Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活:NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种NI资源,除了视觉相关的模块有使用外,大部分的都不会使用,仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址,只能使用百度网盘地址;如果百度网盘地址失效过期,可联系论坛客服更新。NI的服务器在美国,有时候速度很慢或下载容易出错,这样会造成安装时各种错误而无法安装。建议在下载完成后,对下载资源做校验和(NI一般会提供MD5或SHA256等)验证,与官方或视觉论坛提供的校验和对比,一致就可以安装;如不一致,则需要重新下载。视觉论坛早期下载上传的资源,基本上都是正常下载的资源;2019后下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘。校验和工具下载地址:文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html
NI-WLAN Test Toolkit 18.0 Win32/64Eng NI无线局域网测试工具包18.0
WLAN测试工具包
WLAN测试工具包为WLAN 802.11a/b/g/j/p/n/af/ah/ac/ax测试应用提供了信号生成和分析功能。
WLAN测试工具包是一款应用软件,旨在扩展NI RF仪器用于WLAN 802.11信号生成和分析的功能。该软件可以通过误差矢量幅度(EVM)、频谱发射屏蔽(SEM)、发射功率(TXP)等符合标准的物理层测量,对802.11a/b/g/j/p/n/af/ah/ac/ax信号进行分析。WLAN测试工具包具有灵活的配置,可进行减损处理,提供每用户测量结果报告以及MIMO和分集配置,因而可支持多站点信号。借助WLAN测试工具包,您可通过交互式软面板快速轻松地执行和调试测量,创建和回放开放的未锁定波形,并结合更高性能的API加快自动化测试的速度。
Win32/64Eng
18.0
文件大小: 1875107840 字节 (1.75 GB)
修改日期: 2018-10-11 14:31
MD5: ac0094a8c0e798fbd214ba1b3c5cc321(官方正确)
SHA1: 06df362e19f19fe6a873db88c8f712bf9a5d20a4
SHA256: 560d01469549cd60fab72bd30f2953220f0079678039ffc5aeed7612d6147335
CRC32: 3823cc5a
百度网盘与NI官方下载地址:
NI-WLAN Test Toolkit 18.0 Win32/64Eng NI无线局域网测试工具包18.0
http://pcmv.cn/thread-26638-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI WLAN Toolkit 18.0 Readme
NI WLAN Analysis Toolkit Readme
NI WLAN Generation Toolkit Readme
Legal Information
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
NI WLAN Analysis Toolkit 18.0 Readme
New FeaturesNI WLAN Analysis Toolkit 18.0 includes the following new features:
Support for midambles in 802.11ax
Support for LabVIEW 2018 (32-bit and 64-bit)
Estimation and compensation for frequency selective Tx IQ impairments
NI WLAN Analysis Toolkit 17.5 includes the following new features:
Support for UL MU-MIMO for 802.11ax
Support for 1x HE-LTF in 802.11ax
Support for channel frequency response interpolation in 1x/2x HE-LTF for 802.11ax
Support for combined signal demodulation for 802.11ax up to 4x4 MIMO SU PPDU
Support for full preamble CFO estimation for 802.11ax
Added channel frequency response smoothing
Estimation and compensation for Rx timing skew impairment
Estimation and compensation for Rx IQ mismatch for 802.11ax
Support for preamble puncturing in 802.11ax
NI WLAN Analysis Toolkit 17.0 includes the following new features:
Support for IEEE Standard P802.11ax/D1.2
Support for all PPDUs of 802.11ax: Single-User (SU), Multi-User (MU), Extended Range SU and Trigger-Based PPDUs
Support for all channel bandwidths of 802.11ax: 20 MHz, 40 MHz, 80 MHz, 80+80 MHz and 160 MHz
Support for Downlink OFDMA and MU-MIMO for 802.11ax
Support for Uplink OFDMA for 802.11ax
Support for 8X8 MIMO for 802.11ax
Support for MCS 0 to 11 for 802.11ax
Support for noise compensation for EVM for the OFDM Demod measurement
Support for LabVIEW 2017 (32- and 64-bit)
NI WLAN Analysis Toolkit 16.0 includes the following new features:
Support for LabVIEW 2016
Support for 8x8 MIMO for IEEE Standard 802.11ac-2013 in NI WLAN Analysis Soft Front Panel
Support for querying power spectrum (dBm/RBW) trace in spectral mask measurement
Support for querying single EVM result per stream of an 80+80 MHz, 802.11ac signal in NI WLAN Analysis Soft Front Panel
Support for querying single TxP result per channel of an 80+80 MHz, 802.11ac signal in API and NI WLAN Analysis Soft Front Panel
Supported Hardware
NI PXIe-5665
NI PXIe-5663
NI PXIe-5663E
NI PXIe-5644R
NI PXIe-5645R
NI PXIe-5646R
NI PXIe-5668R
NI PXIe-5840
NI PXIe-5820
System RequirementsSupported Operating Systems
Windows 10/8.1/7 SP12 (32-bit and 64-bit)
Windows Embedded Standard 7 SP12 (32-bit and 64-bit)
Windows Server 2012 R21 (64-bit)
Windows Server 2008 R2 SP12 (64-bit)
Minimum Requirements
Processor—Pentium IV or equivalent
Free hard drive space—1 GB
RAM—2 GB
Microsoft Internet Explorer 8 or later
Supported RF vector signal analyzer with minimum 256 MB of onboard memory
Recommended System
Free hard drive space—2 GB
RAM—4 GB
Required Software
NI-RFSA 15.0 or later
NI LabVIEW Modulation Toolkit 15.0 or later
PXI Platform Services 14.0
Application Development Environments (ADEs)
LabVIEW 2015 SP1, 2016, 2017 SP1, or 2018
LabWindows/CVI 8.5.1 or later
TestStand 4.2.0 for TestStand sequences
Installed Software, Documentation, and ExamplesInstalled Software
<NIDIR> is an alias for the following National Instruments file folder location:
(32-bit OS) Program FilesNational Instruments
(64-bit OS) Program Files (x86)National Instruments for 32-bit programs and Program FilesNational Instruments for 64-bit programs
<NIDocDir> is an alias for the following National Instruments file folder location: UsersPublicPublic DocumentsNational Instruments
<LabVIEW> is an alias for the following National Instruments file folder location:
Windows 10/Windows 8.1/Windows 7: <NIDIR>LabVIEW <year>
<SYSDIR> is an alias for the following file folder location:
(32-bit OS) windowssystem32
(64-bit OS) windowsSysWow64 for 32-bit programs and windowssystem32 for 64-bit programs
File Locations
Item | Installed Location |
WLAN Analysis Soft Front Panel | <NIDIR>WLAN ToolkitWLAN Analysis Soft Front Panel.exe |
DLL | <SYSDIR> |
WLAN Calibration Utility | <NIDIR>WLAN ToolkitCalibration UtilityWLAN Calibration Utility.exe |
LabVIEW | |
VIs | <LabVIEW>i.libRF ToolkitsWLAN |
Examples | <LabVIEW>examplesRF ToolkitsWLAN |
LabWindows/CVI | |
Header Files | <NIDIR>SharedCVIInclude |
Static Libraries | <NIDIR>SharedCVIinmsvc |
.lfp/.sub Files | <NIDIR>SharedCVIin |
Examples | <NIDocDir>CVIsamplesWLAN |
C | |
Header Files | <NIDIR>SharedExternalCompilerSupportCinclude |
Import Library | <NIDIR>SharedExternalCompilerSupportClib32msvc |
Examples | <NIDocDir>WLAN ToolkitExamplesCAnalysis |
TestStand | |
Examples | <NIDIR>WLAN ToolkitTestStand |
Executable
Documentation
Document | Format | Description |
NI WLAN Analysis Toolkit Help | HTML/Windows Help | Information about NI WLAN Analysis Toolkit. The help is an HTML version of a traditional user manual that includes the following information:
|
NI WLAN Analysis Toolkit Readme | HTML (this document) | Information about supported hardware and operating systems, new features, fixed issues, and legal notices. |
Accessing VIs and Functions
Finding Examples
NI WLAN Analysis Toolkit 18.0 Drops Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003
Product Security and Critical Updates
Toolkit Version Naming Changes
Uninstalling/Modifying NI WLAN Analysis Toolkit
Launch the Control Panel by selecting Start»Control Panel.
Double-click Programs and Features.
Select National Instruments Software.
Click the Uninstall/Change button.
Select NI WLAN Analysis Toolkit 18.0 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
Right-click on the Start screen.
Select Control Panel.
Select Programs» Programs and Features.
Select National Instruments Software.
Click the Uninstall button.
Select NI WLAN Analysis Toolkit 18.0 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
Behavior Changes
The behavior of LO Frequency Offset Mode property with value Auto has been changed to address frequencies less than 2.4 GHz.
The default value of the OFDM CFR Interpolation Enabled property, which is applicable for 1x/2x HE-LTF in IEEE 802.11ax, is changed to True.
The OFDM Low Pass Filter Enabled property is bypassed for 802.11ac 80 MHz when you set the OFDM oversampling factor to -1 and the waveform IQ rate is equal to the IQ Recommended Sampling Rate (S/s).
The OFDM Oversampling Factor property is applicable for 802.11a/g, 802.11j, 802.11p, 802.11n, and 802.11ac standards.
The 802.11ac 80 MHz signal will be processed at 120 MS/s irrespective of the incoming IQ rate when the OFDM oversampling factor is -1.
The low pass filter coefficient generation is disabled if input IQ rate falls within 1 Hz of the IQ recommended sampling rate (S/s).
The default value of the LO Sharing Enabled property is changed to False.
The default value of the OFDM Common Clock Source Enabled property has been changed to True.
The NI-RFSA Downconverter Loop Bandwidth property is set to Narrow for NI 5646R.
AMPM properties are obsolete in toolkit version 14.5.
Known Issues
Bug Fixes
Bug ID | Fixed Issue |
707639 | Fixed an issue where the carrier frequency leakage results were incorrect for 802.11ax extended range SU and/or when the HE-LTF Size is 2x or 1x. |
457302 | Fixed an issue where error in the estimates of Tx IQ impariments were more for higher timing skew in 802.11 ax 40M SU PPDU. |
Bug ID | Fixed Issue |
681254 | Fixed an issue where the niWLANA RFSA Measure VI calls the niTClk Synchronize TClk VI, when TClk synchronization is enabled for multiple NI PXIe-5840 devices. |
676629 | Fixed an issue where channel estimate was not corrected for amplitude distortion when the OFDM Amplitude Tracking Enabled property was set to True. |
680970 | Fixed an issue where the result of the OFDM Detected PSDU Length result was incorrect for 802.11ax MU signals when dual carrier modulation (DCM) was enabled only for a few or all users. |
661309 | Fixed an issue where errors in the estimated sample clock offset were high for 802.11ax 40 MHz signals when the OFDM Common Clock Source Enabled property was set to False and IQ impairments compensation is enabled. |
660725 | Fixed an issue where errors in quadrature skew estimates were high in the presence of timing skew when the IQ mismatch model is Rx . |
561529 | Fixed an issue where the IQ impairments compensation was failing for 5x5 and 6x6 802.11ac MIMO signals. |
647016 | Fixed an issue where the preamble, pilots, and data method for CFO estimation was incorrect for trigger-based PPDU in 802.11ax when the OFDM measurement start location was non zero. |
680707 | Fixed an issue where the EVM reported was incorrect in the presence of ignored symbols when you set the Combined Signal Demodulation Enabled property to True. |
687193 | Fixed an issue where spectral measurements were incorrect on the NI 5665 with 25 MHz DDC. |
639337 | Fixed an issue where quadrature skew compensation was incorrect for the MIMO OFDM standards. |
Bug ID | Fixed Issue |
652843 | Fixed an issue where slight degradation in EVMs was observed for SISO signals when you set the OFDM Channel Estimation Method property to Preamble and Data for less than 20 symbols. This is in comparison with previous versions of the toolkit. |
Bug ID | Fixed Issue |
632242 | Fixed an issue where there was a small error (<0.1 dB) in computation of Channel EVM on 802.11ac and 802.11n MIMO signals. |
616590 | Fixed an issue where incorrect generator matrices were used for LPDC encoding for the following cases for 802.11n and 802.11ac standards:
|
635715 | Fixed an issue where in a 64-bit process, changing center frequency caused transmit spectrum mask test to give incorrect results. |
578886 | Fixed an issue in the transmit spectrum mask margin vector results of 802.11ac 80+80 MHz combined spectrum mask, there was no frequency offset at the center of the spectrum when the separation between carrier frequencies of the frequency segments was 160 MHz or 240 MHz. |
654463 | Fixed an issue where incorrect EVM numbers were reported for lower number of symbols for MIMO signals, when you set the OFDM Channel Estimation Method property to Preamble and Data. |
Bug ID | Fixed Issue |
576440 | Fixed an issue where an error message was not displayed when the Reference Data Constellation input was empty and the Combined Signal Demodulation was enabled. |
576138 | Fixed an error where the user-defined mask creation was incorrect if the start and end offset values were not equidistant from the center. |
572279 | Fixed an error where some payload properties were not getting saved in the TDMS file when the PPDU type was MU PPDU. |
572274 | Fixed an error where the spectral mask violation result was incorrect for 802.11ac, 80+80 MHz signal. |
569961 | Fixed an error where the power spectrum computation was incorrect when IQ In Port was used, and the IQ In Port Carrier Frequency was non-zero. |
528989 | Fixed an error where the niWLANA RFSA Auto Range VI retained a higher burst length value even after it encountered a lower sized burst when the VI was called again. |
Automating the Installation of NI Products
For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Using NI Software with Microsoft Windows 10
How to Use NI Software with Microsoft Windows 8.1
Legal Information
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
NI WLAN Generation Toolkit 18.0 Readme
New FeaturesNI WLAN Generation Toolkit 18.0 includes the following new features:
Support for multiuser configuration using RU allocation values for 802.11ax
Support for midambles in 802.11ax
Support for configuring Idle interval independent of RF blanking
Support for LabVIEW 2018 (32-bit and 64-bit)
Added power CCDF trace on Generation Soft Front Panel
NI WLAN Generation Toolkit 17.5 includes the following new features:
Support for UL MU-MIMO for 802.11ax
Support for 1x HE-LTF in 802.11ax
Support configuration of nominal packet padding for 802.11ax
Added trigger frame common parameters in 802.11ax as configurable parameters for trigger-based PPDU generation
Support for preamble puncturing in 802.11ax
NI WLAN Generation Toolkit 17.0 includes the following new features:
Support for IEEE Standard P802.11ax/D1.2
Support for all PPDUs of 802.11ax: Single-User (SU), Multi-User (MU), Extended Range SU and Trigger-Based PPDUs
Support for all channel bandwidths of 802.11ax: 20 MHz, 40 MHz, 80 MHz, 80+80 MHz and 160 MHz
Support for Downlink OFDMA and MU-MIMO for 802.11ax
Support for Uplink OFDMA for 802.11ax
Support for 8X8 MIMO for 802.11ax
Support for MCS 0 to 11 for 802.11ax
Support for Trigger Frame generation
Support for LabVIEW 2017 (32- and 64-bit)
NI WLAN Generation Toolkit 16.0 includes the following new features:
Support for LabVIEW 2016 (32- and 64-bit)
Support for 8x8 MIMO for IEEE Standard 802.11ac-2013 in the NI WLAN Generation Soft Front Panel
Supported Hardware
NI PXIe-5673
NI PXIe-5673E
NI PXIe-5644R
NI PXIe-5645R
NI PXIe-5646R
NI PXIe-5840
NI PXIe-5820
System RequirementsSupported Operating Systems
Windows 10/8.11/7 SP12 (32-bit and 64-bit)
Windows Embedded Standard 7 SP12 (32-bit and 64-bit)
Windows Server 2012 R21 (64-bit)
Windows Server 2008 R2 SP12 (64-bit)
Minimum Requirements
Processor—Pentium IV or equivalent
Free hard drive space—1 GB
RAM—2 GB
Microsoft Internet Explorer 8 or later
Supported RF vector signal generator with minimum 256 MB of arbitrary waveform generator onboard memory
Recommended System
Free hard drive space—2 GB
RAM—4 GB
Required Software
NI-RFSG 15.0 or later
NI LabVIEW Modulation Toolkit 15.0 or later
Application Development Environments (ADEs)
LabVIEW 2015 SP1, 2016, 2017 SP1 or 2018
LabWindows/CVI 8.5.1 or later
TestStand 4.2.0 for TestStand sequences
Installed Software, Documentation, and ExamplesInstalled Software
<NIDIR> is an alias for the following National Instruments file folder location:
(32-bit OS) Program FilesNational Instruments
(64-bit OS) Program Files (x86)National Instruments for 32-bit programs and Program FilesNational Instruments for 64-bit programs
<NIDocDir> is an alias for the following National Instruments file folder location: UsersPublicPublic DocumentsNational Instruments
<LabVIEW> is an alias for the following National Instruments file folder location:
Windows 10/Windows 8.1/Windows 7: <NIDIR>LabVIEW <year>
<SYSDIR> is an alias for the following file folder location:
(32-bit OS) windowssystem32
(64-bit OS) windowsSysWow64 for 32-bit programs and windowssystem32 for 64-bit programs
File Locations
Item | Installed Location |
WLAN Generation Soft Front Panel | <NIDIR>WLAN ToolkitWLAN Generation Soft Front Panel.exe |
DLL | <SYSDIR> |
WLAN Calibration Utility | <NIDIR>WLAN ToolkitCalibration UtilityWLAN Calibration Utility.exe |
LabVIEW | |
VIs | <LabVIEW>i.libRF ToolkitsWLAN |
Examples | <LabVIEW>examplesRF ToolkitsWLAN |
LabWindows/CVI | |
Header Files | <NIDIR>SharedCVIInclude |
Static Libraries | <NIDIR>SharedCVIinmsvc |
.lfp/.sub Files | <NIDIR>SharedCVIin |
Examples | <NIDocDir>CVIsamplesWLAN |
C | |
Header Files | <NIDIR>SharedExternalCompilerSupportCinclude |
Import Library | <NIDIR>SharedExternalCompilerSupportClib32msvc |
Examples | <NIDocDir>WLAN ToolkitExamplesCSamplesGeneration |
TestStand | |
Examples | <NIDIR>WLAN ToolkitTestStand |
Executable
Documentation
Document | Format | Description |
NI WLAN Generation Toolkit Help | HTML/Windows Help | Information about NI WLAN Generation Toolkit. The help file is an HTML version of a traditional user manual that includes the following information:
|
NI WLAN Generation Toolkit Readme | HTML (this document) | Information about supported hardware and operating systems, new features, fixed issues, and legal notices. |
Accessing VIs and Functions
Finding Examples
NI WLAN Generation Toolkit 18.0 Drops Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003
Product Security and Critical Updates
Toolkit Version Naming Changes
Uninstalling/Modifying NI WLAN Generation Toolkit
Launch the Control Panel by selecting Start»Control Panel.
Double-click Programs and Features.
Select National Instruments Software.
Click the Uninstall/Change button.
Select NI WLAN Generation Toolkit 18.0 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
Right-click on the Start button.
Select Control Panel.
Select Programs» Programs and Features.
Select National Instruments Software.
Click the Uninstall button.
Select NI WLAN Generation Toolkit 18.0 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
Behavior Changes
The behavior of the LO Frequency Offset Mode property with value Auto has been changed to address frequencies less than 2.4 GHz.
Application of time delay impairment has been changed to be relative among users.
The default value of the LO Sharing Enabled property has been changed to False.
RF blanking marker positions are written per waveform basis in TDMS.
Known Issues
Bug Fixes
Bug ID | Fixed Issue |
710003 | Fixed an issue where in multiframe generation of 802.11j or 802.11p standard, always fixed headroom of 12 dB is applied for the frames other than the first frame. |
703693 | Fixed an issue where the Tx Beamforming bit in the HE-SIG-B user info of the center 26 RU in 80 MHz/160 MHz was always set to 1. |
701203 | Fixed an issue where the number of data symbols value returned was incorrect for the standards 802.11b and 802.11g. |
701134 | Fixed an issue where the nominal packet padding in 802.11ax was 0 for 106 RU with DCM. |
700404 | Fixed an issue where the average power computation for headroom computation in ER SU PPDU with STBC was incorrect. |
641901 | Fixed an issue where AWGN applied was incorrect for 802.11ax MU users with power boost factor. |
517534 | Fixed an issue where windowing applied to the last OFDM symbol was improper in 802.11ac. |
Bug ID | Fixed Issue |
687075 | Fixed an issue where incorrect MAC padding was applied to 802.11ax when the LDPC extra symbol segment was equal to 1. |
648844 | Fixed an issue where the multi-user generation of trigger-based PPDU was incorrect when the number of space time streams was different across users. |
688689 | Fixed an issue where the waveform generated for IEEE 802.11ax was incorrect when you set the STBC All Streams Enabled property set to True and Guard Interval Type property to 1/8 or 1/16. |
Bug ID | Fixed Issue |
653492 | Fixed an issue where relative power application is incorrect for users in Trigger-based PPDU. |
647010 | Fixed an issue where AID12 value was incorrectly configured in the generated trigger frame. |
Bug ID | Fixed Issue |
616590 | Fixed an issue where incorrect generator matrices were used for LPDC encoding for the following cases for 802.11n and 802.11ac standards:
|
Bug ID | Fixed Issue |
575479 | Fixed an issue where the value of the MU Coding bit was incorrect when the corresponding MU NSTS field value was 0 in the VHT-SIG-A field of the 802.11ac signal. |
549495 | Fixed an issue where there was a spelling error in the name of the niWLANG RFSG Create and Download Waveforms (Multiple Channel) VI. |
Automating the Installation of NI Products
For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Using NI Software with Microsoft Windows 10
How to Use NI Software with Microsoft Windows 8.1
Legal Information
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.