石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

LabVIEW Instrument Design Libraries for Vector Signal Transceivers 13.0 Win32/64Eng LabVIEW2013矢量信号收发仪仪器设计库NIVST13.0

文章来源:石鑫华视觉网时间:2022-06-16 16:14:01 点击:190

Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活,以下链接可下载:
NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

LabVIEW Instrument Design Libraries for Vector Signal Transceivers 13.0 Win32/64Eng LabVIEW2013矢量信号收发仪仪器设计库NIVST13.0

LabVIEW Instrument Design Libraries for Vector Signal Transceivers矢量信号收发仪仪器设计库
LabVIEW Instrument Design Libraries for Vector Signal Transceivers提供的仪器功能可帮助您在PXI矢量信号收发仪(VST)上对FPGA进行编程。
LabVIEW Instrument Design Libraries for Vector Signal Transceivers是用于PXI VST的驱动程序软件,可提供软件库。这些软件库可帮助主机和FPGA实现常见的仪器功能(例如硬件配置和数据通信),从而简化与VST上供应商代码的连接。LabVIEW Instrument Design Libraries for Vector Signal Transceivers包含基础板卡、多记录采集、波形定序器、触发器同步、嵌入式配置等库。

13.0
文件大小: 1383260960 字节 (1.29 GB)
修改日期: 2014-03-28 00:00
MD5: 7aef8c1bfea1f09ff1af83158d363f9c
SHA1: 46519bb8f667548bc6ca778e7d7d804a945e341b
SHA256: 8e267d397f85cb55a43e4132044c790f85b7b8c49d47adfe22663c703bf12e4c
CRC32: 47490c43

百度网盘和NI官方下载地址:

LabVIEW Instrument Design Libraries for Vector Signal Transceivers 13.0 Win32/64Eng LabVIEW2013矢量信号收发仪仪器设计库NIVST13.0

http://pcmv.cn/thread-28061-1-1.html?fromuid=9

(出处: 机器视觉论坛)



NI PXIe-5644R/5645R Instrument Design Libraries Readme

Version 13.0.0

Thank you for using NI PXIe-5644R/5645R Instrument Design Libraries (instrument design libraries). This file contains important information about the instrument design libraries and is organized into the following sections:
  • Supported Hardware

  • System Requirements

  • Installed File Names and Locations

  • Updates and Notifications

  • Uninstalling/Modifying Instrument Design Libraries

  • Known Issues

  • Automating the Installation of NI Products

  • How to Use NI Software with Microsoft Windows 8

  • NI PXIe-5644R/5645R Instrument Design Libraries Drops Support for Microsoft Windows XP and Windows Server 2003 in 2016

  • Important Information


Supported Hardware

The instrument design libraries support the NI PXIe-5644R and NI PXIe-5645R RF vector signal transceivers (VSTs).

System RequirementsSupported Operating Systems

The instrument design libraries support the following operating systems:
  • Windows 8 (32-bit and 64-bit)

    Note  LabVIEW FPGA compilations cannot be executed on a machine running Windows 8. Refer to Cannot Compile FPGA VIs on a Windows 8 Computer for more information.
  • Windows 7 (32-bit and 64-bit)

  • Windows Vista (32-bit and 64-bit)

  • Windows XP Service Pack 3 (32-bit)

NI recommends that you have the most recent service pack for your operating system installed.
Note  You must have a 64-bit OS to compile LabVIEW FPGA code.

Supported Real-Time Operating Environments

The instrument design libraries support the LabVIEW Real-Time Module 2013 real-time operating environment.

Minimum System Requirements

  • Processor—Pentium 4 or equivalent

  • RAM—2 GB

  • Microsoft Internet Explorer 5.5 or later

  • A screen resolution of 1,024 x 768 pixels

  • Windows 8/7/Vista/XP SP3, with all available critical updates and service packs

Note  You must have a 64-bit OS to compile LabVIEW FPGA code.

Recommended System

  • Processor—Intel i7 or equivalent

  • RAM—6 GB

  • Windows 7 (64-bit), with all available critical updates and service packs

Tip  NI recommends that you have 8 GB or more of system memory for compiling LabVIEW FPGA code.

Application Development Environments (ADEs) and Application Software

  • LabVIEW 2013 (32-bit)
    Note  NI PXIe-5644R/5645R Instrument Design Libraries 13.0.0 (this version) supports LabVIEW 2013 (32-bit) only. For LabVIEW 2012 SP1 (32-bit) support, use NI PXIe-5644R/5645R Instrument Design Libraries 2012.1 available by visiting ni.com/info and entering vst2012.

  • (optional) LabVIEW FPGA Module 2013

  • (optional) LabVIEW Real-Time Module 2013

  • NI PXIe-5644R/5645R Instrument Design Libraries 13.0.0

Installed File Names and LocationsFile Locations

ItemInstalled Location on Windows 8 (32-bit)/7 (32-bit)/Vista (32-bit)/XP:
Instrument design librariesProgram FilesNational InstrumentsLabVIEW 2013instr.libRF-RIO
Self-calibration executableProgram FilesNational InstrumentsNI VSTSelf Calibration
Calibration support for LabVIEWProgram FilesNational InstrumentsLabVIEW 2013instr.lib iVSTCalibration


ItemInstalled Location on Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit)
Instrument design librariesProgram Files (x86)National InstrumentsLabVIEW 2013instr.libRF-RIO
Self-calibration executableProgram Files (x86)National InstrumentsNI VSTSelf Calibration
Calibration support for LabVIEWProgram Files (x86)National InstrumentsLabVIEW 2013instr.lib iVSTCalibration

Additional Calibration File Locations

Note  $(NIEXTCCOMPILERSUPP) is configured as an environment variable on the target system. The variable evaluates by default to Program FilesNational InstrumentssharedExternalCompilerSupportC on a 32-bit system.
ItemInstalled Location on Windows 8 (32-bit and 64-bit)/7 (32-bit and 64-bit)/Vista (32-bit and 64-bit)/XP:
Calibration header files<$(NIEXTCCOMPILERSUPP)>include
Calibration import libraries<$(NIEXTCCOMPILERSUPP)>lib32msvc

Documentation

Documentation is available at Start»All Programs»National Instruments»Vector Signal Transceivers»LabVIEW. The documentation set is composed of the following documents:
  • NI RF Vector Signal Transceivers Readme

  • Getting started guide for your device—Printed and PDF format. Contains instructions for installing software and hardware, making first measurements, and troubleshooting information.

  • NI RF Vector Signal Transceivers Help—HTML help format. Contains hardware reference information, an overview of the hardware functions, and information about designing application-specific instrumentation.

  • Getting Started With Your NI Vector Signal Transceiver (VST)—Web page. Contains resources for designing application-specific instrumentation for your VST. Available at ni.com/vstgettingstarted.

  • Specifications for your device—Printed and PDF format. Provides signal information and specifications.

  • Calibration procedures for your device—PDF format. Provides instructions for calibrating your VST. The latest procedures are available at ni.com/calibration.

Note  To view PDF documents, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.

Updates and Notifications

National Instruments releases critical software updates after product release using the NI Update Service. Visit ni.com/info and enter updates to view a list of all currently available updates.
National Instruments provides notification of certain critical issues at install time. Visit ni.com/info and enter notifications to view a list of current product notifications.

Uninstalling/Modifying Instrument Design Libraries

Perform the following procedure to uninstall the instrument design libraries:
For Windows XP, complete the following steps:
  • Launch the Control Panel by selecting Start»Control Panel.

  • Double-click Add or Remove Programs.

  • Select National Instruments Software.

  • Click Change/Remove.

  • Select NI PXIe-5644R/5645R Instrument Design Libraries 13.0.0 from the dialog box that appears.

  • Click Remove to uninstall the product; click Modify to change the components that are installed.

For Windows 7/Vista, complete the following steps:
  • Launch the Control Panel by selecting Start»Control Panel.

  • Double-click Programs and Features.

  • Select National Instruments Software.

  • Click the Uninstall/Change button.

  • Select NI PXIe-5644R/5645R Instrument Design Libraries 13.0.0 from the dialog box that appears.

  • Click Remove to uninstall the product; click Modify to change the components that are installed.

For Windows 8, complete the following steps:
  • Right-click the Start screen.

  • Select All apps and launch the Control Panel.

  • Select Programs» Programs and Features.

  • Select National Instruments Software.

  • Click the Uninstall button.

  • Select NI PXIe-5644R/5645R Instrument Design Libraries 13.0.0 from the dialog box that appears.

  • Click Remove to uninstall the product; click Modify to change the components that are installed.

As part of the instrument design libraries installation, the following software is installed. To completely remove the instrument design libraries from your system, you must also remove all of the following packages:
  • NI PXI Platform Services 3.2.3

  • NI System Configuration Runtime 5.5

  • NI-RIO 13.0

  • NI-RIO 13.0 for LabVIEW Real-Time

  • NI Measurement & Automation Explorer 5.5

Caution  Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.
Note  Do not attempt to uninstall by manually deleting files.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI PXIe-5644R/5645R Instrument Design Libraries 13.0.0 Known Issues at ni.com for an up-to-date list of known issues in the instrument design libraries.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information, refer to the following KnowledgeBase articles:
  • For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.

  • For more information about silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.

  • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.

How to Use NI Software with Microsoft Windows 8

When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
Note  MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8. You can launch MAX either from the Start screen or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
Current ApplicationIcon LocationPin to Action
Windows 8 DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
Windows 8 DesktopStart screenRight-click application and select Pin to Start
Windows 8 Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.
For more information about NI support for Windows 8, visit ni.com/windows8.

NI PXIe-5644R/5645R Instrument Design Libraries Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

National Instruments PXIe-5644R/5645R Instrument Design Libraries will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of instrument design libraries that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
ProductInfo Code
NI LabVIEWlifecycle
NI LabWindows/CVIcvi_lifecycle
NI Measurement Studiomstudiolifecycle
NI TestStandtslcp
NI DIAdemddlcp
NI SignalExpressselcp
NI VeriStandnivslifecycle

Important Information

Copyright
© 2012-2013 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
  • Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

  • EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

  • Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.


首页
84162741QQ
联系