石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI Vision Acquisition Software 2013.08 LabVIEW2013 Win32/64Eng 视觉采集软件VASAugust2013

文章来源:石鑫华视觉网时间:2022-06-24 16:49:13 点击:278

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Vision Acquisition Software 2013.08 LabVIEW2013 Win32/64Eng 视觉采集软件VASAugust2013
Windows 8 32-bit/8 64-bit/7 64-bit/7 32-bit/Vista/XP 32-bit/Server 2008/Server 2003 R2 32-bit

文件大小: 2062514761 字节 (1.92 GB)
修改日期: 2013-09-04 23:07
MD5: 2a132dd5e47406c3a21a79a10cbd355c（官方正确）
SHA1: 73a396245b24c5af8830af659b075f70eeb00cdc
SHA256: 279e3205b97311c604c2524a80bd67eb0a85ec1a9ac667df3396249df17049ea
CRC32: b80f2dc5

百度云盘下载：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看

NI官方下载地址（可能无效或无法下载完成）：
标准下载：
请购买附件下载查看
下载器下载：
请购买附件下载查看

NI Vision Acquisition Software 2013.08 LabVIEW2013 Win32/64Eng 视觉采集软件VASAugust2013

http://pcmv.cn/thread-1117-1-1.html?fromuid=9

(出处: 机器视觉论坛)



描述：
NI Vision Acquisition Software allows you to acquire, display, and save images and configure your driver software and hardware. This software includes NI-IMAQ, a free driver for acquiring from analog, parallel digital, and Camera Link cameras as well as NI Smart Cameras. The software also features the activation-based NI-IMAQdx driver for acquiring from GigE Vision devices, IIDC-compliant IEEE 1394 cameras, DirectShow-compliant USB devices,USB3Vision cameras and IP cameras. A license for this software is included with all NI vision hardware and all NI vision software licenses, and is also sold separately for applications that do not require image processing or specialized hardware.

新功能：
Support for LabVIEW 2013
NI-IMAQdx 4.2 support for USB3 Vision cameras on Windows and NI Linux Real-Time targets
NI-IMAQ 4.7.3 improved performance of IMAQ Close when releasing large amounts of previously allocated memory
NI-IMAQdx 4.2 support for the NI cRIO-9068, NI myRIO-1900, and NI myRIO-1950
NI-IMAQdx 4.2 support for USB video class (UVC) cameras on NI Linux Real-Time targets

支持USB3相机了，嗯。值得拥有。


NI Vision Acquisition Software Release Notes

August 2013
This file contains important information about National Instruments Vision Acquisition Software, and is organized into the following sections:
New Features
Upgrade Considerations for Legacy NI-IMAQ for IEEE 1394 Cameras
Minimum System Requirements
Updates and Improvements
Software Support
Installation
Automating the Installation of NI Products
Configuring NI-IMAQ
Configuring NI-IMAQdx
Known Issues
Documentation
NI Vision Acquisition Software allows you to acquire, display, and save images; control digital I/O on National Instruments image acquisition devices; and configure your driver software and hardware.

New Features

This release of Vision Acquisition Software includes the following new features:

NI-IMAQ 4.7.3

NI-IMAQ is driver software for NI 17xx smart cameras, as well as analog, parallel digital, and Camera Link image acquisition devices.

  • Support for LabVIEW 2013

  • Improved performance of IMAQ Close when releasing large amounts of previously allocated memory

  • Windows 64-bit systems with more than 3 GB of RAM can load and execute code written in C. However, memory access is still limited to 3 GB.

NI-IMAQdx 4.2

NI-IMAQdx is driver software that supports NI 177x smart cameras, as well as IEEE 1394, GigE Vision, DirectShow-compatible USB, USB3 Vision cameras, and IP cameras.

  • Support for LabVIEW 2013

  • Support for USB3 Vision cameras on Windows and NI Linux® Real-Time targets

  • Support for USB video class (UVC) cameras on NI Linux® Real-Time targets

  • Support for the NI cRIO-9068, NI myRIO-1900, and NI myRIO-1950

NI-IMAQ I/O 2.7

NI-IMAQ I/O provides support for reconfigurable input/output (RIO) using National Instruments EVS-1460 Series Embedded Vision Systems, compact vision systems, and other GigE Vision and IEEE 1394 reconfigurable image acquisition devices.

  • Support for LabVIEW 2013

Upgrade Considerations for Legacy NI-IMAQ for IEEE 1394 Cameras

NI-IMAQdx no longer supports Legacy NI-IMAQ for IEEE 1394 Cameras. This version of NI-IMAQdx uninstalls the Legacy NI-IMAQ for IEEE 1394 Cameras feature of NI-IMAQdx 3.3 or earlier. If you require Legacy NI-IMAQ for IEEE 1394 Cameras, you must download and install it separately. Visit ni.com/infoand enter the info code legacy1394 for information about how to install Legacy NI-IMAQ for IEEE 1394 Cameras. This version of NI-IMAQdx does not affect separate installations of Legacy NI-IMAQ for IEEE 1394 Cameras.

Porting Existing Legacy NI-IMAQ for IEEE 1394 Cameras Applications to NI-IMAQdx

In most cases, there is a one-to-one correlation between an NI-IMAQdx VI or function and Legacy NI-IMAQ for IEEE 1394 Cameras VI or function. For example, the IMAQ 1394 Snap VI has been replaced with the IMAQdx Snap VI and takes similar parameters.
You set and get camera attributes differently for each driver. For example, with Legacy NI-IMAQ for IEEE 1394 Cameras, you passed in an enumerated type that contained the attribute name and a value. With NI-IMAQdx, you pass a string with the attribute name and value.
Another major difference between the two drivers is that NI-IMAQdx now supports the Event Structure in LabVIEW. Rather than using occurrences, as you did with Legacy NI-IMAQ for IEEE 1394 Cameras, you can now register the Frame Done event to fire in LabVIEW for more readable code.

Maintenance and Support Policy

National Instruments recommends that all new applications be developed with NI-IMAQdx. All new features, bug fixes, or other enhancements in the future will be made to the NI-IMAQdx driver and API. NI-IMAQ for IEEE 1394 Cameras is "frozen" to ensure that the behavior of existing applications does not change. NI-IMAQdx no longer includes Legacy NI-IMAQ for IEEE 1394 Cameras. This version of NI-IMAQdx uninstalls Legacy NI-IMAQ for IEEE 1394 Cameras. If you requires Legacy NI-IMAQ for IEEE 1394 Cameras, you must download and install it separately. Visit ni.com/info and enter the info code legacy1394 for information about how to install Legacy NI-IMAQ for IEEE 1394 Cameras. National Instruments Applications Engineers no longer support the Legacy NI-IMAQ for IEEE 1394 Cameras API.

Minimum System Requirements

The development computer must meet the following requirements to run NI Vision Acquisition Software:
Processor
Pentium 4 1 GHz or equivalent
Memory
512 MB RAM
Display
1,024 × 768 resolution video adapter with a 16-bit display
Minimum Recommended
Free Hard Disk Space		Vision Acquisition Software
2 GB
NI-IMAQ
1 GB
NI-IMAQdx
1 GB
NI-IMAQ I/O
1.5 GB
Operating System
Windows 8/7/Vista/XP SP3 (32-bit)/Server 2008 R2/Server 2003 R2 (32-bit)
Browser
Microsoft Internet Explorer 6.0 or later

Updates and Improvements

The following list describes issues in previous versions of the NI Vision Development Module that are fixed in this release. If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the NI Vision Development Module.
IDFixed Issue
380821Running an FPGA VI interactively on an NI PCIe-8255R results in an error.
410459Consecutive runs of the HL Grab or LL Grab CVI example results in a timeout error on systems with an NI PCI-1424/1428.
400032Vision Acquisition Software February 2013 incorrectly installs clsernat.dll to the c: root directoy.
365091Loading an NI IMAQdx VI begins the Vision Acquisition Software 7-day evaluation period without prompting the user.
371092imgPlotDC2 does not display images with bit depths greater than 8 bits in 64-bit applications.
404765NI-IMAQ I/O has an error in a resource XML file which causes compilation failures. This was also fixed in Vision Acquisition Software February 2013.

Software Support

This section describes the operating systems and application development environments (ADEs) supported by NI Vision Acquisition Software.

Operating Systems

  • NI-IMAQ and NI-IMAQdx: LabVIEW Real-Time Module 8.6 or later

  • NI-IMAQ I/O: LabVIEW Real-Time Module 2009 or later

  • Windows 8/7/Vista/XP SP3 (32-bit) SP2/Server 2008 R2/Server 2003 R2 (32-bit). Refer to the following table for more information.

Note  NI Vision Acquisition Software does not support Windows Server non-R2 editions.



DeviceWindows 8/7/Vista/XP SP3/Server 2003 R2 32-bit versionsWindows 8/7/Vista/Server 2008 R2 64-bit versions
NI 1405
Yes
Yes*
NI 1407
Yes
Yes*
NI 1408
No
No
NI 1409
Yes
Yes*
NI 1410
Yes
Yes*
NI 1411
Yes
Yes*
NI 1422
Yes
Yes*
NI 1424
Yes
Yes*
NI 1426
Yes
Yes*
NI 1427
Yes
Yes*†
NI 1428
Yes
Yes*
NI 1429
Yes
Yes*†
NI 1430
Yes
Yes*†
NI 1433
Yes
Yes*†
NI 1435
Yes
Yes*†
NI 1473R
Yes
Yes*†
NI 1483
Yes
Yes*
NI 8231
Yes
Yes
NI 8234
Yes
Yes
NI 8235
Yes
Yes
NI 8236
Yes
Yes
NI 8237R
Yes
Yes
NI 8252
Yes
Yes
NI 8254R
Yes
Yes
NI 8255R
Yes
Yes
*  Applications developed using LabVIEW 8.2.1 or later will run on systems with more than 3 GB of physical memory. Applications developed using other development environments, such as Microsoft Visual C, Visual Basic, and .Net, are limited to systems with 3 GB or less of physical memory. All 32-bit applications, including those developed using LabVIEW, may not allocate more than 2 GB of memory total.
†  A firmware update is available for this device to allow non-LabVIEW applications to run on systems with more than 3 GB of physical memory. To update the device firmware, launch MAX and select Tools»NI Vision»Update NI-IMAQ Device Firmware.

Remote Target Support

NI Vision Acquisition Software September 2011 was the last version of NI Vision Acquisition Software to provide support for the NI 1762 Smart Camera and the NI 1764 Smart Camera. New software features of NI Vision Acquisition Software will not work on these devices. Backward compatibility for existing applications is maintained.

Development Environments

  • NI-IMAQ and NI-IMAQdx: LabVIEW 8.6 or later

  • NI-IMAQ I/O: LabVIEW 2009 or later

  • LabWindows/CVI 8.1 or later

  • Microsoft Visual C/C++ 6.0 or later

  • Microsoft Visual Basic 6.0 or later

  • Microsoft Visual Studio .NET 2005 and 2008 (except NI-IMAQ I/O)

Additional Software

You can also use NI-IMAQ, and NI-IMAQdx with the following National Instruments software packages to prototype, benchmark, and deploy your applications.

  • NI Vision Development Module 7.1 or later

  • NI Vision Builder for Automated Inspection (Vision Builder AI) 2.5 or later

Installation Instructions

Complete the following steps to install NI Vision Acquisition Software:
Note: You must have administrator access to install the NI Vision Acquisition Software.

  • Insert the NI Vision Acquisition Software installation media.

  • If you do not have autorun enabled, double-click Program FilesNational InstrumentsNI-IMAQdxStagingNI USB3 Vision.

  • Click OK. In the next window, select your device, then click Next.

  • A warning will appear. Click Continue Anyway.

  • Click Finish.

Known IssuesNI-IMAQ

  • In LabVIEW 2012 and earlier, error codes returned during a property node read or write are not being reported correctly. The status flag is set correctly, to notify you that an error occurred, but the code is set to an invalid value.

NI-IMAQdx

  • Volume License Manager will attempt to check out available Vision Development Module licenses before trying Vision Acquisition Software licenses.

  • Attempts to extend the evaluation period for Vision Acquisition Software licenses from within LabVIEW or the LabVIEW Run-Time Engine are unsuccessful in connecting to the internet.

Documentation

The NI Vision Acquisition Software documentation is installed onto your hard drive with NI Vision Acquisition Software. The documentation ships as Adobe Acrobat portable document format (PDF) files and HTML Help files. To view the NI Vision Acquisition Software documentation, select Start»All Programs»National Instruments»Vision»Documentation.
Note: You must have Adobe Acrobat Reader installed to view the PDFs. Refer to the Adobe Systems Incorporated Web site at www.adobe.com to download the latest version of Adobe Reader.

NI LabVIEW Documentation

You can access the NI-IMAQ VI Reference Help, NI-IMAQdx VI Reference Help, and NI Vision-RIO VI Reference Help from the LabVIEW Help menu. In LabVIEW, select Help»NI Vision for LabVIEW Help.

.NET Documentation

The NI Vision Acquisition Software .NET documentation merges into the NI Measurement Studio Help. The NI Measurement Studio Help integrates into the Visual Studio Combined Help Collection under the Measurement Studio node in the Table of Contents. In order for links from Measurement Studio help topics to .NET Framework help topics to work, you must install the product documentation for Visual Studio, which installs the MSDN Library. This requires a secondary installation during the Visual Studio installation process.
The NI Measurement Studio Help is in the Microsoft Help 2.0 format and requires a Microsoft Help 2.0 viewer to be displayed. A Microsoft Help 2.0 viewer is installed with both Microsoft Visual Studio and the Microsoft .NET Framework SDK. The SDK is freely available from MSDN at http://www.microsoft.com/downloads. If you do not have either of these products, you will need a standalone Microsoft Help 2.0 viewer to display the documentation. Some Help 2.0 viewers are available for download, such as Helpware's H2Viewer.

  • NI Measurement Studio Help—Contains reference information about NI Vision for .NET objects. Describes how to create machine vision and image processing applications in Visual Basic .NET and C# using the NI Vision Development Module. You can launch the NI Measurement Studio Help in the following ways:

    If you have Measurement Studio installed:


    Trademarks

    National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
    The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a world-wide basis.
    Other product and company names mentioned herein are trademarks or trade names of their respective companies.

    Patents

    For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

    • From the Windows Start menu, select Start»All Programs»National Instruments»<Measurement Studio>»Measurement Studio Documentation, where <National Instruments>_Legal Information and <National Instruments>SharedMDFLegallicense directory.

    • Review <font face="" "="" style="margin: 0px; padding: 0px; overflow-wrap: break-word;"><National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.


首页
84162741QQ
联系