石鑫华视觉
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI-SWITCH 3.5 Win32/64Eng NI开关产品驱动程序3.5下载
NI-SWITCH
NI-SWITCH为使用NI开关产品的客户提供支持。
NI-SWITCH是用于控制和配置NI开关的NI仪器驱动程序。NI-SWITCH一种兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供了一系列操作和属性，可以执行波形或信号发生器的功能，并包含了交互式软件前面板和示例。
Win32/64Eng
3.5
文件大小: 714810958 字节 (681.70 MB)
修改日期: 2010-04-25 03:24
MD5: d6e900f635758687e5ac7e24b0f068a9（官方正确）
SHA1: dd6a2e63cd7331e2fc8e89c7ece28f39c51b9314
SHA256: 29b272a555194711a701c9dc5898a4d472d13ab08b52e5ff61082a823bb464b7
CRC32: 07590739
百度网盘与NI官方下载地址：
NI-SWITCH 3.5 Win32/64Eng NI开关产品驱动程序3.5下载
http://pcmv.cn/thread-27387-1-1.html?fromuid=9
(出处: 机器视觉论坛)
NI-SWITCH Readme File
New Features in Version 3.5
Supported Hardware
System Requirements
Installed File Names and Locations
Software
Documentation
Examples
Uninstalling/Modifying NI-SWITCH
Obsolete VIs and Functions
Known Issues
Changes by Release
New Features in Version 3.5
Support for Windows Vista. For more information about Microsoft Windows Vista and NI products, refer to ni.com/vista.
Supported Hardware
NI PXI-2501
NI PXI-2503
NI PXI-2527
NI PXI-2529
NI PXI-2530
NI PXI-2532
NI PXI-2545
NI PXI-2546
NI PXI-2547
NI PXI-2548
NI PXI-2549
NI PXI-2554
NI PXI-2555
NI PXI-2556
NI PXI-2557
NI PXI-2558
NI PXI-2559
NI PXI-2564
NI PXI-2565
NI PXI-2566
NI PXI-2567
NI PXI-2568
NI PXI-2569
NI PXI-2570
NI PXI-2575
NI PXI-2576
NI PXI-2584
NI PXI-2585
NI PXI-2586
NI PXI-2590
NI PXI-2591
NI PXI-2593
NI PXI-2594
NI PXI-2595
NI PXI-2596
NI PXI-2597
NI PXI-2598
NI PXI-2599
NI SCXI-1127
NI SCXI-1128
NI SCXI-1129
NI SCXI-1130
NI SCXI-1160
NI SCXI-1161
NI SCXI-1163R
NI SCXI-1166
NI SCXI-1167
NI SCXI-1169
NI SCXI-1175
NI SCXI-1190
NI SCXI-1191
NI SCXI-1192
NI SCXI-1193
NI SCXI-1194
NI SCXI-1195
System Requirements
Minimum System
Processor—Pentium 200 MHz or equivalent
RAM—64 MB
A screen resolution of 800×600 with 256 colors
Windows XP/2000, with all available critical updates and service packs
Recommended System
Processor—Pentium III/Celeron 600 MHz or equivalent
RAM—256 MB
A screen resolution of 1024×768
Windows Vista/XP/2000, with all available critical updates and service packs
Application Development Environments (ADEs)
LabVIEW 7.1, 8.0, and 8.2
LabVIEW Real-Time Module 7.1.1, 8.0, and 8.2
LabWindows™/CVI™ 7.0, 8.0, and 8.1
Microsoft Visual C++ (MSVC) 6.0 or later
Microsoft Visual Basic 6.0
Installed File Names and LocationsSoftware
| Files | Installation Location on Windows XP/2000 and 32-Bit Version of Windows Vista | Installation Location on 64-Bit Version of Windows Vista |
| NI-SWITCH | Program FilesIVIDrivers iSwitch | Program Files (x86)IVIDrivers iSwitch |
| Documentation | Program FilesIVIDrivers iSwitchDocumentation | Program Files (x86)IVIDrivers iSwitchDocumentation |
| LabVIEW support | <LabVIEW>instr.lib iSwitch | <LabVIEW>instr.lib iSwitch |
| LabVIEW examples | Program FilesIVIDrivers iSwitchExamplesLabVIEW | Program Files (x86)IVIDrivers iSwitchExamplesLabVIEW |
| CVI support | Program FilesIVIDrivers iDCPower | Program Files (x86)IVIDrivers iDCPower |
| CVI examples | Program FilesIVIDrivers iSwitchExamplesCVI | Program Files (x86)IVIDrivers iSwitchExamplesCVI |
| C/C++ examples | Program FilesIVIDrivers iSwitchExamplesC | Program Files (x86)IVIDrivers iSwitchExamplesC |
| VB examples | Program FilesIVIDrivers iSwitchExamplesVB | Program Files (x86)IVIDrivers iSwitchExamplesVB |
| SWITCH Soft Front Panel | Program FilesIVIDrivers iSwitch | Program Files (x86)IVIDrivers iSwitch |
| LabVIEW Run-Time Engine 8.0 | Program FilesNational InstrumentsSharedLabVIEW Run-Time.1 | Program Files (x86)National InstrumentsSharedLabVIEW Run-Time.1 |
| NI-DAQmx 8.5 | Program FilesNational InstrumentsNI-DAQ | Program Files (x86)National InstrumentsNI-DAQ |
| IVI Compliance Package 3.0 | Program FilesNational InstrumentsIVI | Program Files (x86)National InstrumentsIVI |
| NI-VISA 4.1 | WINDOWSsystem32 | WINDOWSsysWOW64 |
| Measurement & Automation Explorer 4.2 | Program FilesNational InstrumentsMAX | Program Files (x86)National InstrumentsMAX |
Documentation
NI-SWITCH Readme File
Readme First: Safety and Radio-Frequency Interference
NI Switches Getting Started Guide
NI Switches Help
NI-SWITCH Instrument Driver Quick Reference Guide
Switch Soft Front Panel Help
NI Switch Specifications
NI Switch Accessory Installation Instructions (Optional)
Examples
Uninstalling/Modifying NI-SWITCH
Launch the Control Panel by selecting Start»Control Panel.
Double-click Add/Remove Programs.
Select National Instruments Software.
Click Change/Remove.
Select NI-SWITCH 3.x from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
Launch the Control Panel by selecting Start»Control Panel.
Double-click Programs and Features.
Select National Instruments Software.
Click the Uninstall/Change button.
Select NI-SWITCH 3.x from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
Obsolete VIs and Functions
Easy niSwitch CIN VI/function
Easy niSwitch Close VI/function
Easy niSwitch Open VI/function
niSwitch Connect and Wait VI/function
niSwitch Control a Single Switch VI/function
niSwitch Disconnect and Wait VI/function
niSwitch EasyIO Connect VI/function
niSwitch EasyIO Disconnect VI/function
niSwitch EasyIO Reset VI/function
niSwitch EasyIO Scan VI/function
niSwitch EasyIO Scanning Acquisition VI/function
niSwitch Query a Single Switch VI/function
niSwitch Scan VI/function
niSwitch Scanning Acquisition VI/function
niSwitch Error-Query VI/function
niSwitch Get Error Info VI/function
niSwitch Write Calibration Data VI/function
niSwitch Read Calibration Data VI/function
Known Issues
Reverting to NI-SWITCH 1.6 after installing NI-SWITCH 3.5
Various support files, such as .h and .lib files, are installed in Program FilesIVI and VXIpnp directories to support ADEs that only recognize the VXIpnp directory.
SCXI-1127 (Rev D and earlier) continuously drives the TTL1 trigger line on the SCXI backplane. This does not allow bus sharing of TTL1 with other SCXI modules. NI-SWITCH returns an error if an SCXI-1127 is in the chassis and if TTL1 is being used for scanning. If using the NI-DAQmx driver for your SCXI system, you get a resource reservation error if you try to perform a switching or signal conditioning operation that requires use of TTL1.
There are known DLL collision issues with the Microsoft Visual Basic debugger and a National Instruments device driver using Traditional NI-DAQ (Legacy). A support DLL used by NI-SWITCH fails to load if Visual Basic has already loaded another DLL into the same address space. To change the default address that is used to load the driver DLL, create the following registry key:
\HKEY_LOCAL_MACHINESOFTWARENational InstrumentsNI-PALCurrentVersionpalConfigMemory
sharedFixedAddress
where the value is a DWORD (0x44000000 generally works). For the change to take effect, you must close and restart all applications after adding the registry key.
NI-DMM 2.2
NI-DMM 2.2 updated the niSwitch DMM Switch Handshaking example for LabVIEW. If you have an earlier version of NI-DMM installed, the VI is inoperable. To use the example with NI-DMM 2.1.2 or earlier, delete the AUX Trig 1 case from the case structure connected to Sample Trigger Source in the niDMM Configure Multi Point VI.
NI-DMM 2.2 introduces a new enumerated value, AUX Trig 1.
When you run setup.exe to install the software from the CD, you are prompted to choose whether you want to always trust software from National Instruments. If you do not select this option, your installation may be interrupted by one or more Microsoft Windows security dialog boxes. However, if you run setup from the command line, you will not receive this prompt, and the installer will automatically install NI's Software Publisher Certificate to the your Windows Trusted Publisher Store. If you do not want to make this change to your Windows Trusted Publisher Store, do not choose this installation method.
NI recommends that you disable Windows power management modes, such as sleep, standby, and hibernate, when using this product. These modes terminate any NI-SWITCH operation in progress. Notice that in Windows Vista or on a laptop computer, the default power management settings are likely to enable sleep mode.
Changes by Release3.5 from 3.4
Support for Windows Vista
3.4 from 3.3.1
Support for the NI PXI-2545/2546/2547/2548/2549/2554/2555/2556/2557/2558/2559 switch modules
3.3.1 from 3.3
Fixed intermittent timeout errors on switch hardware after cold boot when using NI-SWITCH 3.1 or NI-SWITCH 3.3
3.3 from 3.1
New NI PXI-2584 example for interleaved scanning
NI PXI-2584 independent topology schematic in the Switch Soft Front Panel
New Behavior—For NI-DAQmx devices, initializing a session now closes any other existing sessions open to the same device in the same process. Calling niSwitch_init, niSwitch_InitWithTopology, or niSwitch_InitWithOptions therefore always results in the creation of a new session rather than returning an existing session. This new behavior does not apply to sessions to Traditional NI-DAQ (Legacy) devices and NI-VISA based devices.