Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI-RFmx Demod/Analog Modulation/Digital Modulation 2.3.0 Full Win32/64Eng NI-RFmx解调/模拟调制/数字调制2.3.0完整版
RFmx模拟调制
RFmx模拟调制为测试应用提供模拟调制信号的生成和分析。
RFmx Analog Modulation是运行在RFmx解调器内的应用软件，它与RFmx Analog Modulation一起安装。该软件可扩展NI RF仪器对于模拟调制信号生成和分析的能力。您可以使用该软件，通过对频率/相位偏移、模拟调制深度、频率/相位偏差等的测量，分析AM、FM、PM和FM的立体声信号。此外，您可以通过应用去加重和音频滤波器来分析解调后的信号波形、频谱和失真。您可以通过交互式软件前面板进行和调试测量，利用随附的RFmx Waveform Creator创建和回放开放的、未锁定的波形，并利用性能优化的API加快自动测试。
2.3x86/64
文件大小: 684584920 字节 (652.87 MB)
修改日期: 2017-05-11 20:05
MD5: bbe960989637c92ac66a60f1518e0af3
SHA1: 1a5126147373902caf9ec327ebf5e560ddaf008a
SHA256: af2fb8b829fb1cca2b6eeace5b04a0130cbd7cb676c42939a80936a03835d762
CRC32: 1c85a691
NI官方下载和百度网盘下载地址：
NI-RFmx Demod/Analog Modulation/Digital Modulation 2.3.0 Full Win32/64Eng NI-RFmx解调/模拟调制/数字调制2.3.0完整版
http://pcmv.cn/thread-27952-1-1.html?fromuid=9
(出处: 机器视觉论坛)
NI-RFmx Demod 2.3 Readme
May 2017
This file contains important information about NI-RFmx Demod and is organized into the following sections:
New Features
Installation Instructions
Supported Hardware
System Requirements
Installed Software, Documentation, and Examples
Executable
Documentation
Accessing VIs and Functions
Finding Examples
NI Software Support for Microsoft Windows 7, Windows Vista, Windows XP, and Windows Server 2003
Product Security and Critical Updates
Uninstalling/Modifying NI-RFmx Demod
Behavior Changes
Known Issues
Bug Fixes
Increasing Available Memory For Your Application
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
Legal Information
New Features
NI-RFmx Demod 2.3 includes the following new features:
Addition of functions to query signal configuration names and result names
Support for LabVIEW 2017 (32-bit and 64-bit)
Support for frequency-dependent external attenuation tables
Support for monitoring API calls in the NI IO Trace
Support for Burst Analysis in DDemod
Support for Linearized GMSK Pulse Shaping Filter and 3*Pi/8 - 8PSK modulation for EDGE DDemod
Support for enabling or disabling IQ offset correction in EVM measurement
NI-RFmx Demod 2.2 includes the following new features:
Support for LabVIEW 2016 (32-bit and 64-bit)
Support for LO leakage avoidance when using vector signal transciever as the analyzer
Support for Limited Configuration Change when sweeping frequency and reference level in test application
Addition of offset constellation trace for OQPSK modulation
Addition of advanced instrument attributes to the measurement interactive panel
NI-RFmx Demod 2.1 f4 includes the following bug fixes and updates:
Fixed an issue where NI-RFmx was crashing when the memory usage in a process increased beyond 2 GB.
Recommended IQ Pre Trigger Time property now returns a positive number instead of a negative number. This property is applicable when NI-RFmx is used in the Analysis-Only mode.
For the Analysis-Only mode, user needs to adjust the t0 value of the I/Q waveforms according to pre-trigger samples present in the waveform before passing the waveform to the Analyze (IQ) function.
Installation Instructions
Caution Before you install NI-RFmx Demod 2.3, ensure that you have uninstalled all related NI-RFmx 1.0 products.
Caution If you are using only RFmx LabVIEW Runtime products, NI recommends uninstalling all the RFmx Runtime products before installing a newer version of RFmx Runtime products.
NI-RFmx drivers require that all the installed drivers have the same version for proper functionality because the NI-RFmx drivers use shared components that need to use the same version across all drivers. If driver incompatibilities exist, they are reported through a dialog box after installation. You can also use the Version Compatibility Checker utility to manually check for version incompatibilities. Refer to the Installed Software, Documentation, and Examples section for more information about the installed location of the Version Compatibility Checker utility.
Note Some of the installed NI-RFmx Demod.NET examples require the NI-RFSG .NET Class Library. For these examples to build and run successfully, install NI-RFSG .NET Class Library before or after installing NI-RFmx Demod.
Supported HardwareVector Signal Analyzers
Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help.
Vector Signal Transceivers
NI PXIe-5644R
NI PXIe-5645R
NI PXIe-5646R
NI PXIe-5840
Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.
System RequirementsSupported Operating Systems
NI-RFmx Demod 2.3 supports the following operating systems:
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
Note NI-RFmx Demod 2.3 does not support Windows Server non-R2 editions.
NI recommends that you have the most recent service pack for your operating system installed.
Minimum Requirements
Processor—Intel i3 or equivalent
RAM—2 GB*
Microsoft Internet Explorer 5.5 or later
A screen resolution of 1300 x 700 with 256 colors
Windows 10/8.1/7, with all available critical updates and service packs
Microsoft .NET Framework 4.0**
*Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.
**Microsoft .NET Framework 4.0 is required for .NET support only.
Recommended System
Processor—Intel i5 or equivalent
RAM—4 GB*
Microsoft Internet Explorer 5.5 or later
A screen resolution of 1300 x 700
Windows 10/8.1/7, with all available critical updates and service packs
Microsoft .NET Framework 4.0**
*Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.
**Microsoft .NET Framework 4.0 is required for .NET support only.
Application Development Environments (ADEs)
Note You should install ADEs, such as NI LabVIEW, NI LabWindows/CVI, or Microsoft Visual Studio®, before installing NI-RFmx Demod. To add support for ADEs installed after installing NI-RFmx Demod, modify your NI-RFmx Demod installation or launch the NI-RFmx Demod installer again.
NI LabVIEW 2014 SP1 f5 (32-bit) patch, 2014 SP1 f6 (64-bit) patch, 2015 SP1 f5 patch, 2016, or 2017
NI LabWindows/CVI 2010 or later
Microsoft Visual Studio 2010 SP1 or later
Note NI-RFmx Demod does not operate correctly without the service packs and patches previously mentioned installed.
Other Required Software
NI-RFSA 14.1 or later
NI-RFSG 14.0.1 or later
Installed Software, Documentation, and ExamplesInstalled Software
<MSTUDIOVS2010DIR> is an alias for the following National Instruments file folder location:
<NIDir> is an alias for the following National Instruments file folder location:
<NIDocDir> is an alias for the following National Instruments file folder location: UsersPublicPublic DocumentsNational Instruments
<SYSDIR> is an alias for the following file folder location:
File Locations
| Item | Installed Location |
| Version Compatibility Checker | <NIDir>RFmx
iRFmxCompatibility_Checker.exe |
| DLLs | <SYSDIR> |
| Function Panels | <NIDir>SharedCVIBin
iRFmxDemod.lfp <NIDir>SharedCVIBin
iRFmxInstr.lfp |
| Header files | <NIDir>SharedExternalCompilerSupportCinclude |
| Import Library files (32-bit) | <NIDir>SharedExternalCompilerSupportCinclude |
| Import Library files (64-bit) | |
| C, .NET, NI TestStand |
| Examples | <NIDocDir>RFmxDemodExamples |
| LabWindows/CVI |
| Examples | <NIDocDir>CVIsamplesRFmxDemod |
| LabVIEW |
| Examples | <NIDir>LabVIEW <version>examplesRFmxDemod |
| .NET Class Libraries |
| Assemblies | <MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.DemodMX.Fx40.dll
<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.InstrMX.Fx40.dll
<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.Common.dll |
Executable
Select Start»All Programs»National Instruments»NI-RFmx Demod»NI-RFmx Demod Measurement Interactive Panel to launch the NI-RFmx Demod Measurement Interactive Panel.
Documentation
Documentation for NI-RFmx Demod is located at Start»All Programs»National Instruments»NI-RFmx Demod»NI-RFmx Demod Documentation. The documentation set is composed of the following documents.
| Document | Format | Description |
| NI-RFmx Demod Help | HTML/Windows Help | Information about NI-RFmx Demod. This help file is an HTML version of a traditional user manual that includes the following information:An introduction to NI-RFmx Demod How to get started with application development A complete reference for all NI-RFmx Demod programming functions and VIs
|
| NI-RFmx Demod 2.3 Readme | HTML (this document) | Information about supported hardware and operating systems, new features, fixed issues, and legal notices. |
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.
Accessing VIs and Functions
NI-RFmx Demod palette VIs are available from the Functions»Measurement I/O»NI-RFmx palette.
NI-RFmx Demod functions are available in LabWindows/CVI from the Library»RFmx Demod Library menu.
Finding Examples
In LabVIEW, you can use the NI Example Finder to search or browse examples. NI-RFmx Demod examples are classified by keyword, so you can search for a particular device or measurement function. In LabVIEW, select Help»Find Examples to launch the NI Example Finder. The NI Example Finder offers two ways to access all installed LabVIEW example VIs (including NI–RFSG and Modulation Toolkit examples) and their descriptions:
Click the Browse tab to locate modulation examples by task at Hardware Input and Output»Modular Instruments»NI–RFmx» Demod or by directory structure at RFmx» Demod.
Click the Search tab to search all installed examples by keyword. For example, search for "Demod" to locate all NI-RFmx Demod examples.
The NI Example Finder is also available in LabWindows/CVI by selecting Help»Find Examples.
You can also access all the installed NI-RFmx Demod examples for LabVIEW and LabWindows/CVI at Start»All Programs»National Instruments»NI-RFmx Demod»NI-RFmx Demod Examples.
Refer to ni.com/examples for these examples and for more information.
NI-RFmx Demod 2.3 Drops Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003
With this release, NI-RFmx Demod drops support for Microsoft Windows 7 RTM (with no service pack), Windows Vista, Windows XP, and Windows Server 2003. NI-RFmx Demod 2.3 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI-RFmx Demod 2.3 to an unsupported OS. Additionally, after installing NI-RFmx Demod 2.3, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
Uninstalling/Modifying NI-RFmx Demod
For Windows 7, complete the following steps:
Launch the Control Panel by selecting Start»Control Panel.
Double-click Programs and Features.
Select National Instruments Software.
Click the Uninstall/Change button.
Select NI-RFmx Demod 2.3 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
For Windows 10/8.1, complete the following steps:
Right-click on the Start button.
Select Control Panel.
Select Programs» Programs and Features.
Select National Instruments Software.
Click the Uninstall button.
Select NI-RFmx Demod 2.3 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
As part of the NI-RFmx Demod 2.3 installation, the following software is installed. To completely remove the NI-RFmx Demod 2.2 installation from your system, you must also remove the following packages:
Caution Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.
Note Do not attempt to uninstall by manually deleting files.
Behavior Changes
The following item is a behavior change in NI-RFmx Demod 2.0 from NI-RFmx Demod 1.2.
Known Issues
You can access the software and documentation known issues list online. Refer to the NI-RFmx Demod 2.3 Known Issues at ni.com for an up-to-date list of known issues in NI-RFmx Demod 2.3.
Bug Fixes
The following items are changes in NI-RFmx Demod 2.3 from NI-RFmx Demod 2.2.
| ID | Fixed Issue |
| 631432 | Fixed an issue where incorrect values were returned on reading RF Attenuation and Mechanical Attenuation properties. |
The following items are changes in NI-RFmx Demod 2.2 from NI-RFmx Demod 2.1.
| ID | Fixed Issue |
| 533768 | Fixed an issue by renaming the FSK result, Mean RMS Deviation Error to Mean RMS FSK Error. |
The following items are changes in NI-RFmx Demod 2.1 from NI-RFmx Demod 2.0.
| ID | Fixed Issue |
| 554076 | Fixed an issue with the starting reference level used in auto level when preamp is enabled on NI PXIe-5668R. |
Increasing Available Memory For Your Application
When developing memory intensive applications, you may encounter memory limits as 32-bit Windows applications only utilize 2 GB of memory by default. To expand the amount of memory an application can utilize, you can configure the executable to be large address aware to gain access to up to 3 GB of memory on a 32-bit Windows operating system and up to 4 GB of memory on a 64-bit Windows operating system.
For more information, refer to Memory Limits for Windows and Windows Server Releases on the Microsoft website.
| Note LabVIEW 8.5 and later are large address aware. For more information, refer to How Much Memory can LabVIEW 32-bit or 64-bit Use?. |
In TestStand 2013 and later, the Large Address Aware flag is enabled by default for the TestStand Sequence Editor and TestStand User Interfaces. For more information, refer to Using the Large Address Aware Flag With TestStand Applications.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My NI Installer?.
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
Using NI Software with Microsoft Windows 8.1
When you install National Instruments software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
Legal Information
Copyright
© 2014–2017 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
374847F-01
