Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html
NI Vision Acquisition Software 17.5 LabVIEW2017SP1 视觉采集软件VAS1750下载
http://pcmv.cn/thread-17565-1-1.html?fromuid=9
(出处: 机器视觉论坛)
NI Vision Acquisition Software 17.5 Readme
Overview
NI-IMAQ is driver software for the following device types:
NI 17xx smart cameras
analog cameras
parallel digital cameras
Camera Link cameras
NI-IMAQdx is driver software for the following device types:
NI 177x smart cameras
ISC-178x smart cameras
GigE Vision-compliant cameras
USB3 Vision-compliant cameras
IIDC/DCAM-compliant IEEE 1394 cameras
DirectShow-compatible cameras
Basler and Axis IP cameras
NI-IMAQ I/O is driver software for controlling reconfigurable input/output (RIO) on image acquisition devices and real-time targets. The following hardware is supported by NI-IMAQ I/O:
NI CVS-1457RT
NI CVS-1458
NI CVS-1458RT
NI CVS-1459
NI CVS-1459RT
NI EVS-1463
NI EVS-1463RT
NI EVS-1464
NI EVS-1464RT
NI PCI-8254R
NI PCIe-8255R
NI PCIe-8237R
NI PCIe-1473R
NI PCIe-1473R-LX110
NI 1483 FlexRIO Adapter Module
Note: New versions of Vision Acquisition Software no longer support the following hardware:
NI 1762 and 1764 Smart Cameras
NI CVS-1454, 1455, and 1456 Compact Vision Systems
Note: The EVS-146x series of controllers are not supported in LabVIEW 2016 or later.
Additional Driver Software
The NI PCIe-1473R and NI PCIe-1473R-LX110 require NI FlexRIO software to access the DRAM resources in a LabVIEW FPGA project.
The NI 1483 FlexRIO Adapter Module requires NI FlexRIO software.
System Requirements
Processor | Pentium 4 1 GHz or equivalent | |
Memory | 512 MB RAM | |
Display | 1,024 × 768 resolution video adapter with a 16-bit display | |
Minimum Recommended Free Hard Disk Space | NI Vision Acquisition Software | 3.5 GB |
NI-IMAQ | 1.5 GB | |
NI-IMAQdx | 1.5 GB | |
NI-IMAQ I/O | 2.5 GB | |
Operating System |
|
Product Security and Critical Updates
NI Application Software Support
NI Application Software | Versions Supported by NI Vision Acquisition Software |
NI LabVIEW | 2014, 2015, 2016, 2017 |
NI LabVIEW Real-Time Module | 2014, 2015, 2016, 2017 |
NI LabVIEW FPGA Module | 2014, 2015, 2016, 2017 |
NI LabVIEW NXG | 2.0 |
NI LabWindows™/CVI™ | 2012, 2013, 2015, 2017 |
NI Vision Development Module | 7.1 or later |
NI Vision Builder for Automated Inspection | 2.5 or later |
NI Vision Acquisition Software .NET Support
Vision Standards Support
Machine Vision or Imaging Standard | Version Supported by NI Vision Acquisition Software |
Camera Link® | 2.0 |
GenICam™ | 3.0.1 |
GigE Vision® | 2.0 (select features) |
IIDC | 1.32 |
USB3 Vision® | 1.0.1 |
New Features
No new features for this release
Added support for LabVIEW NXG 2.0
Installing from an NI Software Suite or NI Product Bundle
Configuring NI-IMAQ
Configuring a Remote PXI/Compact PCIe Image Acquisition Device
Configuring NI-IMAQdx
Installing the High Performance GigE Vision Driver
NI Vision Acquisition Software Documentation for LabVIEWNI Vision Acquisition Software Documentation for LabWindows/CVINI Vision Acquisition Software for Eclipse and other Text-based Development EnvironmentsUsing NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
LabVIEW NXG Considerations
Legal Information
Notices are located in the <National Instruments> directories.
EULAs are located in the <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
GigE Vision-compliant cameras
USB3 Vision-compliant cameras
IIDC/DCAM-compliant IEEE 1394 cameras (not available in the measurement panels or System Designer)
DirectShow-compatible cameras
Basler and Axis IP cameras
Getting Started with C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition with the NI Vision Development Module and NI-IMAQdx—Describes how to use the C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition to develop an example C application using the NI Vision Development Module API and/or NI-IMAQdx, and deploy it on a Linux remote target. This tutorial outlines the basic steps required to build and deploy an example application. This document is installed to <Users>PublicPublic DocumentsNational Instruments.
versionsamples
NI-IMAQ Function Reference Help—Contains reference information about NI-IMAQ functions for LabWindows/CVI.
NI-IMAQdx Function Reference Help—Contains reference information about NI-IMAQdx functions for LabWindows/CVI.
Function panel help within LabWindows/CVI—Allows you to right-click within each function to access help for that function, control, function class, and function library. The NIIMAQdx.fp, and <National Instruments>CVIBin.
Example programs are installed to
You can access the NI-IMAQ VI Reference Help, NI-IMAQdx VI Reference Help, and NI Vision-RIO VI Reference Help from the LabVIEW Help menu.
NI Example Finder—Illustrates common applications you can create with NI Vision Acquisition Software. In LabVIEW, select Help»Find Examples. Click the Help button in the NI Example Finder to display the NI Example Finder Help. Vision Acquisition Software examples for LabVIEW are installed to <LabVIEW> is the location LabVIEW is installed.
Install the NIC.
Right-click the NIC in the Device Manager, and select Update Driver.
Choose Browse my computer for driver software.
Browse to the driver location. The newest driver version is installed to <National Instruments>MAXHelp.
Launch NI MAX.
In the Configuration tree, expand Remote Systems.
Expand the appropriate system.
Expand Devices and Interfaces.
Expand NI-IMAQ Devices.
Expand the device you want to configure.
Click the plus sign next to the image acquisition device to expand the menu tree and list the available channels or ports. Right-click the channel or port to display a list of available cameras.
Select the appropriate camera type from the list. Camera type selection varies according to the image acquisition device installed.
To change the camera settings, modify the parameters at the bottom of the image viewer panel.
You can acquire an image in the following ways:
Use the Snap button to acquire and display a single image with the image acquisition device.
Use the Grab button to acquire images continuously. A grab allows you to focus the camera.
Double-click the NI MAX icon on the desktop. You can use NI MAX to modify camera properties. Once you have saved these properties, they become the default settings for all NI-IMAQ applications.
Expand Devices and Interfaces and NI-IMAQ Devices to display a list of the image acquisition devices installed on your computer.
Install your image acquisition device, and connect the camera. Refer to the device documentation for specific hardware installation instructions.
Run NI MAX.
Select a camera file, and acquire an image.
For information about VAS support in LabVIEW NXG, visit autorun.exe. If you have autorun enabled, autorun.exe runs automatically.
Follow the onscreen instructions.