石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI Vision Development Module 2015 Win32/64Eng 视觉开发模块VDM2015 适用LabVIEW2015

文章来源:石鑫华视觉网时间:2022-06-23 12:22:45 点击:287

Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Vision Development Module 2015 Win32/64Eng 视觉开发模块VDM2015 适用LabVIEW2015

NI视觉开发包2015版适用于LabVIEW2015,包含32位、64位版等,最早支持LabVIEW2012版,2011版的LabVIEW不被支持。
百度网盘下载:
标准下载:
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看
下载器下载:
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看

NI官方下载地址:
标准下载:
请购买附件下载查看
下载器下载:
请购买附件下载查看

NI Vision Development Module 2015 Win32/64Eng 视觉开发模块VDM2015 适用LabVIEW2015

http://pcmv.cn/thread-8486-1-1.html?fromuid=9

(出处: 机器视觉论坛)


NI Vision Development Module 2015 Readme

This file contains important information about National Instruments Vision Development Module, including installation instructions, new features, fixed issues, and known issues.


The NI Vision Development Module provides hundreds of image processing and machine vision functions. Along with programming libraries, the NI Vision Development Module also includes NI Vision Assistant. Installing this software may remove previous versions of the NI Vision Development Module that are currently installed.


Refer to the NI Vision website at ni.com/vision for the latest information about the NI Vision Development Module.


System Requirements

The following table lists the NI application software versions, including service packs, supported by the NI Vision Development Module. The installer specifically allows side-by-side installations of Vision Development Module for each of the supported versions of LabVIEW, enabling you to use the NI Vision Development Module with multiple versions of LabVIEW. National Instruments recommends that you install LabVIEW, LabVIEW Real-Time, or any other supported development environment, before installing the NI Vision Development Module.


NI Application Software
Versions Supported by NI Vision Development Module
NI LabVIEW
2012, 2013, 2014, 2015
NI LabVIEW Real-Time Module
2012, 2013, 2014, 2015
NI LabVIEW FPGA Module
2014 and 2015
NI LabWindows™/CVI™
2010, 2012, 2013, 2015

NI Vision Development Module .NET Support

New versions of NI Vision Development Module will not provide new .NET feature support or development. It is recommended that you begin new development in other supported development environments.


New Features

NI Vision Assistant includes the following new features:


  • Flat Field Correction step to correct an image for intensity variations due to non-uniform lighting

  • Flat Field Creation Wizard to create, analyze, and store flat field images

  • Feature Detection step for FAST feature detection, and Harris and Shi-Tomasi Corner point detection

  • Support for 16-bit color palettes and a new palette editor to create, visualize, and store color palettes for 8-bit and 16-bit images

  • Support for particle analysis report and Bayer VNG decoding on FPGA targets

  • New FPGA Performance Meter, which provides detailed information about algorithm performance on FPGAs

Updates and Improvements

The following list describes previously undocumented issues that were fixed in NI Vision Development Module 2014 SP1.


ID
Fixed Issue
487474The IMAQ Find Straight Edges 3 VI parameter Average SNR (dB) is not returned correctly when requesting more than one edge.
504682IMAQ Image Cluster to Image Datatype VI crashes LabVIEW 2014 for some input values.

Installation InstructionsInstalling from the LabVIEW Platform DVDs

To request additional LabVIEW Platform DVDs, refer to the National Instruments Web site.


Installing from the NI Vision Development Module Installation Media

autorun.exe. If you have autorun enabled, autorun.exe runs automatically.
  • Follow the onscreen instructions.

  • (Optional) Activate NI Vision Development Module when prompted by the installer, or activate at a later time using the NI License Manager.

Installing from an NI Software Suite or NI Product Bundle
When you run an NI Vision application for the first time, it prompts you to activate a license for the product. If you do not activate a valid license, the NI Vision application will run in Evaluation Mode and continue to prompt you to activate a license on each subsequent launch.

Tip: Enter your email address to receive a copy of your activation code for your records.

Deploying Vision Applications
The NI Vision Development Module installer contains the runtime installer for NI Vision. The runtime installer is installed at <Vision>Run-Time Engine, where <Vision> is the location to which the NI Vision Development Module is installed. Visit the ni.com to download software upgrades for NI Vision and the NI Vision Runtime installers.

Purchasing NI Vision Deployment Licenses
Note: Additional NI Vision Runtime licenses do not include installation media. To install additional licenses, use the original NI Vision Development Module installation media and the serial number provided by National Instruments.

Using the NI Vision Runtime
Refer to the LabVIEW Help for more information about the LabVIEW Application Builder. Refer to the NI LabWindows/CVI Help for more information about building and distributing LabWindows/CVI applications.

To call the NI Vision Runtime installer silently (non-interactively), you must add /q /AcceptLicenses yes as command line arguments to the runtime installer. For example, enter <Vision>Run-Time Engine ision<version>rte.exe /q /AcceptLicenses yes, where <Vision> is the location to which NI Vision is installed, and <version> is the version number of the NI Vision Runtime installed. Refer to the Automating the Installation of NI Products section for more information on how to change the level of interactivity of the installer or whether it automatically initiates a system restart.

Distributing LabVIEW Applications
Refer to the LabVIEW Help for more information about viewing the hierarchy of VIs and for more information about using the LabVIEW Runtime.

Distributing LabWindows/CVI Applications
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

For more information, refer to the following KnowledgeBase articles:

  • For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.

  • For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.

  • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.

Known Issues
National Instruments is aware of the following issues you may encounter while using NI Vision Development Module.

  • When an FPGA target is active in a LabVIEW project, the Vision Assistant executable cannot generate code for a non-FPGA LabVIEW target into that same instance of LabVIEW.

  • When zoom factors above 30 are used, the Image Display Control on NI Linux Real-Time targets leaves black-colored border space.

  • The snapshot property node for the Image Display Control on NI Linux Real-Time targets returns an error even though the control is functioning properly. This issue is present only when the target is connected to the host.

  • The Image Display Control on NI Linux Real-Time targets may not work properly when an image is set using a property node value and the target is connected to the host. The property node value works properly when the target is disconnected from the host.

  • Vision FPGA VIs may be broken when opened on one target after being used on another target. You can fix the broken VI by forcing LabVIEW to recompile it by pressing <Ctrl> + <Shift> + Run Button.

  • Vision FPGA Filter VIs with a mask using a 9x9 kernel support image widths up to 2,000 pixels.

  • The IMAQ FPGA GrayMorphology Dilation 5x5 U8x1 VI left border will give incorrect values on Kintex-based NI FPGA targets.

  • The AVI2 VIs do not support writing extra data to AVIs.

  • Japanese and Simplified Chinese for text overlays are not supported on NI Linux Real-Time targets.

  • The Calibration Axis is not set properly in the Calibration Training Interface, resulting in wrong real-world coordinates, when the Calibration Type is set to Point Coordinate Calibration and the Implicit Calibration Axis option is deselected.

  • The IMAQ Read QR Code VI may hang when the QR Code Cell Size has a minimum size of 2 or less. Setting the minimum size to 3 or higher will prevent this issue.

  • The IMAQ Read Data Matrix Barcode 3 VI may hang on some I16 images.

  • Zooming out on a large 32-bit image in the Image Display Control in LabVIEW will cause the image to black out. Only the displayed image is affected. The image itself is not modified.

  • To store error statistics on corrected images, you must run the IMAQ Get Calibration Info2 VI before correcting the calibration template image. The Return Error Information input must be set to TRUE.

  • Vision Assistant cannot generate C code if a double-byte character exists in the path to Vision Assistant or in the destination path for the generated code.

  • Some Vision Development Module .NET examples only work if Measurement Studio 8.6 or later is installed.

  • The Visual Basic .NET Label example does not compile.

  • The installed documentation for NI Vision functions in LabWindows/CVI is incomplete. Refer to the Documentation and Examples section for information about downloading the latest version.

  • There is no 64-bit Vision API for C or .NET.

  • Installing the Vision Development Module on a Windows Vista 64-bit computer where Visual Studio 2005 has been recently installed causes compatibility warnings.

  • On some systems, the Vision Development Module cannot open two of the installed AVI files, SideCrash2.avi, when running as a 64-bit application.

  • NI Vision installs a copy of tbb.dll.

  • The IMAQ Compare VI average operation saturates unsigned 16-bit image values to 32768 instead of 65536.

  • The IMAQ Read File VI recognizes and reads a U16 TIFF image as an I16 TIFF image if the image was not originally created by NI Vision.

  • The IMAQ Overlay Multiple Lines 2 VI returns an error when Fill is the selected Drawing Mode.

  • The IMAQ Edge Tool 3 VI changes the position of edges found when image was calibrated with point coordinates calibration.

Documentation and Examples
Refer to the National Instruments Product Manuals Library at ni.com/manuals for the most recent versions of product documentation.

<LabVIEW>examplesVision and <LabVIEW> is the location LabVIEW is installed.
NI Vision for LabWindows/CVI
  • NI Vision C Support Help—Contains reference information about NI Vision C functions.

  • NI Vision for LabWindows/CVI User Manual—Describes how to create machine vision and image processing applications in LabWindows/CVI using the NI Vision Development Module.

  • Function panel help within LabWindows/CVI—Allows you to right-click within each Vision function to access help for that function, control, function class, and function library. Function panels are installed at <Users>PublicPublic DocumentsNational InstrumentsCVIsamplesVision.

NI Vision for Eclipse and other Text-based Development Environments
  • NI Vision C Support Help—Contains reference information about NI Vision C functions.

  • Getting Started with C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition with the NI Vision Development Module and NI-IMAQdx—Describes how to use the C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition to develop an example C application using the NI Vision Development Module API and/or NI-IMAQdx, and deploy it on a Linux remote target. This tutorial outlines the basic steps required to build and deploy an example application.

  • To view text-based example programs, select Start»All Programs»National Instruments»Vision»Examples»Vision Examples, or navigate to <Users>PublicPublic DocumentsNational InstrumentsVision AssistantDocumentation.

  • To access Vision Assistant examples from the Start menu, select Start»All Programs»National Instruments»Vision»Examples»Vision Assistant Examples, or navigate to When you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.


Using NI Launcher
For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:

Current ApplicationIcon LocationPin to Action
Windows 8.x DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
Windows 8.x DesktopStart screenRight-click application and select Pin to Start
Windows 8.x Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen
Finding All Programs
For more information about NI support for Windows 8.x, visit ni.com/windows8.

NI Vision Development Module Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
Copyright

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

End-User License Agreements and Third-Party Legal Notices

<National Instruments>_Legal Information and <National Instruments>SharedMDFLegallicense directory.
  • Review U.S. Government Restricted Rights


IVI Foundation Copyright Notice

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

<font face="" "="" style="margin: 0px; padding: 0px; overflow-wrap: break-word;">375127B-01


首页
84162741QQ
联系