Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI-RFmx Demod/Analog Modulation/Digital Modulation 19.0 Full Win32/64Eng NI-RFmx解调/模拟调制/数字调制19.0完整版
RFmx模拟调制
RFmx模拟调制为测试应用提供模拟调制信号的生成和分析。
RFmx Analog Modulation是运行在RFmx解调器内的应用软件，它与RFmx Analog Modulation一起安装。该软件可扩展NI RF仪器对于模拟调制信号生成和分析的能力。您可以使用该软件，通过对频率/相位偏移、模拟调制深度、频率/相位偏差等的测量，分析AM、FM、PM和FM的立体声信号。此外，您可以通过应用去加重和音频滤波器来分析解调后的信号波形、频谱和失真。您可以通过交互式软件前面板进行和调试测量，利用随附的RFmx Waveform Creator创建和回放开放的、未锁定的波形，并利用性能优化的API加快自动测试。
19.0x86/64
文件大小: 776462336 字节 (740.49 MB)
修改日期: 2020-03-11 20:48
MD5: ebc90d162d76a9aaae39f2277d633ede
SHA1: 989ec58abb9d1e5987bf8f3fc1bc52e8cf96fa78
SHA256: 795e8b52773591f8fec0f6a2038cfa287639f7bcb9333f4815c3b084b9733d22
CRC32: dc98fc69
NI官方下载和百度网盘下载地址：
NI-RFmx Demod/Analog Modulation/Digital Modulation 19.0 Full Win32/64Eng NI-RFmx解调/模拟调制/数字调制19.0完整版
http://pcmv.cn/thread-27967-1-1.html?fromuid=9
(出处: 机器视觉论坛)
RFmx Demod 19.0 Readme
June 2019
This file contains important information about RFmx Demod, including installation instructions, new features, bugs fixes, and known issues.
Overview
New Features
Supported Hardware
System Requirements
Supported Operating Systems
Application Software Support
Installation Instructions
Installed Software
File Locations
Executable
Finding Examples
Accessing the Documentation
Product Security and Critical Updates
Behavior Changes
Bug Fixes
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
RFmx Demod Drops Support for Windows 7 (64-Bit) and Windows Server 2008 R2 in 2021
Legal Information
Overview
RFmx Demod provides a highly optimized RF measurement experience. Use RFmx Demod to perform demodulation measurements on analog and digital modulation signal formats, including QAM and ASK.
New Features
RFmx Demod 19.0 includes the following new features:
Support for LabVIEW 2019 (32-bit and 64-bit)
Support for De-embedding S-Parameter External Attenuation Tables
Addition of Reference Level Headroom property
Support for PXIe-5830 (EAP) and PXIe-5831 (EAP)
RFmx Demod 3.0 includes the following new features:
RFmx Demod 2.5 includes the following new features:
Addition of APIs to perform self-calibration and partial self-calibration
Addition of RFmx Debug Configuration Utility to configure debug settings
Support for LabVIEW 2018 (32-bit and 64-bit)
Support for querying configuration attributes without calling RFmxDemod Commit API
Supported Hardware
The following hardware products are supported in all operating systems listed in the Supported Operating Systems section.
Vector Signal Analyzers
PXIe-5663
PXIe-5663E
PXIe-5665
PXIe-5668
PXIe-5668 with PXIe-5698
Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help.
Vector Signal Transceivers
PXIe-5644
PXIe-5645
PXIe-5646
PXIe-5840
PXIe-5820
PXIe-5830 (EAP)
PXIe-5831 (EAP)
Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.
System Requirements
RFmx Demod has the following requirements:
Processor—1 GHz 64-bit (x64) processor
4 GB RAM*
A screen resolution of 1,024 x 768
Windows 10/8.1/7, with all available critical updates and service packs
*Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.
Supported Operating Systems
RFmx Demod 19.0 supports the following 64-bit operating systems:
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1 and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
Note In 2019, RFmx Demod dropped support for all 32-bit Windows operating systems. RFmx Demod will not install or run on an unsupported OS. Refer to RFmx Demod Drops Support for Windows 7 (64-Bit) and Windows Server 2008 R2 in 2021 for information about future OS support.
Application Software Support
RFmx Demod supports the following application software versions, including service packs. You should install application software, such as LabVIEW, LabWindows/CVI or Microsoft Visual Studio®, before installing RFmx Demod. To add support for application software installed after installing RFmx Demod modify your RFmx Demod installation or launch the RFmx Demod installer again. If you are not using NI application software, refer to Microsoft Visual Studio Support.
[tr][/tr][/table][table]
| Application Software | Versions Supported by RFmx Demod |
| LabVIEW | 2016, 2017, 2018 SP1 f4 patch, or 2019 |
| LabWindows™/CVI™ | 2013 SP2 or later |
Other Required Software
NI-RFSA 14.1 or later
NI-RFSG 14.0.1 or later
Microsoft Visual Studio Support
If you are using the RFmx Demod .NET Class Library, .NET Framework 4.0 (minimum) is required. The RFmx Demod .NET Class Library can be used with Visual C# or Visual Basic .NET in any Visual Studio version that can target .NET Framework 4.0.
To use the .NET API, you must install the .NET class libraries or the .NET wrapper in addition to the NI device driver. For information about versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to National Instruments .NET Driver Support.
Installation Instructions
NI installs RFmx Demod using NI Package Manager. If you do not already have NI software installed, RFmx Demod installs NI Package Manager to handle the installation of your NI software. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
Installed SoftwareInstalled Software
<MSTUDIOVS2010DIR> is an alias for the following National Instruments file folder location:
<NIDir> is an alias for the following National Instruments file folder location:
<SYSDIR> is an alias for the following file folder location:
File Locations
| Item | Installed Location |
| Version Compatibility Checker | <NIDir>RFmx
iRFmxCompatibility_Checker.exe |
| Debug Configuration Utility | <NIDir>RFmx
iRFmxDebugConfigurationUtility.exe |
| DLLs | <SYSDIR> |
| Header files | <NIDir>SharedExternalCompilerSupportCinclude |
| Import Library files (64-bit) | |
| C, .NET |
| Examples | <NIDocDir>NI-RFmxDemodExamples |
| LabVIEW |
| Examples | <NIDir>LabVIEW <version>examplesRFmxDemod |
| .NET Class Libraries |
| Assemblies | <MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.DemodMX.Fx40.dll
<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.InstrMX.Fx40.dll
<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.Common.dll |
Executable
Select Start»All Programs»National Instruments»RFmx Demod»RFmx Demod Measurement Interactive Panel to launch the RFmx Demod Measurement Interactive Panel.
Finding Examples
Select Help»Find Examples from LabVIEW or LabWindows/CVI to launch the NI Example Finder and navigate to Hardware Input and Output»Modular Instruments»NI-RFmx»Demod. You can also select the Search tab to search all installed examples by keyword.
You can access all the installed RFmx Demod examples at Start»All Programs»National Instruments»RFmx Demod»RFmx Demod Examples.
Accessing the Documentation
Documentation for RFmx Demod is located at Start»All Programs»National Instruments»RFmx Demod»RFmx Demod Documentation. The documentation set is composed of the following documents.
| Document | Format | Description |
| RFmx Demod Help | HTML/Windows Help | Contains primary help content for RFmx Demod. This help file is an HTML version of a traditional user manual that includes the following information:An introduction to RFmx Demod How to get started with application development A complete reference for all RFmx Demod programming functions and VIs
|
| RFmx Demod 19.0 Readme | HTML (this document) | Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices. |
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.
Accessing VIs
RFmx Demod palette VIs are available from the Functions»Measurement I/O»NI-RFmx»Demod palette.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
Behavior Changes
The following items are the behavior changes in RFmx Demod 19.0 from RFmx Demod 3.0.
The following items are the behavior changes in RFmx Demod 2.3.1 from RFmx Demod 2.3.
Changed the default value of the IQ Power Edge Source property to ""(empty string)
The alias 'default@Demod' for the default signal name is accepted as a valid signal name in a selector string parameter
LabVIEW built binaries using RFmx versions older than 2.2 are no longer supported
Bug Fixes
The following items are the IDs and titles of a subset of issues fixed in RFmx Demod. This is not an exhaustive list of issues fixed in the current version of the RFmx Demod. If you have a CAR ID, you can search this list to validate that the issue has been fixed.
The following items are changes in RFmx Demod 3.0 from RFmx Demod 2.5
| ID | Fixed Issue |
| 706047 | Fixed an occasional crash which might occur on closing LabVIEW 2017 IDE or LabVIEW 2017 built applications that use RFmx. |
| 719203 | Fixed an issue where a timeout error was thrown when the digital trigger was configured when Using breakpoints in C/C++/.NET application was selected in the PXIe-5840. |
The following items are changes in RFmx Demod 2.5 from RFmx Demod 2.4.
| ID | Fixed Issue |
| 644169 | Fixed an issue to enhance the CFO estimation for QAM. |
| 699425 | Fixed an issue to align the Quadrature skew definition with RFmx Waveform Creator. |
The following items are changes in RFmx Demod 2.4 from RFmx Demod 2.3.1.
| ID | Fixed Issue |
| 656549 | Fixed an issue with EVM measurements resulted from the IQ imbalance application to half-sine filtered OQPSK signal. |
| 656458 | Fixed an issue with impairments estimation of OQPSK modulated signal. |
| 640495 | Fixed an issue where switching between measurements from an RFmx cellular personality to Demod resulted in higher EVM on 5668R. |
| 641411 | Fixed an issue with running DDEM measurement with Auto Level. |
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
For more information about silent installations of individual NI products, refer to Customize and Automate Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to Customize and Automate Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to Determine Type and Version of My National Instruments Installer.
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
Using NI Software with Microsoft Windows 8.1
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
RFmx Demod Drops Support for Windows 7 (64-Bit) and Windows Server 2008 R2 in 2021
RFmx Demod will drop support for Windows 7 (64-bit) and Windows Server 2008 R2 starting in 2021. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.
For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
| Product | Info Code |
| LabVIEW | lifecycle |
| LabWindows/CVI | cvi_lifecycle |
| Measurement Studio | mstudiolifecycle |
| TestStand | tslcp |
| DIAdem | ddlcp |
| SignalExpress | selcp |
| VeriStand | nivslifecycle |
Legal Information
Copyright
© 2014–2019 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
374855L-01
