Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
LabVIEW 2015 roboRIO software Suite 1.0 Win32Eng 基于RIO的机器人软件套件1.0
LabVIEW roboRIO software Suite软件套件
基于RIO的机器人软件套件
所需软件
LabVIEW Development System
LabVIEW Real-Time Module
LabVIEW roboRIO Toolkit
可选软件
LabVIEW Control Design and Simulation Module
Control Design Assistant
System Identification Assistant
LabVIEW FPGA Module
LabVIEW MathScript RT Module
LabVIEW Robotics Module for LabRIO
Compilation Tools for Vivado
VI Package Manager
Vision Acquisition Software
Vision Development Module
发布日期：
2015/8/3
支持操作系统：
Windows 7
Windows Server 2012 R2 64-bit
Windows 8.1
Windows Server 2008 R2 64-bit
Windows Server 2003 R2 32-bit
Windows XP (SP3) 32-bit
Windows Vista
Windows 8
语言：
英文
应用程序位数：
32位
版本：
2015完整版
校验和：
文件大小: 2882963456 字节 (2.68 GB)
修改日期: 2015-08-03 14:09
MD5: b9fc957021b8845265717e0f11ac007b
SHA1: 272ff15d851460c0fe7b4a562349234284a858a7
SHA256: fc28121cec4cbd408bc8f99679e5c1b3e633e8ebc3196053c50f8d75c0cd8759
CRC32: a7aef1a3
百度网盘和NI官方下载地址：
LabVIEW roboRIO software Suite 1.0 Win32Eng 基于RIO的机器人软件套件1.0
http://pcmv.cn/thread-28278-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
LabVIEW 2015 roboRIO Software Bundle Readme
June 2015
This file contains important information about the LabVIEW roboRIO Software Bundle, including system requirements, installation instructions, and links to detailed information about included products.
Overview
System Requirements
Installation Instructions
Product Security and Critical Updates
Automating the Installation of NI Products
How to Use NI Software with Microsoft Windows 8.x
NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003
Legal Information
Overview
With the LabVIEW roboRIO Software Bundle, one installation gives you access to the LabVIEW roboRIO Toolkit and other NI software for developing roboRIO applications. The LabVIEW roboRIO Software Bundle contains the following products:
Required Software
Optional Software
VI Package Manager
LabVIEW FPGA Module
Compilation Tools for Vivado
Vision Development Module
Vision Acquisition Software
LabVIEW Control Design and Simulation Module
LabVIEW MathScript RT Module
LabVIEW Robotics Module for myRIO and roboRIO
Refer to the documentation of each product for specific system requirements and supported operating systems.
System Requirements
The LabVIEW roboRIO Software Bundle supports the following operating systems:
Windows 8.0/8.1 (32-bit and 64-bit)
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 3 Professional
Windows Server 2012 R2 (64-bit)
Windows Server 2008 R2 (64-bit)
Windows Server 2003 R2 (32-bit)
Installation Instructions
Complete the following steps to install LabVIEW, Real-Time Module, roboRIO Toolkit, and other NI software on a development computer:
Log in to the development computer as an administrator or as a user with administrative privileges.
Insert the LabVIEW roboRIO Software Bundle DVD 1.
Follow the instructions on the screen to install and activate the software.
(Optional) Insert the LabVIEW roboRIO Software Bundle DVD 2 if you want to install optional software for FPGA programming.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
How to Use NI Software with Microsoft Windows 8.x
When you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.
Using NI Launcher
NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
Note NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch NI MAX either from the Apps view or from within NI Launcher.
Pinning Frequently Used Applications
For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
Current Application | Icon Location | Pin to Action |
| Windows 8.x Desktop | Desktop Taskbar | Right-click application and select Pin to Taskbar |
| Windows 8.x Desktop | Start screen | Right-click application and select Pin to Start |
| Windows 8.x Start screen | Desktop Taskbar | Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen |
Finding All Programs
If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All apps (Windows 8.0) or click the down arrow on the bottom left of the screen (Windows 8.1).
For more information about NI support for Windows 8.x, visit ni.com/windows8.
NI LabVIEW roboRIO Software Bundle Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
National Instruments LabVIEW roboRIO Software Bundle will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of the LabVIEW roboRIO Software Bundle that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
Product | Info Code |
| LabVIEW | lifecycle |
| LabWindows™/CVI™ | cvi_lifecycle |
| Measurement Studio | mstudiolifecycle |
| TestStand | tslcp |
| DIAdem | ddlcp |
| SignalExpress | selcp |
| VeriStand | nivslifecycle |
Legal Information
Copyright
© 2015 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
375390A-01
LabVIEW 2015 roboRIO Toolkit Readme
June 2015
This file contains important information about the LabVIEW roboRIO Toolkit, including system requirements, installation instructions, and known issues.
Overview
System Requirements
Installation Instructions
Installing the USBLAN Driver in Microsoft Windows XP and Windows Server 2003
Product Security and Critical Updates
Known Issues
Using the Universal Asynchronous Receiver/Transmitter (UART) and the ANSI/EIA-232 Standard (RS-232) Channels
Accessing the LabVIEW for roboRIO Environment
Accessing the Help
Finding Examples
Automating the Installation of NI Products
How to Use NI Software with Microsoft Windows 8.x
NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003
Legal Information
Overview
The LabVIEW roboRIO Toolkit provides you with tools for creating and deploying applications on the roboRIO.
System Requirements
The roboRIO Toolkit has the following requirements:
(Optional for C Programming) LabVIEW 2015 Student, Full, or Professional Development System (32-bit)
(Optional for C Programming) LabVIEW 2015 Real-Time Module
At least 2 GB of disk space in addition to the LabVIEW-recommended minimum
1 GB RAM
One of the following operating systems for application development:
Windows 8.0/8.1 (32-bit and 64-bit)
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 3 Professional
Windows Server 2012 R2 (64-bit)
Windows Server 2008 R2 (64-bit)
Windows Server 2003 R2 (32-bit)
Note
The roboRIO Toolkit is compatible with only 32-bit LabVIEW. Install 32-bit LabVIEW even if you use a 64-bit operating system.
You might need more memory than the LabVIEW-recommended minimum depending on the size of the application you design in LabVIEW on the host computer.
Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). Refer to the National Instruments website for information about how this might affect your use of Windows Server 2003 R2 and what actions you might have to take.
The roboRIO Toolkit does not support the Windows Server non-R2 editions.
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW 2015.
Installation Instructions
To install the roboRIO Toolkit using the LabVIEW roboRIO Software Bundle media, complete the following steps:
Log in to the development computer as an administrator or as a user with administrative privileges.
Insert the LabVIEW roboRIO Software Bundle DVD 1.
Select Install NI LabVIEW 2015 roboRIO Toolkit.
(Optional for C Programming) Click the drop-down arrow next to LabVIEW Support and select Install this feature to a local drive.
Click Next and follow the instructions on the screen to install the roboRIO Toolkit.
To install the roboRIO Toolkit using the installer from ni.com/downloads, double-click the setup.exe file in the root directory of the roboRIO Toolkit installer and follow the instructions on the screen to install this product.
Installing the USBLAN Driver in Microsoft Windows XP and Windows Server 2003
You must manually install the USBLAN driver before using the roboRIO with Microsoft Windows XP and Windows Server 2003. Complete the following steps to install the USBLAN driver:
| Note Before completing the following steps, make sure that you have downloaded and installed the KB 931125 package from Microsoft. For more information, refer to the Workarounds and Recommendations section of KB 65O8AH55, Why Are National Instruments Installers Failing on Windows XP and Server 2003 Machines?. |
Connect the roboRIO to your computer after you install the roboRIO Toolkit.
In the Found New Hardware Wizard, select No, not this time and click Next.
Select Install from a list or specific location and click Next.
Select Include this location in the search and navigate to the National InstrumentsCompactRIOStagingUSBLANXP directory.
Click Next to install the USBLAN driver. Click Continue Anyway when you see the Windows Logo testing warning.
Click Finish.
The USBLAN driver appears under Network adapters in the Windows Device Manager.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
Known Issues
You can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in the LabVIEW roboRIO Toolkit.
Using the Universal Asynchronous Receiver/Transmitter (UART) and the ANSI/EIA-232 Standard (RS-232) Channels
Visit ni.com/info and enter the Info Code exkvqg for information about using the UART and the RS-232 channels on the roboRIO.
Accessing the LabVIEW for roboRIO Environment
The roboRIO Toolkit provides the LabVIEW for roboRIO environment to allow you to easily access roboRIO-specific features and focus on developing roboRIO applications.
You can use the Choose Environment Settings dialog box to change your LabVIEW environment. To display this dialog box, select Tools»Choose Environment from LabVIEW.
Accessing the Help
Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about the roboRIO Toolkit.
Finding Examples
Select Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for the roboRIO Toolkit are located in the labviewexamples
oboRIO directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
How to Use NI Software with Microsoft Windows 8.x
When you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.
Using NI Launcher
NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
Note NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch NI MAX either from the Apps view or from within NI Launcher.
Pinning Frequently Used Applications
For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
| Current Application | Icon Location | Pin to Action |
| Windows 8.x Desktop | Desktop Taskbar | Right-click application and select Pin to Taskbar |
| Windows 8.x Desktop | Start screen | Right-click application and select Pin to Start |
| Windows 8.x Start screen | Desktop Taskbar | Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen |
Finding All Programs
If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All apps (Windows 8.0) or click the down arrow on the bottom left of the screen (Windows 8.1).
For more information about NI support for Windows 8.x, visit ni.com/windows8.
NI LabVIEW roboRIO Toolkit Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
National Instruments LabVIEW roboRIO Toolkit will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of the LabVIEW roboRIO Toolkit that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
| Product | Info Code |
| LabVIEW | lifecycle |
| LabWindows™/CVI™ | cvi_lifecycle |
| Measurement Studio | mstudiolifecycle |
| TestStand | tslcp |
| DIAdem | ddlcp |
| SignalExpress | selcp |
| VeriStand | nivslifecycle |
Legal Information
Copyright
© 2015 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
375389A-01
