下载中心

NI Circuit Design Suite 14.0.1 Patch Win32Eng/Ger NI电路设计套件14.0.1补丁

文章来源:石鑫华视觉网时间:2022-06-06 12:31:17 点击:192

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Circuit Design Suite 14.0.1 Patch Win32Eng/Ger NI电路设计套件14.0.1补丁

Circuit Design Suite(CDS)电路设计套件

电路设计套件结合了Multisim和Ultiboard软件，为电路设计、仿真、验证和布局提供了一套完整的工具。
电路设计套件为您提供了直观且经济高效的设计电路工具。您可以执行交互式SPICE仿真并无缝转换到PCB布局和布线软件。该套件专为教学、科研和设计而开发，提供了先进的仿真功能，可以让您清楚地了解电路在各种场景下的性能。

14.0.1Patch
文件大小: 30257376 字节 (28.86 MB)
修改日期: 2019-06-25 02:41
MD5: b84b35696f2ff3d67f8e148d26edb676
SHA1: d8aa223c6c9e6babf8ad7e8c5e44596782179f16
SHA256: 02b646c9d44de5cee4e6bb781e6ada5169de05d4a5f4d4f5ea97532b03718bad
CRC32: 9232b382

百度网盘与NI官方下载地址：

http://pcmv.cn/thread-26722-1-1.html?fromuid=9

(出处: 机器视觉论坛)

NI Circuit Design Suite 14.0.1 Readme for Windows

February 2016

This file contains important last-minute information about Circuit Design Suite 14.0.1 for Windows, including installation and compatibility issues.

Refer to Getting Started with NI Circuit Design Suite for information about getting started with Circuit Design Suite. You can access this PDF from Start»All Programs»National Instruments»Circuit Design Suite 14.0»Documentation»Circuit Design Suite 14.0 Getting Started.

You can also access this from the Multisim or Ultiboard Help menu.

Supported Platforms
Installing Circuit Design Suite 14.0.1
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
Product Security and Critical Updates
Known Issues
Bug Fixes
New Components
Legal Information

Supported Platforms

To run Circuit Design Suite 14.0.1, your operating system (OS) must be one of:

Windows 10/8.1/8/7/Vista (32-bit and 64-bit).
Windows XP SP3 (32-bit).
Windows Server 2008 R2 (64-bit).
Windows Server 2003 R2 (32-bit).

Circuit Design Suite 14.0.1 does not support Windows NT/Me/98/95/2000, Windows XP x64, or the Windows Server non-R2 editions.

Your system must also meet or exceed the following:

Pentium 4/M class microprocessor or equivalent.
512 MB of memory (256 MB minimum).
2 GB of free hard disk space.
1024 x 768 screen resolution.
To develop custom LabVIEW-based instruments for use in Multisim, LabVIEW 2014 or 2015 is required.

NI Circuit Design Suite Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

National Instruments Circuit Design Suite will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of Circuit Design Suite that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about Circuit Design Suite's product life cycle, visit NI Multisim OS Support and System Requirements. The information on this page applies to Multisim and Ultiboard.

Installing Circuit Design Suite 14.0.1Installing Multiple Versions

Circuit Design Suite 14.0.1 updates Circuit Design Suite 14.0 side-by-side with Circuit Design Suite 13.x and prior.

Archiving Circuit Design Suite databases

National Instruments recommends that you regularly back up the files created within the Multisim and Ultiboard components of NI Circuit Design Suite. Additionally, you should back up internal files that store user-created data, such as databases. For more information about which files to backup and where to find them, refer to the Help.

Uninstalling

Uninstalling Circuit Design Suite will not remove user data. For more information about the locations of user database and configuration files, refer to the Archiving Data Help topic.

Circuit Design Suite 14.0.1 Updates and Notifications

National Instruments posts information about critical updates and security notifications on ni.com. Visit ni.com/info and enter Info Code updates to access this information.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during an automatic installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Using NI Software with Microsoft Windows 8.1

When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications to either the Start screen or the Taskbar on the desktop, as necessary:

Current Application	Icon Location	Pin to Action
Windows 8.1 Desktop	Desktop Taskbar	Right-click application and select Pin to Taskbar
Windows 8.1 Desktop	Start screen	Right-click application and select Pin to Start
Windows 8.1 Start screen	Desktop Taskbar	Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.

For more information about NI support for Windows 8.1, visit ni.com/windows8.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.

Known IssuesLabVIEW

LabVIEW functionality (LabVIEW instruments and grapher interpolation) will not work if the installation path uses characters that are not native to the "Language for non-Unicode programs" setting, available by selecting Start»Control Panel»Regional and Language Options and selecting the Advanced tab. In the Vista OS, use the "Current language for non-Unicode programs:" setting in the Administrative tab. LabVIEW functionality works for Unicode characters that are native to this setting.

Windows Vista

You cannot install Circuit Design Suite 14.0.1 on Windows Vista Starter edition.

Circuit Design Suite

Multisim and Ultiboard leak GDI resource handles when used over extended periods of time, eventually leading to unpredictable user interface behavior and crashes. This is an issue with MFC applications running on Windows XP SP2 and Windows Server 2003. For more information and workarounds, refer to KB 4JREGSXL:Multisim or Ultiboard Leaking GDI Resource Handles.

Multisim Help and Ultiboard Help display in very small windows on high resolution monitors (e.g., 3200 x 1800). To enlarge the windows, click in a help topic, hold down the Ctrl key and spin the mouse wheel. For notebook computers with precision touchpads, hold down the Ctrl key and use pinch-in and pinch-out gestures to zoom to the desired level.

Bug Fixes

The following is a subset of the issues fixed since the last release of Circuit Design Suite.

Multisim ( 47 )
Bug ID	Description
552261	Changing Windows scale to a high value will affect Labview instrument's front panels.
558467	Netlist sometimes fails on DC OP Point when UIC is specified.
560790	Nexys2 config files do not contain clock pin information.
523358	Basys3 config file should not reference a non-existent user constraint file.
526709	Schematic designs sometimes open with oversized drawn components.
517117	Simple purely linear circuit does not converge.
553522	Poor recovery from divide by zero in expressions.
550584	The Logic Converter instrument is unable to build some circuits from expressions in Windows 10.
553490	Malconfigured pulse source causes an internal error during simulation.
435230	The Spice Parser have different behavior for a node that is located as a node and in an expression.
283552	Search for Components only searches for Component RefDes.
534878	Convergence error when building a circuit using the 555 Timer Wizard using its default values.
534639	Automatically calculating TMAX is failing for simple circuits.
542863	Current Probe variable sometimes is not showing up on Grapher.
534833	Circuit simulates even though there is no ground present in the schematic.
525445	Probes do not show up in output variable lists when they are connected to advanced level transistors.
478804	Symbol pin name "NC" does not get rename automatically when creating a multi-section part.
498811	When a net is named with the word 'open' it will not show in the analysis output tab.
533014	OECL import has incorrect fill behavior.
534762	Upon transferring to Ultiboard sometimes some net connections are not preserved.
509585	Upon using a large tdm or tdms file and selecting the Reload file option for a TDM source component, Multisim will take a long time to load the data.
518678	Upon re-sizing the edit model dialog, the model data area will overwrite the model header box.
525451	Changes to the Routing Layers in Net Properties PCB tab does not get applied.
515521	Selecting the Simplified Version option will add redundant menus in Breadboard view.
402113	Component wizard allows you to proceed with no package pins mapped.
371670	Wire routing for certain pin types behaves incorrectly.
483318	Disabled values in dynamic dialog are editable after the dialog is reopened.
535399	When running LabVIEW-Multisim co-simulation, Multisim may crash if the Multisim design file is copied to a new location and the VI is updated to reference that new location.
508357	Component Refdes can incorrectly be edited from its Value tab.
517171	When merging two single pin sources there is no conflict dialog for other existing sources on page or multi-page design.
532809	Word generator single-stepping has incorrect behavior.
518526	Nested ternary expressions are not handled well by the SPICE parser.
525293	Multisim will truncate silently a model name that is greater than 49 characters.
513013	Edit model dialog not showing instance parameters when default parameters are specified in the template.
528549	Deleting multi-pages then backward annotating from a ewnet file may lead to a crash in Multisim.
526512	Circuit Parameters data sometimes is lost when design is opened.
524758	VSWITCH device should support the hysteresis parameters.
506434	User field titles are not immediately updated in Database Manager, Components tab.
524983	Model mapping is being affected when there is NC for pin name in the model.
524605	Advanced Pin Mapping maps pins incorrectly when sorting a Multi section component pin table.
520020	Cannot Search specifically for Buses anymore.
523846	In a 32-bit OS, refreshing a PLD device status with 64-bit Xilinx tool can crash the application.
523348	Multisim runs out of memory when running ac sweep from a very small frequency, which can lead to a crash.
517340	Complete Replace Components operation on any page other than the one the selected component is on will lead to a crash.
520916	The revision field within Title Block is limited to only 3 characters.
523178	Component properties are not updated properly when hidden pins are added/renamed.
517887	Device specific parameters value does not allow to enter a decimal point.
Ultiboard ( 16 )
Bug ID	Description
553185	Off-centered holes on pads revert back to the center after saving.
547814	Exporting Gerber and NC Drill in imperial unit does not match the drill target and hole locations.
535013	Exporting Gerber 274X will generate file with missing D code 10.
488146	Gate Swap does not work for custom component when its footprint is on the User DB.
496161	Ultiboard reference Identifier label is set back to the default position after updating the part.
480717	Default settings for PCB copper layers are not always respected by the layers in the design toolbox.
537054	Square holes are reported as design rule violations on export but not on DRC check.
537067	Picture properties not working consistently when importing bitmaps and using keep aspect ratio.
539855	Placing images in footprint edit mode should not create true-colour images.
511935	Cannot place picture from right-click menu in net bridge edit or custom pad shape edit modes.
515037	Using the Follow-me router to complete a route may sometimes hang Ultiboard.
469108	Unable to place a SMT part under another SMT part on the opposite side due to a corrupted hidden attribute.
508292	When Custom Hole and Standard Hole shapes are selected, then opening their shared Properties can lead to a crash.
513232	When Keep-In area has the Part Height option set and placing a part from the CAD family can lead to a crash.
511757	Cannot Export design reports in HTML format type.
519656	German Ultiboard displays Drill Symbols table header text with '?' in some of the words.

New Components

Refer to the Database section of the Multisim 14.x Features and Improvements topic of Multisim Help for a list of new components.

Legal InformationCopyright

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

375231B-01

下载中心

NI Circuit Design Suite 14.0.1 Patch Win32Eng/Ger NI电路设计套件14.0.1补丁