Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI RFmx CDMA2000 2.0 Full Win32/64ENG完整版下载
RFmx CDMA2000
RFmx CDMA2000为cdmaOne和CDMA2000 1xRTT蜂窝测试应用提供信号生成和分析功能。
RFmx CDMA2000是一款测量专用软件，旨在扩展NI RF仪器生成和分析CDMA2000蜂窝信号的能力。该软件可以通过误差矢量幅度(EVM)、码域误差(CDE)、相邻信道泄漏比(ACLR)、频谱发射屏蔽(SEM)等符合标准的物理层测量，对cdmaOne (IS-95)和CDMA2000 1xRTT (IS-2000)反向链路信号进行分析。借助RFmx，您可通过交互式软面板快速轻松地执行和调试测量，使用RFmx Waveform Creator创建和回放开放的未锁定波形，并结合更高性能的API加快自动化测试的速度。
发布日期：
2015/10/16
包含的版本：
2.0完整版
受支持的操作系统：
Windows Server 2008 R2 64-bit
Windows 8.1
Windows 7
应用程序位数：
32/64位
语言：
英文
校验和：
文件大小: 677471008 字节 (646.09 MB)
修改日期: 2015-10-16 05:10
MD5: efcab024ad6790b3803b34c6540d2de4
SHA1: 4124e3ff6214fa0ca03fdaa0f094fd118ff7aa74
SHA256: cdd4159d9b225c8c7aeb2bd86f6699698ffb0f71f1644c23d71ce3fa7ef2a9e9
CRC32: 1df12266
百度网盘与NI官方下载地址：
注册登陆视觉论坛，购买附件查看下载地址
NI RFmx CDMA2000 2.0 Full Win32/64ENG完整版下载
http://pcmv.cn/thread-28352-1-1.html?fromuid=9
(出处: 机器视觉论坛)
NI-RFmx CDMA2k 2.0 Readme
October 2015
Thank you for using NI-RFmx CDMA2k. This file contains important information about NI-RFmx CDMA2k and is organized into the following sections:
Installation Instructions
Caution Before you install NI-RFmx CDMA2k 2.0, ensure that you have uninstalled all related NI-RFmx 1.0 products.
NI-RFmx drivers requires that all the installed driver versions remain the same for proper functionality because NI-RFmx drivers use shared components between them. If driver incompatibilities exist, they are reported through a dialog box after installation. You can also use the Version Compatibility Checker utility to manually check for version incompatibilities. Refer to the
Installed Software, Documentation, and Examples section for more information about the installed location of the Version Compatibility Checker utility.
Supported HardwareVector Signal Analyzers
NI PXIe-5663
NI PXIe-5663E
NI PXIe-5665
NI PXIe-5668R
Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help.
Vector Signal Transceivers
NI PXIe-5644R
NI PXIe-5645R
NI PXIe-5646R
Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.
System RequirementsSupported Operating Systems
NI-RFmx CDMA2k 2.0 supports the following operating systems:
Windows 10 (32-bit and 64-bit)
Windows 8.1 (32-bit and 64-bit)
Windows 8.0 (32-bit and 64-bit)
Windows 7 (32-bit and 64-bit)
Windows Server 2008 R2 (64-bit)
Note NI-RFmx CDMA2k 2.0 does not support Windows Server non-R2 editions.
NI recommends that you have the most recent service pack for your operating system installed.
Minimum System Requirements
Processor—Intel i3 or equivalent
RAM—2 GB*
Microsoft Internet Explorer 5.5 or later
A screen resolution of 1,300 x 700 with 256 colors
Windows 10/8.1/8.0/7, with all available critical updates and service packs
*Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.
Recommended System
Processor—Intel i5 or equivalent
RAM—4 GB*
Microsoft Internet Explorer 5.5 or later
A screen resolution of 1,300 x 700
Windows 10/8.1/8.0/7, with all available critical updates and service packs
*Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.
Application Development Environments (ADEs)
Note NI-RFmx CDMA2k does not operate correctly without the LabVIEW service packs and patches mentioned in the preceding list.
Note Install NI LabVIEW before you install NI-RFmx CDMA2k. To add support for ADEs installed after installing NI-RFmx CDMA2k, modify your NI-RFmx CDMA2k installation or relaunch the NI-RFmx CDMA2k installer.
Other Required Software
Installed Software, Documentation, and Examples
File Locations
| Item | Installed Location on Windows 10/8.1/8.0/7 |
| Version Compatibility Checker | <NIDir>RFmx
iRFmxCompatibility_Checker.exe |
| DLLs | <SYSDIR> |
| LabVIEW Examples | <NIDir>LabVIEW <version>examplesRFmxCDMA2k |
Executable
Select Start»All Programs»National Instruments»NI-RFmx CDMA2k»NI-RFmx CDMA2k Measurement Interactive Panel to launch the NI-RFmx CDMA2k Measurement Interactive Panel.
Documentation
Documentation for NI-RFmx CDMA2k is located at Start»All Programs»National Instruments»NI-RFmx CDMA2k»NI-RFmx CDMA2k Documentation. The documentation set is composed of the following documents.
| Document | Format | Description |
| NI-RFmx CDMA2k Help | HTML/Windows Help | Information about NI-RFmx CDMA2k. This help file is an HTML version of a traditional user manual that includes the following information:An introduction to NI-RFmx CDMA2k How to get started with application development A complete reference for all NI-RFmx CDMA2k programming functions
|
| NI-RFmx CDMA2k 2.0 Readme | HTML (this document) | Information about supported hardware, supported operating systems, and legal notices. |
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.
Accessing VIs and Functions
NI-RFmx CDMA2k palette VIs are available from the Functions»Measurement I/O»NI-RFmx»CDMA2k palette.
Finding Examples
You can access all the installed NI-RFmx CDMA2k examples at Start»All Programs»National Instruments»NI-RFmx CDMA2k»NI-RFmx CDMA2k Examples.
Product Security and Critical Updates
Visit
ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit
ni.com/critical-updates for information about critical updates from National Instruments.
Uninstalling/Modifying NI-RFmx CDMA2k
For Windows 7, complete the following steps:
Launch the Control Panel by selecting Start»Control Panel.
Double-click Programs and Features.
Select National Instruments Software.
Click the Uninstall/Change button.
Select NI-RFmx CDMA2k 2.0 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
For Windows 10/8.1/8.0, complete the following steps:
Right-click on the Start screen.
Select All apps, and launch the Control Panel.
Select Programs» Programs and Features.
Select National Instruments Software.
Click the Uninstall button.
Select NI-RFmx CDMA2k 2.0 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
As part of the NI-RFmx CDMA2k 2.0 installation, the following software is installed. To completely remove the NI-RFmx CDMA2k 2.0 installation from your system, you must also remove the following package:
Note Do not attempt to uninstall by manually deleting files.
Known Issues
You can access the software and documentation known issues list online. Refer to the
NI-RFmx CDMA2k 2.0 Known Issues at ni.com for an up-to-date list of known issues in NI-RFmx CDMA2k 2.0.
Increasing Available Memory For Your Application
When developing memory intensive applications, you may encounter memory limits because 32-bit Windows applications utilize only 2 GB of memory by default. To expand the amount of memory an application can utilize, you can configure the executable to be large address aware to gain access to up to 3 GB of memory on a 32-bit Windows operating system and up to 4 GB of memory on a 64-bit Windows operating system.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit
ni.com/windows10.
Using NI Software with Microsoft Windows 8.x
When you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.
Using NI Launcher
NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
| Note NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch NI MAX either from the Apps view or from within NI Launcher. |
Pinning Frequently Used Applications
For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary.
| Current Application | Icon Location | Pin to Action |
| Windows 8.x Desktop | Desktop Taskbar | Right-click application and select Pin to Taskbar |
| Windows 8.x Desktop | Start screen | Right-click application and select Pin to Start |
| Windows 8.x Start screen | Desktop Taskbar | Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen |
Finding All Programs
If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All apps (Windows 8) or click the down arrow on the bottom left of the screen (Windows 8.1).
For more information about NI support for Windows 8.x, visit
ni.com/windows8.
Legal Information
Copyright
© 2015 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at
ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at
ni.com/patents.
375524A-01
