVIBin.
Example programs are installed to
versionsamples
NI Vision Acquisition Software for Eclipse and other Text-based Development Environments
Getting Started with C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition with the NI Vision Development Module and NI-IMAQdx—Describes how to use the C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition to develop an example C application using the NI Vision Development Module API and/or NI-IMAQdx, and deploy it on a Linux remote target. This tutorial outlines the basic steps required to build and deploy an example application. This document is installed to <National Instruments>VisionHelp.
To view text-based example programs, select Start»All Programs»National Instruments»Vision»Examples, and then select the driver you want to see examples for. You can also navigate to <Users>PublicPublic DocumentsNational Instruments.
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
NXG Considerations
Camera Link cameras used with supported frame grabbers
GigE Vision-compliant cameras
USB3 Vision-compliant cameras
IIDC/DCAM-compliant IEEE 1394 cameras (not available in the measurement panels or SystemDesigner)
DirectShow-compatible cameras
Basler and Axis IP cameras
Installing NI-IMAQdx for NXG
Visit ni.com/info and enter the Info Code NXGDownload to access the NXG download page.
Click Download NXG.
NI Package Manager installs, then automatically opens an installation window.
Select� NXG 3.0�and�NI-IMAQdx 18.5.
�Complete the installer instructions to download NXG and NI-IMAQdx support for NXG.
Legal Information
Notices are located in the <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.