下载中心

NI-SWITCH 4.6.1 Win32/64Eng/Jpn NI开关产品驱动程序4.6.1下载

文章来源:石鑫华视觉网时间:2022-06-13 15:40:25 点击:233

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI-SWITCH 4.6.1 Win32/64Eng/Jpn NI开关产品驱动程序4.6.1下载

NI-SWITCH
NI-SWITCH为使用NI开关产品的客户提供支持。
NI-SWITCH是用于控制和配置NI开关的NI仪器驱动程序。NI-SWITCH一种兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供了一系列操作和属性，可以执行波形或信号发生器的功能，并包含了交互式软件前面板和示例。

Win32/64Eng/Jpn
4.6.1
文件大小: 2033291093 字节 (1.89 GB)
修改日期: 2013-03-14 02:31
MD5: d396fc10036277540f2f9b5ce9f2c27d（官方正确）
SHA1: 69df0f00fde5e8edeca0780d48b9a304b4e3b961
SHA256: 3255f7bec562fc109fa4d40e376f72ebc18add5b6f96d486e8b0a1737957099e
CRC32: 848fa4ed

百度网盘与NI官方下载地址：

http://pcmv.cn/thread-27401-1-1.html?fromuid=9

(出处: 机器视觉论坛)

NI-SWITCH Readme File

Version 4.6.1

Thank you for using NI-SWITCH. This file contains important information about NI-SWITCH and is organized into the following sections:

New Features
Supported Hardware
System Requirements
Installed File Names and Locations

Software
Documentation
Examples

Updates and Notifications
Uninstalling/Modifying NI-SWITCH
Obsolete VIs and Functions
Known Issues
Bug Fixes
Automating the Installation of NI Products
How to Use NI Sofware with Microsoft Windows 8
Important Information

New Features

NI-SWITCH 4.6.1 includes the following new features:

Support for the NI PXI/PXIe-2540 and NI PXI/PXIe-2541 modules.
Improved the schematic display in Switch Soft Front Panel for some RF multiplexer topologies.

NI-SWITCH 4.6 adds support for the NI PXI-2520, NI PXI-2521, NI PXI-2522, NI PXI-2523, and NI PXIe-2790 modules.

NI-SWITCH 4.5.5 adds support for LabVIEW 2012 (32-bit) and LabVIEW 2012 (64-bit).

NI-SWITCH 4.5 adds support for the NI 2833, NI 2834, NI PXI/PXIe-2532B, NI PXI-2720, NI PXI-2722, NI PXIe-2725, NI PXIe-2727, NI PXI-2796, NI PXI-2797, NI PXI-2798, and NI PXI-2799 modules.

NI-SWITCH 4.4 includes the following new features:

Support for the NI 2812, NI 2813, NI 2814, NI 2817, and NI PXI/PXIe-2543 modules.
Support for one new NI PXI/PXIe-2532 topology and the NI TB-2646 terminal block.

NI-SWITCH 4.3.5 adds support for LabVIEW 2011 (32-bit) and LabVIEW 2011 (64-bit).

NI-SWITCH 4.3 includes the following new features:

Support for the NI PXI-2530B and NI PXI-2571 modules.
Dynamic power budget for NI SwitchBlock cards and carriers.

Supported Hardware

NI-SWITCH 4.6.1 and later supports the following National Instruments switch products:

NI 2810
NI 2811
NI 2812
NI 2813
NI 2814
NI 2815
NI 2816
NI 2817
NI 2833
NI 2834
NI PXI-2501
NI PXI-2503
NI PXI-2510
NI PXI/PXIe-2512
NI PXI/PXIe-2514
NI PXI/PXIe-2515
NI PXI-2520
NI PXI-2521
NI PXI-2522
NI PXI-2523
NI PXI/PXIe-2527
NI PXI/PXIe-2529
NI PXI-2530
NI PXI-2530B
NI PXI/PXIe-2531
NI PXI/PXIe-2532
NI PXI/PXIe-2532B
NI PXI-2533
NI PXI-2534
NI PXI-2535
NI PXI-2536
NI PXI/PXIe-2540
NI PXI/PXIe-2541
NI PXI/PXIe-2543
NI PXI-2545
NI PXI-2546
NI PXI-2547
NI PXI-2548
NI PXI-2549
NI PXI-2554
NI PXI-2555
NI PXI-2556
NI PXI-2557
NI PXI-2558
NI PXI-2559
NI PXI-2564
NI PXI-2565
NI PXI-2566
NI PXI-2567
NI PXI-2568
NI PXI/PXIe-2569
NI PXI-2570
NI PXI-2571
NI PXI/PXIe-2575
NI PXI-2576
NI PXI-2584
NI PXI-2585
NI PXI-2586
NI PXI-2590
NI PXI-2591
NI PXI/PXIe-2593
NI PXI-2594
NI PXI-2595
NI PXI-2596
NI PXI-2597
NI PXI-2598
NI PXI-2599
NI PXI-2720
NI PXI-2722
NI PXIe-2725
NI PXIe-2727
NI PXIe-2790
NI PXI-2796
NI PXI-2797
NI PXI-2798
NI PXI-2799
NI PXI-2800
NI SCXI-1127
NI SCXI-1128
NI SCXI-1129
NI SCXI-1130
NI SCXI-1160
NI SCXI-1161
NI SCXI-1163R
NI SCXI-1166
NI SCXI-1167
NI SCXI-1169
NI SCXI-1175
NI SCXI-1190
NI SCXI-1191
NI SCXI-1192
NI SCXI-1193
NI SCXI-1194
NI SCXI-1195

NOTES: NI-SWITCH does not support legacy resource descriptors (SCXI:: and PXI::) under Windows 8/7/Vista.

NI-SWITCH supports the NI USB-1359 under Windows XP and the 32-bit version of Windows 8/7/Vista. NI-SWITCH does not support the NI USB-1359 under the 64-bit version of Windows 8/7/Vista.

If you are using a cabled PXI chassis, notice that MXI-4 is supported under Windows 8/7/Vista/XP, but MXI-3 is supported under only Windows XP.

System RequirementsSupported Operating Systems

NI-SWITCH 4.6.1 and later and NI-DAQmx 9.6.1 and later support the following operating systems:

Windows 8 (32-bit and 64-bit)
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 3 (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)

NOTE: NI-SWITCH 4.6.1 and later and NI-DAQmx 9.6.1 and later do not support Windows Server non-R2 editions.

It is recommended that you have the most recent service pack for your operating system installed. Windows 2000 users must use NI-SWITCH 4.0.1 or earlier.

Supported Real-Time Operating Environments

NI-SWITCH 4.6.1 and later and NI-DAQmx 9.6.1 and later support the following real-time operating environments:

LabVIEW Real-Time Module
LabWindows/CVI Real-Time Module

Minimum System Requirements

Processor—Pentium III/Celeron 600 MHz or equivalent
RAM—

Windows XP SP 3: 128 MB
Windows 8/7/Vista: 512 MB

Microsoft Internet Explorer 5.5 or later
A screen resolution of 800 x 600 with 256 colors
Windows 8/7/Vista/XP, with all available critical updates and service packs

Recommended System

Processor—Pentium 4 or later
RAM—

Windows XP: 256 MB
Windows 8/7/Vista: 1 GB

A screen resolution of 1,024 x 768
Windows 8/7/Vista/XP, with all available critical updates and service packs
If you are running your application on an RT target, 64 MB of memory or more is recommended.

Application Development Environments (ADEs)

LabVIEW 2009 SP1 (32-bit), 2009 SP1 (64-bit), 2010 SP1 (32-bit), 2010 SP1 (64-bit), 2011 SP1 (32-bit), 2011 SP1 (64-bit), 2012 (32-bit), or 2012 (64-bit)
LabVIEW Real-Time Module 2009 SP1, 2010 SP1, 2011 SP1, or 2012
LabWindows™/CVI™ 9.0.1 or later
LabWindows/CVI Real-Time Module 2009 or later
Microsoft Visual C++ (MSVC) 6.0 or later
If you are running your application on an RT target, 128 MB of memory or more is required.

NOTE: You should install Application Development Environments, such as NI LabVIEW, NI LabWindows/CVI or Microsoft Visual Studio®, before installing NI-SWITCH. To add support for Application Development Environments installed after installing NI-SWITCH, modify your NI-SWITCH installation or launch the NI-SWITCH installer again.

Installed File Names and LocationsSoftware

<NIDocDir> is an alias for the following National Instruments file folder location:

Windows XP: Documents and SettingsAll UsersShared DocumentsNational Instruments
Windows 8/7/Vista: UsersPublicDocumentsNational Instruments

<IVIROOTDIR32> is an alias for the following National Instruments file folder location:

Windows 8 (32-bit)/7 (32-bit)/Vista (32-bit)/XP: Program FilesIVI
Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit): Program Files (x86)IVI
Windows 8 (32-bit)/7 (32-bit)/Vista (32-bit)/XP: Program FilesIVI FoundationIVI
Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit): Program Files (x86)IVI FoundationIVI
NOTES: $(IVIROOTDIR32) is configured as an environment variable on the target system.

If you upgraded an installation of IVI, your files may be located in the following location:

<IVIROOTDIR64> is an alias for the following National Instruments file folder location:

Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit): Program FilesIVI FoundationIVI
NOTE: $(IVIROOTDIR64) is configured as an environment variable on the target system.

File Locations

Item	Installed Location on Windows 8 (32-bit)/7 (32-bit)/Vista (32-bit)/XP
NI-SWITCH	<IVIROOTDIR32>Drivers iSwitch
NI-SWITCH Function Panel	<IVIROOTDIR32>Drivers iSwitch iSwitch.fp
NI-SWITCH Examples	<NIDocDir> iSwitchExamples
NI-SWITCH Header files	<IVIROOTDIR32>Include
NI-SWITCH Import Library files (32-bit)	<IVIROOTDIR32>Lib
NI-SWITCH Import Library files (64-bit)	<IVIROOTDIR32>Lib_x64
NI-SWITCH DLL (32-bit)	<IVIROOTDIR32>Bin

Additional File Locations for Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit)

Item	Installed Location on Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit)
NI-SWITCH Function Panel	<IVIROOTDIR64>Drivers iSwitch iSwitch.fp
NI-SWITCH Header files	<IVIROOTDIR64>Include
NI-SWITCH Import Library files (64-bit)	<IVIROOTDIR64>Lib_x64
NI-SWITCH DLL (64-bit)	<IVIROOTDIR64>Bin

Documentation

Documentation is available at Start»All Programs»National Instruments»NI-SWITCH»Documentation. The documentation set is composed of the following documents:

NI-SWITCH Readme
NI Switches Getting Started Guide—Printed and PDF format. Contains hardware and software installation, MAX configuration, and signal connection information.
NI Switches Help—HTML help format. Contains switching fundamentals, device specific information, programming information, tutorials, a LabVIEW VI reference, and LabWindows/CVI, C++, and Visual Basic function references.
NI Switch Specifications—Printed and PDF format. Lists specifications for each NI switch module.
NI Switch Accessory Installation Instructions (Optional)—Printed and PDF format. Contains NI switch module accessory installation information.
Maintain Forced-Air Cooling Note to Users—Printed format. Contains important cooling information for each NI switch.
Read Me First: Safety and Electromagnetic Compatibility—Printed format. Includes safety instructions and information about the radio-frequency interference characteristics of the hardware it accompanies.

Note To view the specifications, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.

Examples

Refer to Start»All Programs»National Instrument»NI-SWITCH»Examples for the examples for the supported, previously installed ADEs. The examples cover immediate operations, synchronous scanning, handshaking, and software triggering. A complete example list is available in the NI Switches Help.

Refer to the Installed File Names and Locations section for the installed locations of the example sets.

Updates and Notifications

National Instruments releases critical software updates after product release using the NI Update Service. Visit ni.com/info and enter updates to view a list of all currently available updates.

National Instruments provides notification of certain critical issues at install time. Visit ni.com/info and enter notifications to view a list of current product notifications.

Uninstalling/Modifying NI-SWITCH

For Windows XP, complete the following steps:

Launch the Control Panel by selecting Start»Control Panel.
Double-click Add/Remove Programs.
Select National Instruments Software.
Click Change/Remove.
Select NI-SWITCH 4.x from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.

For Windows 7/Vista, complete the following steps:

Launch the Control Panel by selecting Start»Control Panel.
Double-click Programs and Features.
Select National Instruments Software.
Click the Uninstall/Change button.
Select NI-SWITCH 4.x from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.

For Windows 8, complete the following steps:

Right-click on the Start screen.
Select All apps, and launch the Control Panel.
Select Programs» Programs and Features.
Select National Instruments Software.
Click the Uninstall button.
Select NI-SWITCH 4.x from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.

As part of the NI-SWITCH installation, the following software is installed. To completely remove the NI-SWITCH installation from your system, you must also remove all of the following packages:

NI IVI Compliance Package 4.5
NI Measurement & Automation Explorer 5.3
NI-DAQmx 9.6.1
NI-VISA 5.0
NI Spy 2.7.2

Caution Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.

Obsolete VIs and Functions

niSwitch Can Connect Channels? VI*
niSwitch Connect and Wait VI/function
niSwitch Control a Single Switch VI/function
niSwitch Disconnect and Wait VI/function
niSwitch Error-Query VI/function
niSwitch Get Error Info VI/function
niSwitch Is Debounced? VI*
niSwitch Is Scanning? VI*
niSwitch Query a Single Switch VI/function
niSwitch Read Calibration Data VI/function
niSwitch Scan VI/function
niSwitch Scanning Acquisition VI/function
niSwitch Write Calibration Data VI/function

* The niSwitch Can Connect Channels?, niSwitch Is Debounced?, and niSwitch Is Scanning? VIs were replaced by identical VIs without question marks in the name.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI-SWITCH 4.6 and 4.6.1 Known Issues web page on the National Instruments web site for an up-to-date list of known issues in NI-SWITCH 4.6 and 4.6.1.

Bug Fixes

The following items are changes in NI-SWITCH 4.6.1 from NI-SWITCH 4.6.

ID	Fixed Issue
372998	Fixed an issue where the NI 2833/2834 power consumption was not accounted for in the carrier power budget.
373015	Removed hyphens from the SwitchBlock model strings in the NISWITCH_SUPPORTED_INSTRUMENT_MODELS constant.
373073	Fixed an issue where the default channel state of the NI PXIe-2790 did not represent the hardware state correctly.

The following items are changes in NI-SWITCH 4.5 from NI-SWITCH 4.4.

ID	Fixed Issue
328251	Fixed an issue where the NI PXI-2571 did not honor user-defined settling times.

The following items are changes in NI-SWITCH 4.4 from NI-SWITCH 4.3.

ID	Fixed Issue
256580	Improved Windows 7 performance.

The following items are changes in NI-SWITCH 4.1 from NI-SWITCH 4.0.2.

ID	Fixed Issue
209501	Fixed an issue that disabled legacy scanning of multiple modules with NI-SWITCH.

The following items are changes in NI-SWITCH 4.0.1 from NI-SWITCH 4.0.

ID	Fixed Issue
181045	Fixed power budget issue for the PXI/PXIe-2515.
181067	Fixed an issue where calling Device Reset on certain PXI/PXIe devices (NI-PXI/PXIe-2512/2514/2564/2585/2586) incorrectly updated relay count.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.

How to Use NI Software with Microsoft Windows 8

When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW and Measurement & Automation Explorer (MAX).

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:

Current Application	Icon Location	Pin to Action
Windows 8 Desktop	Desktop Taskbar	Right-click application and select Pin to Taskbar
Windows 8 Desktop	Start screen	Right-click application and select Pin to Start
Windows 8 Start screen	Desktop Taskbar	Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.

Important Information

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFlegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

Trademarks

CVI, LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

NOTES:	$(IVIROOTDIR32) is configured as an environment variable on the target system.
	If you upgraded an installation of IVI, your files may be located in the following location:

下载中心

NI-SWITCH 4.6.1 Win32/64Eng/Jpn NI开关产品驱动程序4.6.1下载