下载中心

NI Circuit Design Suite 13.0.1 Patch Win32Eng/Ger/Jpn NI电路设计套件13.0.1补丁

文章来源:石鑫华视觉网时间:2022-06-06 12:27:27 点击:178

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Circuit Design Suite 13.0.1 Patch Win32Eng/Ger/Jpn NI电路设计套件13.0.1补丁

Circuit Design Suite(CDS)电路设计套件

电路设计套件结合了Multisim和Ultiboard软件，为电路设计、仿真、验证和布局提供了一套完整的工具。
电路设计套件为您提供了直观且经济高效的设计电路工具。您可以执行交互式SPICE仿真并无缝转换到PCB布局和布线软件。该套件专为教学、科研和设计而开发，提供了先进的仿真功能，可以让您清楚地了解电路在各种场景下的性能。

13.0.1Pro/Edu Patch
文件大小: 24528077 字节 (23.39 MB)
修改日期: 2019-06-25 02:41
MD5: c75216e23ab8b97e96a8cb3e29be4c0b（官方正确）
SHA1: 38c21da4ea183c1216533a4ef17f1b75120eb2f6
SHA256: 28bad1c18303f62390047988a1c065720ab3591ccce095785d1648fb060c9ee4
CRC32: 07adc910

百度网盘与NI官方下载地址：

http://pcmv.cn/thread-26717-1-1.html?fromuid=9

(出处: 机器视觉论坛)

NI Circuit Design Suite 13.0.1 Readme for Windows

March 2014

This file contains important last-minute information about Circuit Design Suite 13.0.1 for Windows, including installation and compatibility issues.

Refer to the Getting Started with NI Circuit Design Suite manual for information about getting started with Circuit Design Suite. You can access this PDF from Start»All Programs»National Instruments»Circuit Design Suite 13.0»Documentation»Circuit Design Suite 13.0 Getting Started.

Supported Platforms
Installing Circuit Design Suite 13.0.1
Product Security and Critical Updates
Known Issues
Bug Fixes
New Components

Supported Platforms

Circuit Design Suite 13.0.1 supports Windows 8/7/Vista 32-bit and 64-bit editions, Windows XP 32-bit edition, Windows Server 2003 R2 (32-bit) and Windows Server 2008 R2 (64-bit). Circuit Design Suite 13.0.1 does not support Windows 2000/NT/Me/98/95, Windows XP 64-bit edition, or the Windows Server non-R2 editions.

NI Circuit Design Suite Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

National Instruments Circuit Design Suite will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of Circuit Design Suite that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about Circuit Design Suite's product life cycle, visit NI Multisim OS Support and System Requirements. The information on this page applies to Multisim and Ultiboard.

Installing Circuit Design Suite 13.0.1Installing Multiple Versions

Circuit Design Suite 13.0.1 installs over version 13.0 and side-by-side with previous versions of Circuit Design Suite.

Archiving Circuit Design Suite databases

National Instruments recommends that you regularly back up the files created within the Multisim and Ultiboard components of NI Circuit Design Suite. Additionally, you should back up internal files that store user-created data, such as database components. For more information about which files to backup and where to find them, refer to the Help.

Uninstalling

Uninstalling Circuit Design Suite will not remove user data. For more information about the locations of user database and configuration files, refer to the Archiving Data Help topic.

Circuit Design Suite 13.0.1 Updates and Notifications

National Instruments posts information about critical updates and security notifications on ni.com. Visit ni.com/info and enter Info Code updates to access this information.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.

How to Use NI Software with Microsoft Windows 8

When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications to either the Start screen or the Taskbar on the desktop, as necessary:

Current Application	Icon Location	Pin to Action
Windows 8 Desktop	Desktop Taskbar	Right-click application and select Pin to Taskbar
Windows 8 Desktop	Start screen	Right-click application and select Pin to Start
Windows 8 Start screen	Desktop Taskbar	Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.

For more information about NI support for Windows 8, visit ni.com/windows8.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.

Known IssuesLabVIEW

LabVIEW functionality (LabVIEW instruments and grapher interpolation) will not work if the installation path uses characters that are not native to the "Language for non-Unicode programs" setting, available by selecting Start»Control Panel»Regional and Language Options and selecting the Advanced tab. In the Vista OS, use the "Current language for non-Unicode programs:" setting in the Administrative tab. LabVIEW functionality works for Unicode characters that are native to this setting.

Windows Vista

You cannot install Circuit Design Suite 13.0.1 on Windows Vista Starter edition.

Circuit Design Suite

Multisim and Ultiboard leak GDI resource handles when used over extended periods of time, eventually leading to unpredictable user interface behavior and crashes. This is an issue with MFC applications running on Windows XP SP2 and Windows Server 2003. For more information and workarounds, refer to KB 4JREGSXL:Multisim or Ultiboard Leaking GDI Resource Handles.

Bug Fixes

The following is a subset of the issues fixed since the last release of Circuit Design Suite.

Multisim ( 30 )
Bug ID	Description
351776	Printing in Black and White removes text.
383114	Hyphen in model name prevents table view of SPICE parameters.
448013	Cannot unpack projects to another drive location other than where it was created from.
451958	Adding a model from a component can cause mapping errors.
453679	RefDes sometimes becomes incorrect after gate swaps and gate optimizations from the Advanced RefDes configuration dialog.
452928	Annotation sometimes does not find a specific footprint and will pick an incorrect footprint instead.
351727	Editing a selection font, changes font of all components placed after it.
451442	Swapping sections with different models for a multisection component will lead to errors.
443556	Netlist view window sometimes does not display data after selecting regenerate netlist.
366729	Pasting different connector types with the same name to a new design renames the connectors.
447805	Swapping RefDes's using Advanced RefDes Configuration will sometimes produce duplicate RefDes's.
358433	The lock subcircuit restriction does not seem to apply to hierarchical blocks.
429068	In a multisection component, changing its footprint pinout breaks mappings for any sections from there on.
439226	Ladder diagram fails to simulate due to large resistor in NC and NO contacts.
445183	Unable to replace the footprint of an interactive component from the spreadsheet view.
440274	Multisim Full edition should not have the Model Maker button active.
445770	Back annotating to Multisim when a component is not found in the database will sometimes lead to a crash.
443648	DC operating point failure fallback method sometimes produces inconsistent results.
443867	Cannot replace a multisection component after the third attempt.
443230	Netlist errors when one section of a component doesn't have a model.
274991	The size of a model seems to affect the time it takes to open its property window.
274589	Component wizard does not warn user if .subckt is not terminated with .ends.
442364	RefDes duplication sometimes happens after component replace.
441098	Interactive DC sources sometimes do not preserve slider position on import.
423563	SVG circles are always imported with radii multiple of 3 with OECL import.
429474	Negative temperature coefficient for a resistor is causing simulation error.
438559	Sometimes Multisim is unable to edit the user fields for a corporate database.
274687	Multisim does not import OrCAD file correctly sometimes.
435191	IRAM section of MCU memory view is not being displayed properly.
422933	Multisim cannot communicate with some boards using Xilinx ISE 12.4.
Ultiboard ( 19 )
Bug ID	Description
456570	Some landpattern changes in Ultiboard sometimes do not correctly backannotate to Multisim.
456503	3D DXF files do not export board thickness correctly.
452986	NC Drill settings are not restored from scheme file if NC drill window is open.
453023	Cancelling netlist editor dialog makes hidden changes to grouped net settings.
453286	Net settings for clearances does not always properly adhered to.
450388	Ultiboard design file sometimes gets corrupted after importing a bitmap file.
450425	Ultiboard security copy file sometimes gets overwritten by a corrupt file.
449740	Trace width changes in Net Group dialog not working for Edu, Full or Student tiers.
447448	Forward annotating a file with a ground net may sometimes lead to a crash.
443872	Unable to ungroup a group comprising of only attributes.
443838	Number of layers in the place powerplane dialog box doesn't match the design toolbox.
447750	A DRC is not generated whenever a trace crosses a round board outline and a net.
442363	Text attributes disappear when multiple text attributes are grouped together.
440757	Gerber files are sometimes being exported incorrectly due to default imperial precisions.
439841	DXF data doesn't appear on the workspace when the 'closed polyline to polygon" is checked.
439868	Creating a rounded rectangle custom pad image with modified xy coordinates will not show it properly once placed.
440292	Autorouter sometimes does not work correctly with custom pads.
443226	Swapping layers no longer auto deleting vias.
406117	Confusing Labels In Select Groups for Replica Place Dialog.

New ComponentsADI

48 new.

Avago Technologies

207 new.

Efficient Power Conversion (EPC)

13 new.

Infineon

715 new.

Maxim

19 new.

Microchip

55 new.

NXP Semiconductors

193 new.

ON Semiconductor

166 new.

Texas Instruments

507 new.

Vishay

457 new.

Important InformationCopyright

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

下载中心

NI Circuit Design Suite 13.0.1 Patch Win32Eng/Ger/Jpn NI电路设计套件13.0.1补丁