Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活,以下链接可下载:
NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI-SWITCH 2.0 Win32Eng NI开关产品驱动程序2.0下载
NI-SWITCH
NI-SWITCH为使用NI开关产品的客户提供支持。
NI-SWITCH是用于控制和配置NI开关的NI仪器驱动程序。NI-SWITCH一种兼容可互换虚拟仪器(IVI)的仪器驱动程序,提供了一系列操作和属性,可以执行波形或信号发生器的功能,并包含了交互式软件前面板和示例。
Win32Eng
2.0
文件大小: 356774437 字节 (340.25 MB)
修改日期: 2008-08-27 13:24
MD5: 7a1fe5ebe9f148aaf63a91f39836779e(官方正确)
SHA1: f3f1126e3b14a5f6bfb70c56900e23c515f2eb9e
SHA256: aacfdbf785d5c97d55324487927feb010056dfc93b259f3723eed15ead5f2be8
CRC32: f9bd2c82
百度网盘与NI官方下载地址:
NI-SWITCH 2.0 Win32Eng NI开关产品驱动程序2.0下载
http://pcmv.cn/thread-27376-1-1.html?fromuid=9
(出处: 机器视觉论坛)
NI-SWITCH 2.0 Readme File
New Features in NI-SWITCH 2.0
Supported Switch Modules
System Requirements
Installed Software Components and Locations
New Examples
New Documentation
New Functions/VIs
Known Issues
Obsolete/VIs Functions
Uninstalling NI-SWITCH 2.0
Changes/Fixes in NI-SWITCH 2.0 from 1.6
New Features in NI-SWITCH 2.0
New initialization, scanning, trigger routing, and relay control functions.
Support of SCXI-1166/1193 and PXI-2566/2593 switch modules.
Simplified example set.
Improved switch configuration in MAX.
Improved documentation set.
Supported Switch Modules
NI SCXI-1127
NI SCXI-1128
NI SCXI-1129
NI SCXI-1160
NI SCXI-1161
NI SCXI-1163R
NI SCXI-1166
NI SCXI-1190
NI SCXI-1191
NI SCXI-1192
NI SCXI-1193
NI PXI-2501
NI PXI-2503
NI PXI-2565
NI PXI-2566
NI PXI-2590
NI PXI-2591
NI PXI-2593
System Requirements
LabVIEW 7.0
CVI 7.0
Minimum Processor | Pentium 200 MHz or equivalent |
RAM | 64 MB |
Screen Resolution | 800 x 600 pixels or no screen |
Operating System | Windows XP/2000/ME/98 or later |
Recommended Processor | Pentium III/Celeron 600 MHz or equivalent |
RAM | 256 MB |
Screen Resolution | 1024 x 768 pixels or no screen |
Operating System | Windows XP/2000 or later |
Installed Software Components and Locations
Item | Installed Location |
NI-SWITCH | Program FilesIVIDrivers iSwitch |
Documentation | Program FilesIVIDrivers iSwitchDocumentation |
NI-SWITCH LabVIEW 6.1 support | Program FilesNational InstrumentsLabVIEW 6.1instr.lib iSwitch |
NI-SWITCH LabVIEW 7.0 support | Program FilesNational InstrumentsLabVIEW 7.0instr.lib iSwitch |
NI-SWITCH LabVIEW Examples | Program FilesIVIDrivers iSwitchExamplesLabVIEW |
NI-SWITCH CVI support | Program FilesIVIDrivers iSwitch |
NI-SWITCH CVI Examples | Program FilesIVIDrivers iSwitchExamplesCVI |
NI-SWITCH VB Examples | Program FilesIVIDrivers iSwitchExamplesVB |
SWITCH-SFP (Soft Front Panel) | Program FilesIVIDrivers iSwitch |
New Examples
ADE | Location |
LabVIEW | <LabVIEW>examplesintr iSwitch |
CVI | Program FilesIVIDrivers iSwitchExamplesCVI |
C | Program FilesIVIDrivers iSwitchExamplesC |
VB | Program FilesIVIDrivers iSwitchExamplesVB |
New Documentation
NI-SWITCH 2.0 Readme FileNI Switches Getting Started Guide
NI Switches Help
NI-SWITCH Instrument Driver Quick Reference Guide
A Specifications document for each switch moduleTerminal Block installation guides.New Functions/VIs
niSwitch Initialize With TopologyniSwitch CommitniSwitch Route Scan Advanced OutputniSwitch Route Trigger InputniSwitch Get Relay CountniSwitch Get Relay NamesniSwitch Relay ControlniSwitch Get Relay Position
Known Issues
If reverting back to NI-SWITCH 1.6 from NI-SWITCH 2.0, you must uninstall NI-SWITCH 2.0 and reinstall NI-SWITCH 1.6.
Various support files such as .h and .lib files are installed inProgram FilesIVIandVXIpnpdirectories to support ADEs that only recognize theVXIpnpdirectory.
SCXI-1127 (Rev D and earlier) continuously drives the TTL1 trigger line on the SCXI backplane. This does not allow bus sharing of TTL1 with other SCXI modules. NI-SWITCH will return an error if an SCXI-1127 is in the chassis and if TTL1 is being used for scanning. If using the NI-DAQmx driver for your SCXI system, you will get a resource reservation error if you try to perform a switching or signal conditioning operation that requires use of TTL1.
There are known DLL collision issues with the Visual Basic debugger and a National Instruments device driver using Traditional NI-DAQ. A support DLL used by NI-SWITCH fails to load if Visual Basic has already loaded another DLL into the same address space. To change the default address that is used to load the driver DLL, create the following registry key:
\HKEY_LOCAL_MACHINESOFTWARENational InstrumentsNI-PALCurrentVersionpalConfigMemorysharedFixedAddress
where the value is a DWORD (0x44000000 generally works).
For the change to take effect, all applications must be shut down and restarted after adding the registry key.
Obsolete Functions/VIs
Easy niSwitch CIN
Easy niSwitch Close
Easy niSwitch Open
niSwitch Connect and Wait
niSwitch Control a Single Switch
niSwitch Disconnect and Wait
niSwitch EasyIO Connect
niSwitch EasyIO Disconnect
niSwitch EasyIO Reset
niSwitch EasyIO Scan
niSwitch EasyIO Scanning Acquisition
niSwitch Query a Single Switch
niSwitch Scan
niSwitch Scanning Acquisition
niSwitch Error-Query
niSwitch Get Error Info
Uninstalling NI-SWITCH 2.0
Open the Control Panel from the Start»Settings»Control Panel Menu and select AddRemove Programs.
Select National Instruments Software
and click Change.
Select NI-SWITCH 2.0 from the list provided and click Uninstall.
Changes/Fixes in NI-SWITCH 2.0 from 1.6
SCXI switches and the PXI-2566/2593 can be configured under NI-DAQmx Devices in MAX.
NI-SWITCH 2.0 requires installation of NI-DAQmx. Traditional DAQ is required for existing applications that use NI-SWITCH.