Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html
NI Vision Builder for Automated Inspection 2011 Win32Eng 自动检测视觉生成器VBAI2011 LabVIEW2011版适用
NI机器视觉、图像处理软件。不需要学习太多编程知识,即时使用验证。可脱离LabVIEW编程平台,独立完成检测任务。可应用于NI智能相机、嵌入式视觉平台等。石鑫华视觉珍。百度网盘下载与NI官方下载:
NI Vision Builder for Automated Inspection 2011 VBAI2011(2011.8.2)
百度云盘下载:
ZIP版:
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 购买附件下载查看
ISO版:
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 购买附件下载查看
NI官方下载地址(可能无效或无法下载完成):
购买附件下载查看
NI Vision Builder for Automated Inspection 2011 Win32Eng 自动检测视觉生成器VBAI2011 LabVIEW2011版适用
http://pcmv.cn/thread-729-1-1.html?fromuid=9
(出处: 机器视觉论坛)
NI Vision Builder for Automated Inspection 2011 Readme
System Requirements
Minimum | Recommended | |
Processor | Pentium 4/M or equivalent | Core Duo or equivalent |
Memory | 512 MB RAM | 1 GB RAM |
Display | 1,024×768 resolution video adapter with a 24- or 32-bit display | 1,280×1,024 resolution video adapter with a 24- or 32-bit display |
Operating System | Microsoft Windows 7/Vista/XP/Server 2003 R2 (32-bit)/Server 2008 R2 | |
Browser | Microsoft Internet Explorer 5.0 or later | |
Hard Disk Space | 1 GB |
Installation Instructions
Insert the Vision Builder AI DVD into your DVD-ROM drive. If the DVD does not run automatically, open Windows Explorer, right-click the DVD drive icon, and select AutoPlay.
Select Install Vision Builder for Automated Inspection on the National Instruments Vision Builder for Automated Inspection screen.
Vision Builder AI prompts you to enter your user information. Select one of the following options:
Install this product using the following serial number
Install this product for evaluation
Continue to follow the instructions on the screen.
Activation Instructions
Launch Vision Builder AI.
Click Yes when prompted to activate Vision Builder AI.
Ensure that Automatically activate through a secure Internet connection is selected, and click Next.
Enter your serial number, and click Next.
Enter your registration information, and click Next.
You can enter an email address to receive a copy of the activation code for your records.
Deployment Policy for Vision Builder AI
Licensing Options
Vision Builder AI Full-Featured (778649-01)—Allows full access to all Vision Builder AI features, which can be used to configure, benchmark, and deploy inspections. This license does not include the Vision Builder AI Development Toolkit.
Vision Builder AI Run-Time (779799-03)—Allows you to deploy existing inspections to a host machine and modify the control values for steps in an inspection. This license does not allow you to add steps to or remove steps from an inspection.
Vision Builder AI Development Toolkit (779343-03)—Licenses only the Vision Builder AI Development Toolkit, which allows you to create custom steps for use in any Vision Builder AI application.
New Features
NI 177x Smart Camera support. Use the Acquire Image (Smart Camera) step to configure an acquisition and acquire images from any NI 177x Smart Camera.
New Max Caliper step. Use the Max Caliper step to obtain precise maximum distance measurements based on contour extraction.
Updated calibration features. Vision Builder AI now supports spatial calibrations that model perspective distortion, rectilinear lens distortion, or camera model parameters such as focal length and optical axis position. You can access the NI Calibration Training Interface from the Calibrate Image step or from the Calibration tab on any acquisition step.
New C API. Use the C API to control Vision Builder AI from C and C++ development enviroments, such as LabWindows/CVI, or .NET development environments, such as Microsoft Visual Studio 2005 or 2008.
Updated Welcome Screen. The Vision Builder AI Welcome screen has been updated. Use the icons to the right of the target list to manage a selected target:
Refresh Target List—Refresh the list of available remote target devices.
Add Target—Add a new remote target device to the list.
Add Simulated Target—Add a simulated remote target device to the list of targets. Use a simulated to develop an inspection for deployment when the actual remote target is not available.
Configure Target—Configure the selected remote target device.
Updates
ID | Fixed Issue |
87420 | If you click Run Once while editing the Match Pattern step, the step does not reposition the region of interest. |
254434 | Vision Builder AI returns an error message if you try to edit an Image Acquisition step after using a template to create a new inspection for a NI-IMAQ framegrabber while a camera is not connected. |
256019 | In the Vision Assistant step, the Multiply Divide operator does not work as expected. |
256156 | In the Vision Assistant step, the operator functions return an error if you supply two images of different types, even if the images are the same size. |
256177 | Initial Step Size and Final Step Size values are always reset to 1 when editing the Detect Texture Defect step. |
257054 | Pressing <font face="" "="" style="margin: 0px; padding: 0px; overflow-wrap: break-word;"><Delete> produces a response when editing the State Diagram, even if Vision Builder AI is not the active window. |
257928 | If a Run LabVIEW step running on a remote target calls a broken VI, the step returns error messages that cannot be interrupted without restarting Vision Builder AI. |
275942 | Changing remote target settings on the Date & Time tab have no effect. |
276327 | When using the Vision Builder AI LabVIEW API, opening the inspection can take more than 30 seconds on Windows if a mapped network drive is not reachable. |
276332 | The Read/Write (NI-IMAQ I/O) step does not detect changes for isolated input lines 8, 9 or 10. |
277593 | When migrating an inspection with a custom user interface to LabVIEW on a Windows operating system, the behavior of the resulting front panel is set to modal. |
278449 | Some Inspect Contours step results are not available in the Geometry step. |
281223 | You must reboot the device after changing the serial baud rate for a compact vision system in order for the change to take effect. |
282521 | The Data Logging step does not work properly after migrating an inspection to LabVIEW when the Log as Backround Task checkbox is enabled. |
283246 | The Image Logging step does not work properly after migrating an inspection to LabVIEW when the Log as Backround Task checkbox is enabled. |
283355 | In the Calculator step, the context menu does not appear when you right-click an existing function. |
283579 | When using the Vision Builder AI LabVIEW API, the Result Timestamp is identical for all results. |
284838 | In the VBAI Custom Overlay step, element names revert to original values after editing an element name and closing the step. |
284907 | When a Serial I/O step is inserted in the Select Inspection state, Serial I/O steps in other inspection states use the default baud rate. |
285726 | Maximizing VBAI when using dual displays might crop the right portion of the window. |
288549 | It is impossible to close the error message after trying to open the same inspection in multiple instances of Vision Builder AI. |
290648 | It is impossible to create custom Vision Builder AI steps after installing a Vision Development Module service pack. |
292846 | When using the Vision Builder AI LabVIEW API, the Vision Builder AI communication device server closes when the connection to the Vision Builder AI Engine is closed. |
295365 | In the Find Circular Edge step, the Edge Strength graph is not populated properly. |
299239 309030 | When using a Japanese-language operating system, In the Read/Verify Text step, recognized Japanese character text is not displayed properly in the Char column of the results table on the Limits tab. |
304702 | It is possible to create an inspection where the calibration is unusable if the inspection is opened on another device. |
306858 | After running an inspection that contains a Serial I/O step in the Select Inspection state from the Inspection Interface, the Serial I/O step does not function in the Configuration Interface. |
307322 | When using a Japanese-language operating system, Japanese characters are not displayed correctly on the Vision Builder AI Welcome screen. |
307456 | When opening the Adv. Straight Edge step with the Suggest Values checkbox enabled while operating on a large image, Vision Builder AI might exceed 10 % CPU usage. |
307628 | The Vision Builder AI LabVIEW API unnecessarily attempts to load dll files for features that are not installed. |
Remote Target Support
NI 17xx Smart Cameras
NI 177x Smart Cameras
NI CVS-1450 Series Compact Vision Systems
NI EVS-1463RT Embedded Vision Systems
NI EVS-1464RT Embedded Vision Systems
Remote Target Camera Type | Requires Driver Software Installed on Development Computer |
NI Smart Camera | No |
IEEE 1394 | No |
GigE Vision | No |
Camera Link | Yes |
PC-Based Image Acquisition and I/O Support
National Instruments image acquisition devices
IEEE 1394 industrial digital cameras
GigE Vision cameras
DirectShow-compatible USB cameras
IP cameras
digital or analog I/O from NI data acquisition (DAQ) devices
serial devices
National Instruments Image Acquisition Devices
|
|
|
|
IEEE 1394 Cameras, GigE Vision Cameras, DirectShow-Compatible USB Cameras, and IP Cameras
Camera Type | Minimum Required NI-IMAQdx Version | Supported NI Host Adapters |
IEEE 1394 Cameras | 3.0 | NI PXI/PCI-8252, NI PCI-8254R, NI PCIe-8253, NI PCIe-8255R |
GigE Vision Cameras | 3.0 | NI PCIe-8231, NI PCIe-8235, NI PXIe-8234 |
DirectShow-Compatible USB Cameras* | 3.4 | — |
IP Cameras | 3.5 | — |
*Verify that the camera driver supports DirectShow and that the camera driver is installed correctly. For specific information about drivers and camera compatibility, consult your camera manufacturer documentation. |
Launch MAX.
In the MAX configuration tree, expand Devices and Interfaces to obtain a list of installed devices.
Expand NI-IMAQdx Devices to obtain a list of available cameras.
Right-click the camera and select Driver»NI-IMAQdx IIDC Digital Camera.
NI Analog and Digital I/O Devices
Serial Communication
Known Issues
General
Vision Builder AI does not support U16 images.
Vision Builder AI behaves unexpectedly or may not display an inspection image if the image is large and your computer is low on available memory.
If you configure a step to generate a status based on pixel values and subsequently calibrate the image, the step will compare calibrated values against pixel-based limits and might fail.
The Geometric Matching step generates an initialization error if the range specified for Scaled matches is large enough to cause the target to run out of memory.
When connected to a remote target in the Configuration interface, the TCP Communication Terminal is not updated if you select an Operate»Run Inspection option.
When connected to a remote target in the Configuration interface, the Serial Communication Terminal is not updated if you select an Operate»Run Inspection option.
Calculator step performance may decrease if the Display Result Image for this State checkbox is enabled.
The number of logged images resets if an inspection that contains an Image Logging step is closed and opened.
When connected to a remote target, the Configuration interface does not execute the Cleanup state.
After connecting to a remote target and starting an inspection in the Vision Builder AI Configuration interface, if you lose communication and reconnect to the target the inspection opens in the Vision Builder AI Inspection interface.
LabVIEW Project Integration
You can create a new VI in the context of a remote target added in Vision Builder AI Mode. A VI created in this context cannot run or support shared variables. If you try to add a shared variable to the VI, the VI generates an error message indicating that the target does not support shared variables. Always create a VI in the context of My Computer or a remote target added in LabVIEW Real-Time Mode.
When you add a NI Smart Camera or NI 1460RT Series Embedded Vision System to a LabVIEW project in Vision Builder AI Mode and the target and development computer are located on different subnets, shared variables are not automatically listed for the target. To list shared variables, right-click the target and select Connect.
Vision Builder AI Development Toolkit
When using the Vision Builder AI Development Toolkit, you must close all open LabVIEW VIs before attempting to create a new step or importing a step from a previous version of Vision Builder AI.
Windows Firewall
Microsoft Windows 7, Windows Vista, Windows Server 2008, Windows Server 2003, or Windows XP with Service Pack 2 (SP2) or later installed
When you launch Vision Builder AI, a dialog box may prompt you to allow Vision Builder AI to receive information over the network. Depending on your operating system, select Allow access or Unblock this program so that Vision Builder AI can communicate with your remote target.
Microsoft Windows XP with Service Pack 1 (SP1) installed
If the Microsoft Windows XP Internet Connection Firewall (ICF) is enabled, Vision Builder AI cannot discover or configure remote targets unless you disable the ICF. Perform the following steps to disable the Internet Connection Firewall:
From your desktop, open Network Connections by selecting Start»Control Panel»Network Connections.
Double-click the connection you want to modify.
Click Properties.
On the Advanced tab, clear the Protect my computer and network by limiting or preventing access to this computer from the Internet checkbox.
Additional ResourcesHow do I get started?
Where can I find reference information?
NI Vision Concepts Help—Contains basic concepts of image analysis, image processing, and machine vision. This document also contains in-depth discussions about imaging functions for advanced users.
NI Vision Builder for Automated Inspection: Configuration Help—Contains information about the Vision Builder AI Configuration interface, managing inspections and images, and creating steps for an inspection.
NI Vision Builder for Automated Inspection: Inspection Help—Contains information about using the Vision Builder AI Inspection interface to run inspections.
NI Vision Builder for Automated Inspection: ActiveX Component Reference Help—Contains information about the ActiveX objects available to embed Vision Builder AI inspections into ActiveX applications.
Vision Builder for Automated Inspection Tutorial—Describes Vision Builder for Automated Inspection and provides step-by-step instructions for solving common visual inspection tasks, such as inspection, gauging, part presence, guidance, and counting.
NI Vision Builder for Automated Inspection Development Toolkit Tutorial—Contains instructions for using LabVIEW to create custom steps for Vision Builder AI.
Where can I find examples?
Where else can I go for Vision Builder AI information?