Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Vision Acquisition Software 2010.08 LabVIEW2010 Win32/64Eng 视觉采集软件VASAugust2010
视觉采集软件是NI的图像处理部分的相机驱动程序。可以驱动支持标准视觉协议的国内外品牌工业相机。VAS2010August是2010年8月发布的版本，适用于2010年6月发布的LabVIEW2010版本。

NI官方已经没有相应的版本下载。仅提供视觉论坛珍藏版
百度云盘下载：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看

NI Vision Acquisition Software 2010.08 LabVIEW2010 Win32/64Eng 视觉采集软件VASAugust2010

http://pcmv.cn/thread-22780-1-1.html?fromuid=9

(出处: 机器视觉论坛)

NI Vision Acquisition Software Release Notes

• NI-IMAQ—<National Instruments>NI-IMAQdxDocs eadme.html

• NI-IMAQ I/O—autorun.exe. If you have autorun enabled, autorun.exe runs automatically.

• Follow the onscreen instructions.
  

Installing from an NI Software Suite or NI Product Bundle

Configuring NI-IMAQ

• Install your image acquisition device, and connect the camera. Refer to the device documentation for specific hardware installation instructions.

• Run MAX.
  

• Double-click the MAX icon on the desktop. You can use MAX to modify camera properties. Once you have saved these properties, they become the default settings for all NI-IMAQ applications.

• Expand Devices and Interfaces and NI-IMAQ Devices to display a list of the image acquisition devices installed on your computer.
  

• Select a camera file, and acquire an image.
  
  

• Use the Snap button to acquire and display a single image with the image acquisition device.

• Use the Grab button to acquire images continuously. A grab allows you to focus the camera.
  

• Click the plus sign next to the image acquisition device to expand the menu tree and list the available channels or ports. Right-click the channel or port to display a list of available cameras.

• Select the appropriate camera type from the list. Camera type selection varies according to the image acquisition device installed.

• To change the camera settings, modify the parameters at the bottom of the image viewer panel.

• You can acquire an image in the following ways:
  
  

Configuring a Remote PXI/Compact PCIe Image Acquisition Device

• Launch MAX.

• In the Configuration tree, expand Remote Systems.

• Expand the appropriate system.

• Expand Devices and Interfaces.

• Expand NI-IMAQ Devices.

• Expand the device you want to configure.
  

Configuring NI-IMAQdx

Installing IEEE 1394 Hardware

Installing the High Performance GigE Vision Driver

• Install your NIC.
  

• If Windows does not prompt you to choose a driver, proceed to step 2.

• If Windows prompts you to choose a driver, proceed to step 3.
  

• Right-click the NIC in the Device Manager, and select Update Driver.

• Choose not to connect to the Windows Update Web site, and click Next.

• Choose to Install from a list or a specific location, and click Next.

• Choose Don't Search. I will choose the driver to install.

• Click Next.

• Select National Instruments GigE Vision driver from the list, and click Next.

• Click Finish.

  Note: Windows may return a warning stating that the driver is unsigned. It is safe to ignore the warning.

  
  

Installing the Universal GigE Vision Driver

• Install the NIC and any related drivers. Refer to the NIC device documentation for installation instructions.

• Enable jumbo frames (frame packet size is greater than 1,500 bytes) on your NIC.
  

  Note: The procedure for enabling jumbo frames on your NIC may vary by manufacturer. Refer to the NIC device documentation for more information about enabling jumbo frames.

• Right-click the NIC in the Device Manager, and select Properties.

• Click the Advanced tab, and Jumbo Frames will appear in the Property list if supported by your NIC.

• Select the largest frame size available and click OK.
  

• Disable the Windows Firewall or any additional third party firewalls on the port. Windows Firewall can be disabled on individual ports from the Advanced tab of the Windows Firewall applet.
  

Configuring Multiple Ports

• Open the Network Connections window in Windows, and select all of the ports that cameras will be connected to by holding <Ctrl> while clicking each port.

• Right-click one of the selected ports, and choose Bridge Connections.

  Note: If you are not using the High Performance Driver, you will be unable to use jumbo frames on bridged devices.

  
  

Configuring NI-IMAQdx for Windows

• Connect the camera.

• Run MAX.
  
  

• Double-click the MAX icon on your desktop. You can use MAX to modify camera attributes. After you have saved these attributes, they become the default settings for all NI-IMAQdx or NI Vision applications.

• Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.

• For IEEE 1394 cameras, NI-IMAQdx may not be associated with the camera. If this is the case, change the associated driver by right-clicking the camera and selecting Driver»NI-IMAQdx.

• Select the camera from the list. You then can view or modify the camera attributes on the Camera Attributes tab located below the image viewer.
  

Configuring NI-IMAQdx for the LabVIEW Real-Time Module

• Install NI-IMAQdx software on your Windows development machine.

• Ensure that your RT target is connected to the same subnet as the Windows development machine.

• Run MAX.
  

• Double-click the MAX icon on your desktop.

• Expand the Remote Systems list in the configuration tree.

• Select your RT target in the list.

• Configure your network settings. Refer to the Remote Systems Help in MAX (Help»Help Topics»Remote Systems) for instructions about configuring network settings.
  

• Install NI-IMAQdx on the RT target.
  

• Click the Software item below the RT target in the configuration tree.

• Click Install Software on the MAX toolbar to launch the LabVIEW Real-Time Install Software Wizard.

• Select NI-IMAQdx RT, as well as any additional software you would like to install on the target machine.

• Click Next. Review the list of software you selected to install.

• Click Next to begin downloading the software to the target machine. When MAX has finished downloading the software, it restarts the remote device.

• Click Finish.
  

• Connect your camera to your remote system.

• Press <F5> to refresh the MAX configuration tree. Your camera should be listed in the Remote Systems list.

  Tip: Press <F5> to refresh the configuration tree whenever you connect a new device to an RT target.

• Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.

• Select the camera from the list. You then can view or modify the camera attributes from the Camera Attributes panel located below the image viewer.
  

Documentation

NI LabVIEW Documentation

.NET Documentation

• NI Measurement Studio Help—Contains reference information about NI Vision for .NET objects. Describes how to create machine vision and image processing applications in Visual Basic .NET and C# using the NI Vision Development Module. You can launch the NI Measurement Studio Help in the following ways:

  If you have Measurement Studio installed:

  
  

  If you do not have Measurement Studio installed:

  
  

• From Visual Studio, select Help»Contents to view the Visual Studio table of contents. The NI Measurement Studio Help is listed in the table of contents.
  

• From the Windows Start menu, select Start»All Programs»National Instruments»<Measurement Studio>»Measurement Studio Documentation, where <font face="" "="" style="margin: 0px; padding: 0px; overflow-wrap: break-word;"><Measurement Studio> is the location to which Measurement Studio is installed. The help launches in a stand-alone help viewer.

• From Visual Studio, select Measurement Studio»NI Measurement Studio Help.
  

• 上篇：NI Vision Acquisition Software 2010.03 for LabVIEW 2009SP1 Win32/64Eng 视觉采集软件VASMarch2010
• 下篇：NI Vision Acquisition Software 2011.03 LabVIEW2010SP1 Win32/64Eng 视觉采集软件VASMarch2011
• 标签：NI Vision Acquisition Software视觉采集软件VASLabVIEW相机驱动软件IMAQdx相机驱动LabVIEW视觉驱动程序NI视觉采集软件