石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI Circuit Design Suite 11.0 Patch Win32Eng/Ger/Jpn NI电路设计套件11.0补丁

文章来源:石鑫华视觉网时间:2022-06-06 12:16:46 点击:192

Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Circuit Design Suite 11.0 Patch Win32Eng/Ger/Jpn NI电路设计套件11.0补丁

Circuit Design Suite(CDS)电路设计套件

电路设计套件结合了Multisim和Ultiboard软件,为电路设计、仿真、验证和布局提供了一套完整的工具。
电路设计套件为您提供了直观且经济高效的设计电路工具。您可以执行交互式SPICE仿真并无缝转换到PCB布局和布线软件。该套件专为教学、科研和设计而开发,提供了先进的仿真功能,可以让您清楚地了解电路在各种场景下的性能。

11.0Pro/Edu Patch
文件大小: 18554021 字节 (17.69 MB)
修改日期: 2010-05-26 03:05
MD5: 0e4c4c5b76e37924a40b68dffcba0de8(官方正确)
SHA1: 04e636062e8d8712ce6d85350bc41380a8c1ba67
SHA256: 223ffaffc5198fb5f64bd0b3691e6dc9952c0718dadd4d0402f7fe20ce573991
CRC32: 9ba67590

百度网盘与NI官方下载地址:

NI Circuit Design Suite 11.0 Patch Win32Eng/Ger/Jpn NI电路设计套件11.0补丁

http://pcmv.cn/thread-26701-1-1.html?fromuid=9

(出处: 机器视觉论坛)


NI Circuit Design Suite 11.0.0.2 Readme for Windows

June 2010
This update includes the bug fixes listed for Circuit Design Suite 11.0.0.2 and 11.0.0.1.

Bug Fixes

The following issues were fixed in the Circuit Design Suite 11.0.0.2 update.
Multisim ( 7 )
Bug IDDescription
117007Power Factor reading from the wattmeter is incorrect in some cases.
117016Multisim crashes in some cases while displaying the Database Manager.
117111Multisim crashes while simulating using certain instruments in some cases.
117257Hiding RefDes using Sheet properties in a SC/HB removes the hierarchical connection information.
117273Printing a PLD design crashes Multisim in some cases.
117065Changing a setting in the function generator instrument during simulation inverts the duty cycle percentage.
116517The function generator instrument does not respect setting changes made during simulation when connected in certain configurations.
The following issues were fixed in the Circuit Design Suite 11.0.0.1 update.
Multisim ( 12 )
Bug IDDescription
116486Connecting a component to pins in Ultiboard will not correctly back annotate when it is in a hierarchical block.
116625Disabling the NI ELVISmx Arbitrary Waveform Generator output signal while simulating will crash Multisim.
116837RefDes change is not back annotated if component is not present in any of the component databases.
116873Hidden pin information gets cleared after a RefDes rename in some cases.
116890Multisim crashes when importing older files in some cases.
116911Renaming multisection component RefDes to lower case can crash Multisim.
116928Flipping a voltmeter or ammeter horizontally crashes when only one pin is connected.
116957Back Annotation crashes Multisim in some cases after Rename/Renumber Components has been used.
117004Dragging components is slower in Multisim 11.0.0 than it was in Multisim 10.1.1 in some cases.
117036ERC is flagging NC pins as warning for unconnected pins.
117054Undoing a delete trace action in the grapher can crash Multisim.
117075RefDes visibility setting is ignored for power source components.
Ultiboard ( 5 )
116910Placing a hole causes the DXF export to generate a large file.
116956Incorrect gate swap, pin connections and conflicts when forward annotating in some cases.
116966Ultiboard can become unresponsive while trying to open certain designs.
117033Ultiboard crashes when closing an open design in some cases.
116874Thermal relief settings for copper areas are inverted in some cases.

Copyright

© 2010 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

Trademarks

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Electronics Workbench, Multisim and Ultiboard are trademarks of National Instruments. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or ni.com/patents.


首页
84162741QQ
联系