下载中心

NI-SCOPE 3.9.7 Win32/64 Eng/Jpn NI示波器驱动程序SCOPE3.9.7

文章来源:石鑫华视觉网时间:2022-06-06 16:07:40 点击:186

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI-SCOPE 3.9.7 Win32/64 Eng/Jpn NI示波器驱动程序SCOPE3.9.7

NI-SCOPE
NI-SCOPE为使用NI示波器产品的客户提供支持。
NI-SCOPE仪器驱动可帮助您进行多记录采集、连续采集、多板同步，并利用超过50个测量和分析函数以及传统示波器的功能。NI-SCOPE是一种兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供了一系列操作和属性，可以执行波形或信号发生器的功能，并包含了交互式软件前面板和示例。

Win32/64Eng/Jpn
3.9.7
文件大小: 1749533568 字节 (1.63 GB)
修改日期: 2019-06-25 03:09
MD5: 3d7f940947e7d363064bffd532865639（官方正确）
SHA1: 832084b0c69ea693e64ccd5c087d54869a0a8a65
SHA256: b3e3f220907b702eb1d4e49df2b358d97cef4fd7f71e66f9763bd34efde9a235
CRC32: 4019a5c7

百度网盘与NI官方下载地址：

http://pcmv.cn/thread-26779-1-1.html?fromuid=9

(出处: 机器视觉论坛)

NI-SCOPE Readme

Version 3.9.7

Thank you for using NI-SCOPE. This file contains important information about NI-SCOPE and is organized into the following sections:

New Features
Supported Hardware
System Requirements
Installed File Names and Locations
Updates and Notifications
Installing/Uninstalling/Modifying NI-SCOPE
Programming in NI-SCOPE
Known Issues
Bug Fixes
Automating the Installation of NI Products
Important Information

New Features in NI-SCOPE 3.9.7

Redesigned the NI-SCOPE Soft Front Panel.

NI-SCOPE 3.9.6 adds 1MOhm support for the NI PXIe-5185/5186, 12.5 GS/s high-speed digitizers (new model)

NI-SCOPE 3.9.4 adds support for LabVIEW 2012.

NI-SCOPE 3.8.9 adds support for NI-RFSA 2.5.2.

NI-SCOPE 3.8.8 adds a critical bug fix for NI 5900 digitizer.

NI-SCOPE 3.8.7 adds critical bug fixes for NI 5185/5186 digitizers.

NI-SCOPE 3.8.6 adds support for NI-RFSA 2.5.

NI-SCOPE 3.8.5 includes the following new features:

Support for LabVIEW 2011

Addition of the following NI-TClk functions/VIs and attributes/properties:

LabVIEW VI	C/C++ Function
niTClk Setup For Sync Pulse Sender Synchronize	niTClk_SetupForSyncPulseSenderSynchronize
niTClk Synchronize to Sync Pulse Sender	niTClk_SynchronizeToSyncPulseSender
niTClk Finish Sync Pulse Sender Synchronize	niTClk_FinishSyncPulseSenderSynchronize

Labview Property	C/C++ Attribute
NI-TClk SyncPulseSender:External Pulse Source	NITCLK_ATTR_SYNC_PULSE_SENDER_SYNC_PULSE_SOURCE

NI-SCOPE 3.8 includes the following new features:

Support for the NI PXIe-5185/5186, 12.5 GS/s high-speed digitizers
Support for including NI-SCOPE run-time in custom installers built using National Instrument Application Development Environments (ADEs). This installer contains instrument driver run-time components required to deploy applications using National Instruments high-speed digitizers.
Notes:

The run-time installer does not contain support for interactively configuring or testing hardware using Measurement & Automation Explorer (MAX), NI LabVIEW Signal Express, or the NI-SCOPE Soft Front Panel.
The run-time installer does not support upgrading from NI-SCOPE 3.6.x or earlier and NI-DAQmx 8.9.x or earlier.
The run-time installer does not support the NI 5102, NI 5112, NI 5620, or NI 5621.

Supported Hardware

The following table shows which hardware products are supported under particular operating systems.

Hardware Product	Windows XP	Windows Vista 32-Bit	Windows Vista 64-Bit	Windows 7 32-Bit	Windows 7 64-Bit
NI PXI/PCI-5102	Yes	Yes	No	Yes	No
NI PCMCIA/USB/AT-5102*	Yes	No	No	No	No
NI PXI/PCI-5105	Yes	Yes	Yes	Yes	Yes
NI PXI/PCI-5112	Yes	Yes	No	Yes	No
NI PXI/PCI-5114	Yes	Yes	Yes	Yes	Yes
NI PXI/PXIe/PCI-5122	Yes	Yes	Yes	Yes	Yes
NI PXI/PCI-5124	Yes	Yes	Yes	Yes	Yes
NI USB-5132/5133	Yes	Yes	Yes	Yes	Yes
NI PXI/PCI-5142	Yes	Yes	Yes	Yes	Yes
NI PXI/PCI-5152	Yes	Yes	Yes	Yes	Yes
NI PXI/PCI-5153	Yes	Yes	Yes	Yes	Yes
NI PXI/PCI-5154	Yes	Yes	Yes	Yes	Yes
NI PXIe-5185/5186	Yes	Yes	Yes	Yes	Yes
NI PXI-5620	Yes	Yes	No	Yes	No
NI PXI-5621	Yes	No	No	No	No
NI PXIe-5622	Yes	Yes	Yes	Yes	Yes
NI PXI-5900	Yes	Yes	Yes	Yes	Yes
NI PCI-5911*	Yes	No	No	No	No
NI PXI/PCI-5922	Yes	Yes	Yes	Yes	Yes
*NI PCMCIA/USB/AT-5102 and NI PCI-5911 are Legacy products.

Note: MXI-4 is supported on Windows XP and later. MXI-3 is supported only on Windows XP.

Device-specific information about these modules is included in the NI High-Speed Digitizers Help.

System RequirementsSupported Operating Systems

NI-SCOPE 3.9.7 and later support the following operating systems:

Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 3 (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)

It is recommended that you have the most recent service pack for your operating system installed. Windows 2000 users must use NI-SCOPE 3.6 or earlier.

Supported Real-Time Operating Environments

NI-SCOPE 3.9.7 and later support the following real-time operating environments:

LabVIEW Real-Time Module
LabWindows™/CVI™ Real-Time Module

LabVIEW Real-Time Module
LabWindows™/CVI™ Real-Time Module

Minimum System Requirements

Processor—Pentium III/Celeron 600 MHz or equivalent
RAM—

Windows XP Service Pack 3 (SP3): 128 MB
Windows 7/Windows Vista: 512 MB

Microsoft Internet Explorer 5.5 or later
A screen resolution of 800 x 600 with 256 colors
Windows 7/Vista/XP SP3, with all available critical updates and service packs

Recommended System

Processor—Pentium 4 or equivalent
RAM—

Windows XP SP3: 256 MB
Windows 7/ Windows Vista: 1 GB

A screen resolution of 1024 x 768
Windows 7/Vista/XP SP3, with all available critical updates and service packs

Application Development Environments (ADEs)

LabVIEW 2009 SP1 (32-bit), 2009 SP1 (64-bit), 2010 SP1 (32-bit), 2010 SP1 (64-bit), 2011 SP1 (32-bit), 2011 SP1 (64-bit), 2012 (32-bit), or 2012 (64-bit)
LabVIEW Real-Time Module 2009 SP1, 2010 SP1, 2011 SP1, or 2012 (NI PXI-4065, NI PXI-4070, NI PXI-4071, and NI PXI-4072 devices only)
Note: Not all devices are supported by the LabVIEW Real-Time Module.
LabVIEW Real-Time Module
Supported Hardware
NI 5105
NI 5114
NI 5122
NI 5124
NI 5142
NI 5152
NI 5153
NI 5154
NI 5185
NI 5186
NI 5622
NI 5900
NI 5922
LabWindows/CVI 9.0.1 or later
LabWindows/CVI Real-Time Module 2009 or later (NI PXI-4065, NI PXI-4070, NI PXI-4071, and NI PXI-4072 devices only)
Microsoft Visual C++ (MSVC) 6.0 or later
If you are running your application on an RT target, 128 MB of memory or more is required.

Installed File Names and Locations

<NIDocDir> is an alias for the following National Instruments file folder location:

Windows XP: Documents and SettingsAll UsersShared DocumentsNational Instruments
Windows 7/Vista: UsersPublicDocumentsNational Instruments

<IVIROOTDIR32> is an alias for the following National Instruments file folder location:

Windows 7 (32-bit)/Vista (32-bit)/XP: Program FilesIVI
Windows 7 (64-bit)/Vista (64-bit): Program Files (x86)IVI
Windows 7 (32-bit)/Vista (32-bit)/XP: Program FilesIVI FoundationIVI
Windows 7 (64-bit)/Vista (64-bit): Program Files (x86)IVI FoundationIVI
Note $(IVIROOTDIR32) is configured as an environment variable on the target system.

If you upgraded an installation of IVI, your files may be located in the following location:

<IVIROOTDIR64> is an alias for the following National Instruments file folder location:

Windows 7 (64-bit)/Vista (64-bit): Program FilesIVI FoundationIVI
Note $(IVIROOTDIR64) is configured as an environment variable on the target system.

File Locations

Item	Installed Location on Windows XP/2000 and Windows 7/Vista 32-bit
NI-SCOPE	<IVIROOTDIR32>Drivers iScope
NI-SCOPE Function Panel	<IVIROOTDIR32>Drivers iScope iScope.fp
NI-SCOPE Examples	<NIDocDir> iScopeExamples
NI-SCOPE Header files	<IVIROOTDIR32>Include
NI-SCOPE Import Library files (32-bit)	<IVIROOTDIR32>Lib
NI-SCOPE Import Library files (64-bit)	<IVIROOTDIR32>Lib_x64
NI-SCOPE DLL (32-bit)	<IVIROOTDIR32>Bin
NI-SCOPE Firmware Updaters	Program FilesNI-DAQpgafiles

Additional File Locations for Windows 7/Vista 64-bit

Item	Installed Location on Windows Vista 64-bit
NI-SCOPE Function Panel	<IVIROOTDIR64>Drivers iScope iScope.fp
NI-SCOPE Header files	<IVIROOTDIR64>Include
NI-SCOPE Import Library files (64-bit)	<IVIROOTDIR64>Lib_x64
NI-SCOPE DLL (64-bit)	<IVIROOTDIR64>Bin
NI-SCOPE Firmware Updaters	Program Files (x86)NI-DAQpgafiles

Documentation

Most documentation is available at Start»All Programs»National Instruments»NI-SCOPE»Documentation. The documentation set is composed of the following documents:

NI High-Speed Digitizers Getting Started Guide
NI High-Speed Digitizers Help
Device Specifications
Calibration Procedures

Note: Printed copies of device specifications are shipped with each device.

Updates and Notifications

National Instruments releases critical software updates after product release using the NI Update Service. Visit ni.com/info and enter updates to view a list of all currently available updates.

National Instruments provides notification of certain critical issues at install time. Visit ni.com/info and enter notifications to view a list of current product notifications.

Installing/Uninstalling/Modifying NI-SCOPEInstalling NI-SCOPE

This section provides information on installing NI-SCOPE and NI-DAQ and upgrading from previous versions of NI-SCOPE.

NI-SCOPE installs NI-DAQ if it is not already installed, or if an earlier version of NI-DAQ is installed. NI-DAQ support files will be installed if you have LabVIEW or LabWindows/CVI in your system. However, the only component that NI-SCOPE needs from NI-DAQ is the device driver.

Upgrading from a Previous Version of NI-SCOPE

Upgrading from NI-SCOPE 1.0 and 1.1—NI-SCOPE does not install over NI-SCOPE 1.0 or 1.1. You must uninstall these versions of NI-SCOPE before installing a later version of NI-SCOPE.

Upgrading from NI-SCOPE 1.5 and later—NI-SCOPE automatically uninstalls any previous version that is greater or equal to 1.5. If you have modified any old examples, these will be overwritten by the new versions.

Uninstalling/Modifying NI-SCOPE

For Windows XP, complete the following steps:

Launch the Control Panel by selecting Start»Control Panel.
Double-click Add or Remove Programs.
Select National Instruments Software.
Click Change/Remove.
Select NI-SCOPE 3.9.7 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.

For Windows Vista, complete the following steps:

Launch the Control Panel by selecting Start»Control Panel.
Double-click Programs and Features.
Select National Instruments Software.
Click the Uninstall/Change button.
Select NI-SCOPE 3.9.7 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.

As part of the NI–SCOPE installation, the following software is installed. To completely remove the NI-SCOPE installation from your system, you must also remove all of the following packages:

NI IVI Compliance Package 4.4
NI-VISA 5.0
NI-DAQmx 9.1.7
Traditional NI-DAQ 7.4.4
NI Measurement & Automation Explorer 4.7.2
NI Hierarchical Waveform Storage 1.4.9
NI Spy 2.7.2

Caution Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.

Note Do not attempt to uninstall by manually deleting files.

Programming in NI-SCOPE

NI-SCOPE provides an intuitive, full-featured interface for programming your hardware. NI-SCOPE is IVI-Scope compliant. For more information, refer to niScopeIVIComplianceDocument.txt.

Software Examples

NI-SCOPE ships with several examples for LabVIEW, LabWindows/CVI, Measurement Studio, MSVC, Visual C++, and Microsoft Visual Basic that will help you develop your software. These examples illustrate how to perform the most common operations with your hardware. To find the examples, go to Start» Programs»National Instruments»NI-SCOPE»Examples.

NI-SCOPE Soft Front Panel

The NI-SCOPE Soft Front Panel (SFP) is a software oscilloscope application for NI high-speed digitizers. It has the following features:

Familiar interactive user interface
Robust architecture
Scalar measurements
Save/load waveforms
Save/load configurations
Low CPU usage

The NI-SCOPE SFP demonstrates some of the capabilities of NI high-speed digitizers and enables you to start using your new digitizer immediately without the need to know a programming language. The NI-SCOPE SFP is installed by default as a feature of the NI-SCOPE installation. To remove the NI-SCOPE SFP use the Add/Remove Programs option.

Known Issues

You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in NI-SCOPE 3.9.7.

Bug Fixes

The following list contains changes from earlier versions of NI-SCOPE to NI-SCOPE 3.9.7. If you have a Bug ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of NI-SCOPE.

ID	Fixed Issue
328318	Fixed an issue that caused NI-SCOPE 3.7 to not support Visual Basic 6.
341670	Fixed an issue where the NI-SCOPE Soft Front Panel does not launch under certain conditions.
336845	Fixed an issue where TClk synchronization is not consistent between multiple sessions when using NI PXIe-5185 or NI PXIe-5186.
327321	Fixed an issue where NI PXI-5105 returns incorrect data at low sample rates (<20 kS/s) if the channel list size is not a power of 2.
315548	Fixed an issue that caused the first channel in the channel list to return incorrect data when using the niScope EX Fetch Forever VI with multiple channels. You can find this example VI at Start» Programs»National Instruments»NI-SCOPE»Examples.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.

Important Information

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFEULAs directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

Trademarks

CVI, LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

Note	$(IVIROOTDIR32) is configured as an environment variable on the target system.
	If you upgraded an installation of IVI, your files may be located in the following location:

下载中心

NI-SCOPE 3.9.7 Win32/64 Eng/Jpn NI示波器驱动程序SCOPE3.9.7