Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI-SWITCH 2.2 Win32Eng NI开关产品驱动程序2.2下载

NI-SWITCH
NI-SWITCH为使用NI开关产品的客户提供支持。
NI-SWITCH是用于控制和配置NI开关的NI仪器驱动程序。NI-SWITCH一种兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供了一系列操作和属性，可以执行波形或信号发生器的功能，并包含了交互式软件前面板和示例。

Win32Eng
2.2
文件大小: 683926434 字节 (652.24 MB)
修改日期: 2007-08-23 08:01
MD5: 0a4242a0306834f6f0ba25d070d3ca14（官方正确）
SHA1: d0d33ed9ba39bc1e8bf4232ad6fb405dad2ef3ed
SHA256: b80d546b125b3753cd3650d2bf107ae3104ae18c5a5ffcb4196d6511366a882b
CRC32: 2f772dca

百度网盘与NI官方下载地址：

NI-SWITCH 2.2 Win32Eng NI开关产品驱动程序2.2下载

http://pcmv.cn/thread-27378-1-1.html?fromuid=9

(出处: 机器视觉论坛)

NI-SWITCH 2.1 Readme File

• New Features in NI-SWITCH 2.1

• Supported Switch Modules

• System Requirements

• Installed Software Components and Locations

• New Examples

• New Documentation

• New Functions/VIs

• Known Issues

• Obsolete/VIs Functions

• Uninstalling NI-SWITCH 2.1

• Changes/Fixes in NI-SWITCH 2.1 from 1.6
  

New Features in NI-SWITCH 2.1

• Support of SCXI-1167/1130 and PXI-2529/2530/2567 switch modules.

• Added terminated topologies for SCXI-1193 (quad 4x1 mux, dual 8x1 mux, 16x1 mux).

• Added terminated topologies for PXI-2593 (dual 4x1 mux, 8x1 mux).
  

Supported Switch Modules

• NI SCXI-1127

• NI SCXI-1128

• NI SCXI-1129

• NI SCXI-1130

• NI SCXI-1160

• NI SCXI-1161

• NI SCXI-1163R

• NI SCXI-1166

• NI SCXI-1167

• NI SCXI-1190

• NI SCXI-1191

• NI SCXI-1192

• NI SCXI-1193

• NI PXI-2501

• NI PXI-2503

• NI PXI-2529

• NI PXI-2530

• NI PXI-2565

• NI PXI-2566

• NI PXI-2567

• NI PXI-2590

• NI PXI-2591

• NI PXI-2593
  

System Requirements

• LabVIEW 7.0

• CVI 7.0
  

Installed Software Components and Locations

New Examples

New Documentation

NI-SWITCH 2.1 Readme FileNI Switches Getting Started Guide

NI Switches Help

NI-SWITCH Instrument Driver Quick Reference Guide

A Specifications document for each switch moduleTerminal Block installation guides.New Functions/VIs

niSwitch Initialize With TopologyniSwitch CommitniSwitch Route Scan Advanced OutputniSwitch Route Trigger InputniSwitch Get Relay CountniSwitch Get Relay NamesniSwitch Relay ControlniSwitch Get Relay Position

Known Issues

• If reverting back to NI-SWITCH 1.6 from NI-SWITCH 2.1, you must uninstall NI-SWITCH 2.1 and reinstall NI-SWITCH 1.6.

• Various support files such as .h and .lib files are installed inProgram FilesIVIandVXIpnpdirectories to support ADEs that only recognize theVXIpnpdirectory.

• SCXI-1127 (Rev D and earlier) continuously drives the TTL1 trigger line on the SCXI backplane. This does not allow bus sharing of TTL1 with other SCXI modules. NI-SWITCH will return an error if an SCXI-1127 is in the chassis and if TTL1 is being used for scanning. If using the NI-DAQmx driver for your SCXI system, you will get a resource reservation error if you try to perform a switching or signal conditioning operation that requires use of TTL1.

• There are known DLL collision issues with the Visual Basic debugger and a National Instruments device driver using Traditional NI-DAQ. A support DLL used by NI-SWITCH fails to load if Visual Basic has already loaded another DLL into the same address space. To change the default address that is used to load the driver DLL, create the following registry key:
  
  \HKEY_LOCAL_MACHINESOFTWARENational InstrumentsNI-PALCurrentVersionpalConfigMemorysharedFixedAddress
  
  where the value is a DWORD (0x44000000 generally works).
  
  For the change to take effect, all applications must be shut down and restarted after adding the registry key.

• The niSwitch DMM Switch Handshaking example for LabVIEW was updated with NI-DMM 2.2. If you have an earlier version of NI-DMM installed, the VI is inoperable.

  To use the example with NI-DMM 2.1.2 or earlier, delete the AUX Trig 1 case from the case structure connected to Sample Trigger Source in niDMM Configure Multi Point.vi.
  NI-DMM 2.2 introduces a new enumerated value, AUX Trig 1, not available in NI-DMM 2.1.2 or earlier.

  
  

Obsolete Functions/VIs

• Easy niSwitch CIN

• Easy niSwitch Close

• Easy niSwitch Open

• niSwitch Connect and Wait

• niSwitch Control a Single Switch

• niSwitch Disconnect and Wait

• niSwitch EasyIO Connect

• niSwitch EasyIO Disconnect

• niSwitch EasyIO Reset

• niSwitch EasyIO Scan

• niSwitch EasyIO Scanning Acquisition

• niSwitch Query a Single Switch

• niSwitch Scan

• niSwitch Scanning Acquisition

• niSwitch Error-Query

• niSwitch Get Error Info

• niSwitch Write Calibration Data

• niSwitch Read Calibration Data
  

Uninstalling NI-SWITCH 2.1

• Open the Control Panel from the Start»Settings»Control Panel Menu and select AddRemove Programs.

• Select National Instruments Software
  and click Change.

• Select NI-SWITCH 2.1 from the list provided and click Uninstall.
  

Changes/Fixes in NI-SWITCH 2.1 from 1.6

• New initialization, scanning, trigger routing, and relay control functions.

• Support of SCXI-1166/1193 and PXI-2566/2593 switch modules.

• Simplified example set.

• Improved switch configuration in MAX.

• Improved documentation set.

• SCXI switches and the PXI-2566/2593 can be configured under NI-DAQmx Devices in MAX.

• NI-SWITCH 2.1 requires installation of NI-DAQmx. Traditional DAQ is required for existing applications that use NI-SWITCH.
  

• 
  

• 上篇：NI-SWITCH 2.1 Win32Eng NI开关产品驱动程序2.1下载
• 下篇：NI-SWITCH 2.3.1 Win32Eng NI开关产品驱动程序2.3.1下载
• 标签：NI-SWITCH 2.2NI开关产品驱动程序2.2下载NI开关的NI仪器驱动程序可互换虚拟仪器IVI的仪器驱动程序波形或信号发生器NI开关产品驱动