下载中心

NI Vision Builder for Automated Inspection 2018SP1 Win32/64Eng 自动检测视觉生成器VBAI19.0 LabVIEW2019版适用

文章来源:石鑫华视觉网时间:2022-06-22 12:10:08 点击:539

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI Vision Builder for Automated Inspection 2018SP1 Win32/64Eng 自动检测视觉生成器VBAI19.0 LabVIEW2019版适用

NI Vision Builder for Automated Inspection 2018 SP1 VBAI2018SP1视觉生成器，标准图像处理软件，32位与64位英文版本，Windows系统。与LabVIEW2019同时期发布，支持LabVIEW2019，虽然名称仍然叫VBAI2018SP1（版本号是19.0.0）。可选择离线安装版本下载。

2019年5月发布

支持操作系统：
Windows 7 (SP1) 32-bit
Windows 7 (SP1) 64-bit
Windows 8.1 32-bit
Windows 8.1 64-bit
Windows 10 32-bit
Windows 10 64-bit
Windows Embedded Standard 7 (SP1)
Windows Server 2008 R2 (SP1) 64-bit
Windows Server 2012 R2 64-bit
即要求最低WIN7SP1，对于WIN7、WIN VISTA、WIN XP已经不再支持。

NI在线安装文件地址（NI官方推荐方式）：3.6M，如果无法下载完成安装，请使用离线安装方式，NI官方的下载可能比较难完成，考虑使用百度网盘下载（可用PanDownload软件解除百度网盘限速问题）
NI官方网站下载地址：
请购买附件下载查看
百度云盘下载在线工具PM地址：
链接:请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看

NI VISION Builder for Automated Inspection 2018 SP1 VBAI19.0.0视觉生成器离线ISO下载地址：2.31GB
NI官方地址：
请购买附件下载查看
百度网盘地址：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请优先使用NI在线安装或NI官方离线地址下载，如无法下载，请购买百度网盘提取码下载。

http://pcmv.cn/thread-21889-1-1.html?fromuid=9

(出处: 机器视觉论坛)

NI Vision Builder for Automated Inspection 2018 SP1 Readme

May 2019

This file contains important information about NI Vision Builder for Automated Inspection (Vision Builder AI), including installation instructions, new features, and known issues.

Overview

System Requirements

Application Software Support

Installation Instructions

Product Security and Critical Updates

New Features

Supported Hardware

Behavior Changes

Known Issues

Bug Fixes

Accessing the Help

Finding Examples

Automating the Installation of NI Products

Software Requirements for Migrating an Inspection to LabVIEW

Using NI Software with Microsoft Windows 10

Using NI Software with Microsoft Windows 8.1

PC-Based Image Acquisition and I/O Support

Additional Resources

Legal Information

Overview

NI Vision Builder AI gives you an easy way to configure, benchmark, and deploy a system that addresses vision applications from pattern matching to code reading and presence detection to precision alignment and classification.

For information about licensing NI Vision software, visit ni.com/info and enter the Info Code LicenseVision. Refer to the NI Vision website at ni.com/vision for the latest information about NI Vision Builder AI.

System Requirements

NI Vision Builder AI 2018 SP1 has the following requirements:

	Minimum	Recommended
Processor	Pentium 4/M or equivalent	Core Duo or equivalent
Memory	512 MB RAM	1 GB RAM
Display	1,024 × 768 resolution video adapter with a 24- or 32-bit display	1,280 × 1,024 resolution video adapter with a 24- or 32-bit display
Operating System	Windows 10 (32- and 64-bit) Windows 10 IoT Enterprise LTSB 2016 (64-bit)3 Windows 8.1 (32- and 64-bit)1 Windows 7 SP1 (32- and 64-bit)2 Windows Embedded Standard 7 SP12,3 Windows Server 2012 R2 (64-bit)1 Windows Server 2008 R2 SP1 (64-bit)2
Browser	Microsoft Internet Explorer 6.0 or later
Hard Disk Space	7.7 GB	8.3 GB

Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW.

Note NI Vision Builder AI 2015 f2 dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. NI Vision Builder AI 2015 f2 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI Vision Builder AI 2015 f2 or later to an unsupported OS. Additionally, after installing NI Vision Builder AI 2015 f2 or later, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.

For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.

Note Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport.

1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.

2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.

3Only supported as pre-installed on NI hardware.

Application Software Support

NI Vision Builder AI 2018 SP1 supports the following application software versions, including service packs.

Application Software	Versions Supported by NI Vision Builder AI 2018 SP1
LabVIEW	2015, 2016, 2017, 2018[sup]1[/sup], 2019
LabWindows™/CVI™	2012, 2013, 2015, 2017, 2019

1 Required when using the NI Vision Builder AI Development Toolkit.

Note: NI Vision Builder AI 2018 SP1 dropped support for the .NET Vision Builder AI API.

Installation InstructionsInstalling Vision Builder AI

Complete the following steps to install Vision Builder AI:

Note: You must be logged in with administrator privileges to install Vision Builder AI.

Insert the Vision Builder AI DVD into your DVD-ROM drive. If the DVD does not run automatically, open Windows Explorer, right-click the DVD drive icon, and select AutoPlay.
Select Install Vision Builder for Automated Inspection on the National Instruments Vision Builder for Automated Inspection screen.
Vision Builder AI prompts you to enter your user information. Select one of the following options:
If you choose to enter a serial number, enter the serial number found on your Certificate of Ownership card. Vision Builder AI automatically uses this serial number when you run the NI Activation Wizard.

Install this product using the following serial number
Install this product for evaluation

Continue to follow the instructions on the screen.

Activating Vision Builder AI

If you do not activate a valid license, Vision Builder AI runs in evaluation mode and continues to prompt you to activate a license on each launch. At the end of the evaluation period you must activate a Vision Builder AI license to continue using the product.

Note: While Vision Builder AI is in Evaluation mode, all features are available except Migrate Inspection to LabVIEW.

Complete the following steps to activate the Vision Builder AI license:

Launch Vision Builder AI.
Click Yes when prompted to activate Vision Builder AI.
Ensure that Automatically activate through a secure Internet connection is selected, and click Next.
Continue to follow the instructions on the screen. Login or register your NI account with the NI Licensing Wizard and enter your serial number when prompted.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.

New Features

The following list describes the new features in Vision Builder AI 2018 SP1:

LabVIEW 2019 support

The following list describes the new features in Vision Builder AI 2018:

Map Defects Step

This step compares areas of an image to a template and returns the differences.

Validate System Testing

Perform regression testing by defining known images that pass and fail. As the inspection is updated, verify the expected results, and debug any errors.

Reconcile Resources

Reconcile differences between inspection and system resources when opening an inspection. The supported resources that can be reconciled include cameras, communication devices, and Vision RIO device settings.

Communication Device Simulator

View and edit communication data in Simulation mode from both the Configuration mode and Inspection mode.

Supported HardwareWindows-Based Device Support

You can use Vision Builder AI to configure and control the following Windows-based National Instruments devices:

NI CVS-1458 and 1459 Compact Vision Systems
NI IC-3120, 3121, 3171, and 3173 Industrial Controllers
NI ISC-178x Smart Cameras

Remote Target Support

You can use Vision Builder AI to remotely configure and control a supported remote target running NI Linux Real-Time. Vision Builder AI supports the following remote targets:

NI CVS-1458RT and 1459RT Compact Vision Systems
NI IC-3120, 3121, 3171, 3172, and 3173 Industrial Controllers
NI ISC-178x Smart Cameras

To use Vision Builder AI with a remote target, you must use Vision Builder AI to configure the remote target. For more information about using Vision Builder AI to configure the remote target, refer to the documentation included with the remote target or the NI Vision Builder for Automated Inspection: Configuration Help.

Note: National Instruments recommends using WebDAV to transfer files to and from a real-time target. For more information on using WebDAV to transfer files to and from a remote target, go to ni.com/info and enter the Info Code WebDAVTransfer.

The following table illustrates when a remote target requires you to install driver software on the development computer.

Remote Target or Camera Connected to a Remote Target	Requires Driver Software Installed on Development Computer
NI Smart Camera	No
IEEE 1394	No
GigE Vision	No

The following table illustrates which USB NI CompactDAQ chassis are supported by remote Vision Builder AI targets.

Remote Target	Supported USB NI CompactDAQ chassis
NI ISC-178x Smart Camera	NI cDAQ-9171 NI cDAQ-9174 NI cDAQ-9178
NI CVS-1458 and NI CVS-1459 Compact Vision System
NI IC-312x Industrial Controller
NI IC-317x Industrial Controller

Behavior Changes

The following list describes the changes and enhancements to existing features in Vision Builder AI 2018:

Updated UI appearance
Pattern Matching Step Improvements

Geometric Matching is now included in the Pattern Matching step so this single step supports all pattern matching algorithms.
Support for preset values to allow for easily configuring common pattern matching scenarios for improved ease of use.

Simulation Mode Improvements

Acquisition steps support a simulated frame rate to more accurately simulate a real acquisition with timeouts or images behind, as well as accurate camera timestamp results when available.
Support for the Read/Write Camera Attribute step adding read or write operations for any attribute available for a specific camera and caching the latest value for that attribute.
Support for editing or adding communication devices in simulation mode.

Data Logging Step Improvements

Support added for relative path when the inspection is saved on Windows, and the data logging path is relative to the inspection path.
Support added for user-defined column headers or the option for no headers.
Note: The legacy column headers that used 4 rows is not available for new steps. Older inspections that are migrated to Vision Builder AI 2018 SP1 will still have this option as well as the new column header format options.
Support added for user-selectable inspection results including a result for cycle time to better benchmark performance.
Support added for user-selectable digits of precision when logging numeric double data types.
Support added for appending timestamp to filename.
Support added for specifying the FTP port to allow for logging to a non-default port or allowing different steps to log to different FTP ports.
The TCP logging feature is no longer supported by the Data Logging step. Older inspections that were using this feature will now have the Data Logging step replaced by a TCP step configured to send the same data.
Support added for simulation mode to use a different path to log to on Windows that does not affect the original step settings for a path on the remote target.
Support added for the tree of measurements to scale as the window grows.

Image Logging Step Improvements

Support added for relative path when the inspection is saved on Windows, and the image logging path is relative to the inspection path.
Support added for AVIs to be saved on real-time targets.
Support added for the color palette to be saved with the image. The image is still saved as an 8-bit or 16-bit image, but the color palette affects how viewers display the image.
Support added for using any Boolean result to determine whether image logging should occur. Previously, only the inspection status could be used.
Support added for specifying the FTP port to allow for logging to a non-default port or allowing different steps to log to different FTP ports.
Support added for simulation mode to use a different path to log to on Windows that doesn't affect the original step settings for a path on the target.

Read Image from File Step Improvements (Formerly called Simulate Acquisition step)

Support added for relative path when the inspection is saved on Windows, and the image logging path is relative to the inspection path.
Support added to return AVI frame rate as a result of the step when reading images from an AVI.

Measure Intensity Step Improvements

Support added for returning the minimum and maximum pixel intensity at a user-specified percentile.

Calculator Step Improvements

Support added for renaming indicators without having to go to the Edit Input/Output dialog.
Support added for a tree of inputs and outputs to make viewing all the data in arrays easier.

Sauvola Local Threshold Algorithm Support

The Calibration Training Interface and the following steps now support this new local threshold algorithm: Classification, Count Pixels, Detect Object, and Threshold.

OPC UA Support on 64-bit Windows
Save Image Dialog Improvements

Support added for using the native Windows browse dialog to support common file operations, such as creating folders, navigating to common locations, and accessing network drives.
Support added for saving the color palette with the image.

Ease of Use Improvements

Support added for using the mouse wheel to zoom into and out of images, scroll through step palettes, or the scroll through a state's list of steps.
Support added for viewing the default inspection interface from Configuration mode.
Support added for a new Run Fast mode to achieve close to Inspection mode performance from the Configuration mode.
Support added for the Overlay step to use the last color and font settings by default when adding new overlays.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI website for an up-to-date list of known issues in NI Vision Builder AI 2018 SP1.

Bug Fixes

Refer to the NI website for an up-to-date list of all bug fixes in this release.

Accessing the Help

See Additional Resources.

Finding Examples

See Additional Resources.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.

If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.

For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:

For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Customize and Automate Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Customize and Automate Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, Determine Type and Version of My National Instruments Installer.

Software Requirements for Migrating an Inspection to LabVIEW

To migrate an inspection to LabVIEW, Vision Builder AI 2018 SP1 requires LabVIEW 2018 or later and NI Vision Development Module 2018 or later.

Some Vision Builder AI steps require additional software to successfully migrate an inspection to LabVIEW.

OPC UA requires the LabVIEW OPC UA Toolkit.
Ethernet/IP or Ethernet/IP adapter require NI-Industrial Communications for Ethernet/IP.

Refer to the following table for software requirements to migrate specific steps. Driver versions must support the target version of LabVIEW for migration.

Step Name	Requirement
Acquire Image	NI-IMAQ
Acquire Image (IEEE 1394, GigE, or USB)	NI-IMAQdx
Acquire Image (Smart Camera)	NI-IMAQdx
Generate Pulse	NI-IMAQ
Generate Pulse (Vision RIO)	NI-IMAQ I/O for PCIe-8237R and PCIe-825xR boards, and Compact Vision Systems NI Industrial Controller Device Drivers for industrial controllers
Read/Write I/O	NI-IMAQ
Read/Write I/O (NI-DAQmx)	NI-DAQmx
Read/Write I/O (Vision RIO)	NI-IMAQ I/O for PCIe-8237R and PCIe-825xR boards, and Compact Vision Systems NI Industrial Controller Device Drivers for industrial controllers

Note: NI-IMAQ, NI-IMAQdx, and NI-IMAQ I/O are available on the NI Vision Acquisition Software DVD included with Vision Builder AI. The NI Industrial Controller Device Drivers DVD is provided separately with industrial controller devices. To download NI-DAQmx, visit ni.com/downloads/products/.

Software Requirements for the Run LabVIEW VI Step

The Run LabVIEW VI step in Vision Builder AI 2018 SP1 supports VIs saved in LabVIEW 2018 or earlier.

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Using NI Software with Microsoft Windows 8.1

When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

PC-Based Image Acquisition and I/O Support

Vision Builder AI supports the following types of image acquisition and I/O devices:

National Instruments image acquisition devices
IEEE 1394 industrial digital cameras
GigE Vision cameras
DirectShow-compatible USB cameras
IP cameras
Digital or analog I/O from NI data acquisition (DAQ) devices
Serial devices

Note: You must install driver software to acquire images from an image acquisition device connected to the development computer.

National Instruments Image Acquisition Devices

This version of Vision Builder AI supports National Instruments image acquisition devices that require NI-IMAQ driver version 4.6.4 or later. Specific devices may require later versions.

Note: If you are using an image acquisition device, you must install NI Vision Acquisition Software before you install the image acquisition device. NI Vision Acquisition Software gives you access to Measurement & Automation Explorer (MAX), which is software you can use to configure National Instruments devices.

IEEE 1394 Cameras, GigE Vision Cameras, DirectShow-Compatible USB Cameras, and IP Cameras

This version of Vision Builder AI supports IEEE 1394 cameras, GigE Vision cameras, USB3 Vision, DirectShow-compatible USB cameras, certain IP cameras, and requires NI-IMAQdx driver version 3.3 or later. Specific devices may require later versions.

To acquire an image from one of these camera types when the camera is connected to the host computer, use the Acquire Image (1394, GigE, or USB) step. The Acquire Image (1394, GigE, or USB) step requires NI-IMAQdx, which can be installed from the NI Vision Acquisition Software DVD included with Vision Builder AI.

You must configure an IEEE 1394 camera to use the NI-IMAQdx driver. Complete the following steps to use MAX to configure an IEEE 1394 camera to use the NI-IMAQdx driver.

Launch MAX.
In the MAX configuration tree, expand Devices and Interfaces to obtain a list of installed devices.
Expand NI-IMAQdx Devices to obtain a list of available cameras.
Right-click the camera and select Driver»NI-IMAQdx IIDC Digital Camera.

NI Analog and Digital I/O Devices

This version of Vision Builder AI supports digital and analog I/O from any National Instruments data acquisition (DAQ) device using NI-DAQmx Global Virtual Channels. To support NI DAQ devices, Vision Builder AI requires NI-DAQmx 8.0 or later.

Serial Communication

To support serial communication, Vision Builder AI requires NI-VISA 2.6.0 or later, which is included with Vision Builder AI. You can use the serial ports built into the PC or one of the following NI serial interfaces: NI PCI-232/x, NI PXI-8420/x, or NI PXI-8422/x. You do not need to install NI-VISA on the PC to use the serial port on a remote target.

Deployment Policy for Vision Builder AI

Pursuant to the National Instruments Software License Agreement, Vision Builder AI software is licensed to run on only one machine. Deployed applications that use Vision Builder AI require that Vision Builder AI be installed and licensed on each host machine. Therefore, you must purchase a separate Vision Builder AI license for each host machine. For more information, refer to the enclosed National Instruments Software License Agreement or visit ni.com/legal/license.

Licensing Options

For information about licensing NI Vision software, visit ni.com/info and enter the Info Code LicenseVision. Vision Builder AI offers the following licensing options:

Vision Builder AI Full-Featured (778649-35)—Allows full access to all Vision Builder AI features, which can be used to configure, benchmark, and deploy inspections. This license does not include the Vision Builder AI Development Toolkit.
Vision Builder AI Full-Featured for NI Real-Time Targets—Allows full access to all Vision Builder AI features on supported real-time targets, which can be used to configure, benchmark, and deploy inspections. This license is only included with certain hardware targets and does not include the Vision Builder AI Development Toolkit.
Vision Builder AI Runtime (779799-35)—Allows you to deploy existing inspections to a Windows-based host machine and modify the control values for steps in an inspection. This license does not allow you to add steps to or remove steps from an inspection.
Vision Builder AI Development Toolkit (779343-35)—Licenses only the Vision Builder AI Development Toolkit, which allows you to create custom steps for use in any Vision Builder AI application.

Windows Firewall

If you are using the Windows Firewall and launch Vision Builder AI, a dialog box may prompt you to allow Vision Builder AI to receive information over the network. Select Allow access so that Vision Builder AI can communicate with your remote target.

Additional ResourcesHow do I get started?

Read the NI Vision Builder for Automated Inspection Tutorial, which provides exercises for learning how to perform basic machine vision techniques using Vision Builder AI.

Where can I find reference information?

Reference information for Vision Builder AI can be accessed through the following methods:

From within Vision Builder AI by clicking the Show Context Help button.
Select Start»All Programs»National Instruments»Vision Builder AI 2018»Vision Builder AI 2018 Documentation on your PC.

The following documents are provided with Vision Builder AI as online help:

NI Vision Concepts Help—Contains basic concepts of image analysis, image processing, and machine vision. This document also contains in-depth discussions about imaging functions for advanced users.
NI Vision Builder for Automated Inspection: Configuration Help—Contains information about the Vision Builder AI Configuration interface, managing inspections and images, and creating steps for an inspection.
NI Vision Builder for Automated Inspection: Inspection Help—Contains information about using the Vision Builder AI Inspection interface to run inspections.

Use the Search tab in the help files to quickly locate specific information. For information about how to use the search functionality, refer to the Using Help»Searching Help topic in the help file.

The following documents are provides with Vision Builder AI as Adobe PDF documents:

Vision Builder for Automated Inspection Tutorial—Describes Vision Builder for Automated Inspection and provides step-by-step instructions for solving common visual inspection tasks, such as inspection, gauging, part presence, guidance, and counting.
NI Vision Builder for Automated Inspection Development Toolkit Tutorial—Contains instructions for using LabVIEW to create custom steps for Vision Builder AI.

Where can I find examples?

Access examples of common Vision Builder AI inspections by selecting Start»All Programs»National Instruments»Vision Builder AI 2018»Vision Builder AI 2018 Examples on your PC.

Where else can I go for Vision Builder AI information?

Visit ni.com/vision and the NI Developer Zone at ni.com/zone for the most up-to-date information about Vision Builder AI.

Legal Information

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

Notices are located in the <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.

375131E-01

下载中心

NI Vision Builder for Automated Inspection 2018SP1 Win32/64Eng 自动检测视觉生成器VBAI19.0 LabVIEW2019版适用